Note: Stations 1, 3, and 5 were at a drogue. For stations 2 and 4, the ship moved about 1 kilometer away from the drogue. When station 2 was sampled, the drogue had moved east of it and sampling occurred up-current from the drogue. Tide was ebb --> slack --> flood.
\n--------------------
\nHeader Information from Sea-Bird SBE19 Data File:
\nSoftware Version 1.59
\nTemperature SN = 504; Conductivity SN = 504
SEACAT PROFILER V2.1e SN 504 05/30/12 13:51:21.934
\npressure sensor: serial no = 184805, range = 100 psia, tc = -585
\nclk = 32767.742 iop = 142 vmain = 11.9 vlith = 5.3
\nncasts = 5 samples = 1684 free = 19973 lwait = 0 msec
\nsample rate = 1 scan every 0.5 seconds
\nminimum raw conductivity frequency for pump turn on = 0 hertz; pump delay = 30 seconds
\nbattery cutoff = 7.2 volts; number of voltages sampled = 4
cast 0: 05/30 09:50:19 samples 0 to 388 nquan = 7 nvalues = 389
\ncast 1: 05/30 10:53:36 samples 389 to 774 nquan = 7 nvalues = 386
\ncast 2: 05/30 11:23:25 samples 775 to 1113 nquan = 7 nvalues = 339
\ncast 3: 05/30 11:46:51 samples 1114 to 1358 nquan = 7 nvalues = 245
\ncast 4: 05/30 12:12:29 samples 1359 to 1683 nquan = 7 nvalues = 325
units = specified
\nname 0 = sigma-t00: Density [sigma-t, Kg/m^3 ]
\nname 1 = depSM: Depth [salt water, m], lat = 41.00
\nname 2 = wetStar: Fluorescence, WET Labs WETstar [mg/m^3]
\nname 3 = sal00: Salinity, Practical [PSU]
\nname 4 = t090C: Temperature [ITS-90, deg C]
\nname 5 = timeS: Time, Elapsed [seconds]
\nname 6 = flag: 0.000e+00
interval = seconds: 0.5; bad_flag = -9.990e-29
\nsensor 1 = Frequency 0, Temperature; Temp. Sensor ID: 55; SerialNumber: 504;
\nCalibrationDate: 28-Jan-11
sensor = 2 Frequency 1, Conductivity; Cond. Sensor ID: 3; SerialNumber: 504;
\nCalibrationDate: 28-Jan-11
sensor = 3 A/D voltage 0, Oxygen Current, Beckman/YSI; Oxygen Sensor ID: 36; SerialNumber: 230238;
\nCalibrationDate: 21-Mar-2011
sensor = 4 A/D voltage 1, Oxygen Temperature, Beckman/YSI; Oxygen Sensor ID: 39; SerialNumber: 230238;
\nCalibrationDate: 21-Mar-2011
sensor = 5 A/D voltage 2, Fluorometer, WET Labs WETstar; FluoroWetlabWetstar Sensor ID: 21; SerialNumber: WS3S-166;
\nCalibrationDate: 23-Feb-2011; ScaleFactor: 15.400
sensor = 6 A/D voltage 3, Free
\nsensor = 7 Pressure voltage, Pressure, Strain Gauge; Pressure Sensor ID: 49; SerialNumber: 504;
\nCalibrationDate: 04-Feb-11
datcnv_skipover = 0
\n-----------
Temperature, salinity, fluorescence, and sigma-t density measured by CTD are reported for 5 stations in Fisher's Island Sound.
Only downcast data is included; surface equilibration has been edited out.
\nThe WetStar Fluorometer calibrated by Seabird (Feb 2011) was NOT validated with contemporaneous filtered samples, so values reported should be considered relative. CTD data was processed with SeaBird software.