U |
concentration of uranium
|
ug/m^3 |
no_bcodmo_term |
Eu_err |
Europium combined sampling and analytical error
|
ug/m^3 |
no_bcodmo_term |
Rb_err |
Rubidium combined sampling and analytical error
|
ug/m^3 |
no_bcodmo_term |
Th_err |
Thorium combined sampling and analytical error
|
ug/m^3 |
no_bcodmo_term |
Gd |
concentration of gadolinium
|
ug/m^3 |
no_bcodmo_term |
Yb |
concentration of ytterbium
|
ug/m^3 |
no_bcodmo_term |
Eu_dl |
Europium detection level:
a '1' indicates that while a peak was detected,
the isotope sample was below the level of detection relative
to background "noise". The element concentration reported
therefore represents the amount of the isotope which would
have had to have been present for it to have been detected.
a '0' indicates no flag - concentration is as measured.
|
|
no_bcodmo_term |
Rb_dl |
Rubidium detection level:
a '1' indicates that while a peak was detected,
the isotope sample was below the level of detection relative
to background "noise". The element concentration reported
therefore represents the amount of the isotope which would
have had to have been present for it to have been detected.
a '0' indicates no flag - concentration is as measured.
|
|
no_bcodmo_term |
Th_dl |
Thorium detection level:
a '1' indicates that while a peak was detected,
the isotope sample was below the level of detection relative
to background "noise". The element concentration reported
therefore represents the amount of the isotope which would
have had to have been present for it to have been detected.
a '0' indicates no flag - concentration is as measured.
|
|
no_bcodmo_term |
cruise |
Arabian Sea, Thomas Thompson cruise identifier
|
|
no_bcodmo_term |
Hf |
concentration of hafnium
|
ug/m^3 |
no_bcodmo_term |
Zn |
concentration of zinc
|
ug/m^3 |
no_bcodmo_term |
Fe_err |
Iron combined sampling and analytical error
|
ug/m^3 |
no_bcodmo_term |
Sb_err |
Antimony combined sampling and analytical error
|
ug/m^3 |
no_bcodmo_term |
Tm_err |
Thulium combined sampling and analytical error
|
ug/m^3 |
no_bcodmo_term |
date_begin |
date sampling pump turned on for a given sample,
|
as YYYYMMDD |
no_bcodmo_term |
Hg |
concentration of mercury
|
ug/m^3 |
no_bcodmo_term |
dust |
total sample mass estimated by assuming the Al content represented 8 percent, based on an 8% crustal average for Al
|
ug/m^3 |
no_bcodmo_term |
Fe_dl |
Iron detection level:
a '1' indicates that while a peak was detected,
the isotope sample was below the level of detection relative
to background "noise". The element concentration reported
therefore represents the amount of the isotope which would
have had to have been present for it to have been detected.
a '0' indicates no flag - concentration is as measured.
|
|
no_bcodmo_term |
Sb_dl |
Antimony detection level:
a '1' indicates that while a peak was detected,
the isotope sample was below the level of detection relative
to background "noise". The element concentration reported
therefore represents the amount of the isotope which would
have had to have been present for it to have been detected.
a '0' indicates no flag - concentration is as measured.
|
|
no_bcodmo_term |
Tm_dl |
Thulium detection level:
a '1' indicates that while a peak was detected,
the isotope sample was below the level of detection relative
to background "noise". The element concentration reported
therefore represents the amount of the isotope which would
have had to have been present for it to have been detected.
a '0' indicates no flag - concentration is as measured.
|
|
no_bcodmo_term |
date_end |
date sampling pump turned off for a given sample, as YYYYMMDD
|
|
no_bcodmo_term |
La |
concentration of lanthanum
|
ug/m^3 |
no_bcodmo_term |
As_err |
Arsenic combined sampling and analytical error
|
ug/m^3 |
no_bcodmo_term |
Gd_err |
Gadolinium combined sampling and analytical error
|
ug/m^3 |
no_bcodmo_term |
Sc_err |
Scandium combined sampling and analytical error
|
ug/m^3 |
no_bcodmo_term |
U_err |
Uranium combined sampling and analytical error
|
ug/m^3 |
no_bcodmo_term |
yrday |
day of year, 1995
|
|
no_bcodmo_term |
Lu |
concentration of lutetium
|
ug/m^3 |
no_bcodmo_term |
As_dl |
Arsenic detection level:
a '1' indicates that while a peak was detected,
the isotope sample was below the level of detection relative
to background "noise". The element concentration reported
therefore represents the amount of the isotope which would
have had to have been present for it to have been detected.
a '0' indicates no flag - concentration is as measured.
|
|
no_bcodmo_term |
Gd_dl |
Gadolinium detection level:
a '1' indicates that while a peak was detected,
the isotope sample was below the level of detection relative
to background "noise". The element concentration reported
therefore represents the amount of the isotope which would
have had to have been present for it to have been detected.
a '0' indicates no flag - concentration is as measured.
|
|
no_bcodmo_term |
Sc_dl |
Scandium detection level:
a '1' indicates that while a peak was detected,
the isotope sample was below the level of detection relative
to background "noise". The element concentration reported
therefore represents the amount of the isotope which would
have had to have been present for it to have been detected.
a '0' indicates no flag - concentration is as measured.
|
|
no_bcodmo_term |
U_dl |
Uranium detection level:
a '1' indicates that while a peak was detected,
the isotope sample was below the level of detection relative
to background "noise". The element concentration reported
therefore represents the amount of the isotope which would
have had to have been present for it to have been detected.
a '0' indicates no flag - concentration is as measured.
|
|
no_bcodmo_term |
lat_n |
Nominal latitude (minus indicates South)
|
decimal degrees |
no_bcodmo_term |
Nd |
concentration of neodymium
|
ug/m^3 |
no_bcodmo_term |
Br_err |
Bromine combined sampling and analytical error
|
ug/m^3 |
no_bcodmo_term |
Hf_err |
Hafnium combined sampling and analytical error
|
ug/m^3 |
no_bcodmo_term |
Se_err |
Selenium combined sampling and analytical error
|
ug/m^3 |
no_bcodmo_term |
Yb_err |
Ytterbium combined sampling and analytical error
|
ug/m^3 |
no_bcodmo_term |
lon_n |
Nominal longitude (minus indicates West)
|
decimal degrees |
no_bcodmo_term |
Rb |
concentration of rubidium
|
ug/m^3 |
no_bcodmo_term |
Sb |
concentration of antimony
|
ug/m^3 |
no_bcodmo_term |
Br_dl |
Bromine detection level:
a '1' indicates that while a peak was detected,
the isotope sample was below the level of detection relative
to background "noise". The element concentration reported
therefore represents the amount of the isotope which would
have had to have been present for it to have been detected.
a '0' indicates no flag - concentration is as measured.
|
|
no_bcodmo_term |
Hf_dl |
Hafnium detection level:
a '1' indicates that while a peak was detected,
the isotope sample was below the level of detection relative
to background "noise". The element concentration reported
therefore represents the amount of the isotope which would
have had to have been present for it to have been detected.
a '0' indicates no flag - concentration is as measured.
|
|
no_bcodmo_term |
Se_dl |
Selenium detection level:
a '1' indicates that while a peak was detected,
the isotope sample was below the level of detection relative
to background "noise". The element concentration reported
therefore represents the amount of the isotope which would
have had to have been present for it to have been detected.
a '0' indicates no flag - concentration is as measured.
|
|
no_bcodmo_term |
Yb_dl |
Ytterbium detection level:
a '1' indicates that while a peak was detected,
the isotope sample was below the level of detection relative
to background "noise". The element concentration reported
therefore represents the amount of the isotope which would
have had to have been present for it to have been detected.
a '0' indicates no flag - concentration is as measured.
|
|
no_bcodmo_term |
vol_pump |
volume of air pumped to accumulate sample
|
cubic meters |
no_bcodmo_term |
Sc |
concentration of scandium
|
ug/m^3 |
no_bcodmo_term |
Ce_err |
Cerium combined sampling and analytical error
|
ug/m^3 |
no_bcodmo_term |
Hg_err |
Mercury combined sampling and analytical error
|
ug/m^3 |
no_bcodmo_term |
Sm_err |
Samarium combined sampling and analytical error
|
ug/m^3 |
no_bcodmo_term |
Zn_err |
Zinc combined sampling and analytical error
|
ug/m^3 |
no_bcodmo_term |
Se |
concentration of selenium
|
ug/m^3 |
no_bcodmo_term |
Ce_dl |
Cerium detection level:
a '1' indicates that while a peak was detected,
the isotope sample was below the level of detection relative
to background "noise". The element concentration reported
therefore represents the amount of the isotope which would
have had to have been present for it to have been detected.
a '0' indicates no flag - concentration is as measured.
|
|
no_bcodmo_term |
Hg_dl |
Mercury detection level:
a '1' indicates that while a peak was detected,
the isotope sample was below the level of detection relative
to background "noise". The element concentration reported
therefore represents the amount of the isotope which would
have had to have been present for it to have been detected.
a '0' indicates no flag - concentration is as measured.
|
|
no_bcodmo_term |
Sm_dl |
Samarium detection level:
a '1' indicates that while a peak was detected,
the isotope sample was below the level of detection relative
to background "noise". The element concentration reported
therefore represents the amount of the isotope which would
have had to have been present for it to have been detected.
a '0' indicates no flag - concentration is as measured.
|
|
no_bcodmo_term |
Zn_dl |
Zinc detection level:
a '1' indicates that while a peak was detected,
the isotope sample was below the level of detection relative
to background "noise". The element concentration reported
therefore represents the amount of the isotope which would
have had to have been present for it to have been detected.
a '0' indicates no flag - concentration is as measured.
|
|
no_bcodmo_term |
Br |
concentration of bromine
|
ug/m^3 |
no_bcodmo_term |
Sm |
concentration of samarium
|
ug/m^3 |
no_bcodmo_term |
Co_err |
Cobalt combined sampling and analytical error
|
ug/m^3 |
no_bcodmo_term |
La_err |
Lanthanum combined sampling and analytical error
|
ug/m^3 |
no_bcodmo_term |
Sr_err |
Strontium combined sampling and analytical error
|
ug/m^3 |
no_bcodmo_term |
Ce |
concentration of cerium
|
ug/m^3 |
no_bcodmo_term |
Sr |
concentration of strontium
|
ug/m^3 |
no_bcodmo_term |
Co_dl |
Cobalt detection level:
a '1' indicates that while a peak was detected,
the isotope sample was below the level of detection relative
to background "noise". The element concentration reported
therefore represents the amount of the isotope which would
have had to have been present for it to have been detected.
a '0' indicates no flag - concentration is as measured.
|
|
no_bcodmo_term |
La_dl |
Lanthanum detection level:
a '1' indicates that while a peak was detected,
the isotope sample was below the level of detection relative
to background "noise". The element concentration reported
therefore represents the amount of the isotope which would
have had to have been present for it to have been detected.
a '0' indicates no flag - concentration is as measured.
|
|
no_bcodmo_term |
Sr_dl |
Strontium detection level:
a '1' indicates that while a peak was detected,
the isotope sample was below the level of detection relative
to background "noise". The element concentration reported
therefore represents the amount of the isotope which would
have had to have been present for it to have been detected.
a '0' indicates no flag - concentration is as measured.
|
|
no_bcodmo_term |
Co |
concentration of cobolt
|
ug/m^3 |
no_bcodmo_term |
Ta |
concentration of tantalum
|
ug/m^3 |
no_bcodmo_term |
Cr_err |
Chromium combined sampling and analytical error
|
ug/m^3 |
no_bcodmo_term |
Lu_err |
Lutetium combined sampling and analytical error
|
ug/m^3 |
no_bcodmo_term |
Ta_err |
Tantalum combined sampling and analytical error
|
ug/m^3 |
no_bcodmo_term |
Cr |
concentration of chromium
|
ug/m^3 |
no_bcodmo_term |
Tb |
concentration of terbium
|
ug/m^3 |
no_bcodmo_term |
Cr_dl |
Chromium detection level:
a '1' indicates that while a peak was detected,
the isotope sample was below the level of detection relative
to background "noise". The element concentration reported
therefore represents the amount of the isotope which would
have had to have been present for it to have been detected.
a '0' indicates no flag - concentration is as measured.
|
|
no_bcodmo_term |
Lu_dl |
Lutetium detection level:
a '1' indicates that while a peak was detected,
the isotope sample was below the level of detection relative
to background "noise". The element concentration reported
therefore represents the amount of the isotope which would
have had to have been present for it to have been detected.
a '0' indicates no flag - concentration is as measured.
|
|
no_bcodmo_term |
Ta_dl |
Tantalum detection level:
a '1' indicates that while a peak was detected,
the isotope sample was below the level of detection relative
to background "noise". The element concentration reported
therefore represents the amount of the isotope which would
have had to have been present for it to have been detected.
a '0' indicates no flag - concentration is as measured.
|
|
no_bcodmo_term |
Cs |
concentration of cesium
|
ug/m^3 |
no_bcodmo_term |
Th |
concentration of thorium
|
ug/m^3 |
no_bcodmo_term |
Cs_err |
Cesium combined sampling and analytical error
|
ug/m^3 |
no_bcodmo_term |
Nd_err |
Neodymium combined sampling and analytical error
|
ug/m^3 |
no_bcodmo_term |
Tb_err |
Terbium combined sampling and analytical error
|
ug/m^3 |
no_bcodmo_term |
Eu |
concentration of europium
|
ug/m^3 |
no_bcodmo_term |
Tm |
concentration of thulium
|
ug/m^3 |
no_bcodmo_term |
Cs_dl |
Cesium detection level:
a '1' indicates that while a peak was detected,
the isotope sample was below the level of detection relative
to background "noise". The element concentration reported
therefore represents the amount of the isotope which would
have had to have been present for it to have been detected.
a '0' indicates no flag - concentration is as measured.
|
|
no_bcodmo_term |
Nd_dl |
Neodymium detection level:
a '1' indicates that while a peak was detected,
the isotope sample was below the level of detection relative
to background "noise". The element concentration reported
therefore represents the amount of the isotope which would
have had to have been present for it to have been detected.
a '0' indicates no flag - concentration is as measured.
|
|
no_bcodmo_term |
Tb_dl |
Terbium detection level:
a '1' indicates that while a peak was detected,
the isotope sample was below the level of detection relative
to background "noise". The element concentration reported
therefore represents the amount of the isotope which would
have had to have been present for it to have been detected.
a '0' indicates no flag - concentration is as measured.
|
|
no_bcodmo_term |
Fe |
concentration of iron
|
ug/m^3 |
no_bcodmo_term |
As |
concentration of arsenic
|
ug/m^3 |
As |