http://lod.bco-dmo.org/id/dataset/2319
eng; USA
utf8
dataset
Highest level of data collection, from a common set of sensors or instrumentation, usually within the same research project
Biological and Chemical Oceanography Data Management Office (BCO-DMO)
Unavailable
508-289-2009
WHOI MS#36
Woods Hole
MA
02543
USA
info@bco-dmo.org
http://www.bco-dmo.org
Monday - Friday 8:00am - 5:00pm
For questions regarding this resource, please contact BCO-DMO via the email address provided.
pointOfContact
2009-11-25
ISO 19115-2 Geographic Information - Metadata - Part 2: Extensions for Imagery and Gridded Data
ISO 19115-2:2009(E)
Meteorology and sea surface temperature (MET) 15 minute averaged data from twenty R/V Endeavor and R/V Oceanus cruises in the Gulf of Maine and Georges Bank area during 1999 (GB project)
2004-04-29
publication
2004-04-29
revision
National Oceanographic Data Center (NODC)
2013-04-16
publication
http://accession.nodc.noaa.gov/0104427
Marine Biological Laboratory/Woods Hole Oceanographic Institution Library (MBLWHOI DLA)
2019-02-20
publication
https://doi.org/10.1575/1912/bco-dmo.2319.1
Dr Richard Payne
Woods Hole Oceanographic Institution
principalInvestigator
Biological and Chemical Oceanography Data Management Office (BCO-DMO)
Unavailable
508-289-2009
WHOI MS#36
Woods Hole
MA
02543
USA
info@bco-dmo.org
http://www.bco-dmo.org
Monday - Friday 8:00am - 5:00pm
For questions regarding this resource, please contact BCO-DMO via the email address provided.
publisher
Cite this dataset as: Payne, R. (2004) Meteorology and sea surface temperature (MET) 15 minute averaged data from twenty R/V Endeavor and R/V Oceanus cruises in the Gulf of Maine and Georges Bank area during 1999 (GB project). Biological and Chemical Oceanography Data Management Office (BCO-DMO). (Version 1) Version Date 2004-04-29 [if applicable, indicate subset used]. doi:10.1575/1912/bco-dmo.2319.1 [access date]
MET 15 minute averaged data from 1999 cruises Dataset Description: <h2>Continuous along track meteorology and sea surface data,<br />
15 minute averaged values, 1999</h2>
<pre>
<strong>Processed by:</strong>
Richard Payne
Woods Hole Oceanographic Institution
Woods Hole, MA 20543
<a href="mailto:rpayne@whoi.edu">rpayne@whoi.edu</a>
Additional
<a href="http://globec.whoi.edu/globec-dir/data_doc/additional_endeavor_processing_details.html">data processing notes</a> are available.
</pre>
<p>The sea surface temperature as measured by the hull sensor is not shown since the sea surface temperature as measured via the engine inlet (field name is temp_ss1) is more accurate.</p>
<h3>Processing Notes</h3>
<ol>
<li>Concatenate daily 1 minute files into one file for whole cruise</li>
<li>Edit file for obvious bad data, i.e., missing data, garbage characters, etc.</li>
<li>Run program which reformats data. Output parameters:<br />
Year day, lat, long, Speed made good, course made good, gyro 1 &amp; 2, Edo speed, Edo indicator, port wind speed, starboard ws, port wind azimuth, starboard waz, air temp, relative humidity, barometric pressure, sea surface temp @5m &amp; 1m depth, Edo depth, Chirp sonar depth.</li>
<li>Put plots of all parameters on screen and look for obvious single bad points. Edit in basic concatenated file. Except I have not edited depths.</li>
<li>Iterate steps 2-4 until no more obvious bad points.</li>
<li>Run second program which computes true wind speed and direction from speed and course made good, gyros, larger of port or starboard ws and accompanying wind azimuth. Outputs are year day, lat lon, speed and course made good, gyro, relative ws and direction, true ws and direction, air temp, relative humidity, barometric pressure, short- and long-wave radiation,5m and 1m sea surface temps, Edo depth, Chirp sonar depth, Edo speed, Edo indicator.</li>
<li>Check plots of true wind speed and direction to make sure they look ok.</li>
<li>Run vector averaging program which produces 60 minute series. The program uses 60 consecutive records and does not check for missing records. I have not carried depths since hourly averages do not seem useful nor Edo speeds since they seem pretty generally useless. Output parameters are: Year day, lat, long, true wind speed and direction, air temp, relative humidity, barometric pressure, short- and long-wave radiation, sea surface temp @ 5m &amp; 1m.</li>
</ol>
<p><em>From: Richard E. Payne, May 28, 1999<br />
Updated: April 29, 2004; G.Heimerdinger </em></p> Methods and Sampling: <p>The sea surface temperature as measured by the hull sensor is not shown since the sea surface temperature as measured via the engine inlet (field name is temp_ss1) is more accurate.</p>
Funding provided by National Science Foundation (NSF) Award Number: unknown GB NSF
Funding provided by National Oceanic and Atmospheric Administration (NOAA) Award Number: unknown GB NOAA
completed
Dr Richard Payne
Woods Hole Oceanographic Institution
Woods Hole
Ma
02543
USA
rpayne@whoi.edu
pointOfContact
asNeeded
Dataset Version: 1
Unknown
cruiseid
year
si
month_gmt
day_gmt
time_gmt
lat
lon
depth_w
depth_cs
wind_speed_c
wind_dir_c
wind_speed_r
wind_dir_r
temp_air
humidity
press_bar
precip_level
ed_sw
ed_lw
temp_ss1
temp_ss3
temp_ss5
cond_mM
sal_ss3
yrday_gmt
numb_records
Thermosalinograph
theme
None, User defined
cruise id
year
investigator
month_gmt
day_gmt
time_gmt
latitude
longitude
depth_w
depth of chirp sonar
wind_speed_c
wind_dir_c
relative wind speed
wind_dir_r
air temperature
humidity
barometric pressure
precip_level
downward short wave irradiance
downward long wave irradiance
SST at 1m
SST at 3m
SST at 5m
cond_mM
sal_ss3
day of year and decimal time (time zone GMT)
No BCO-DMO term
featureType
BCO-DMO Standard Parameters
Thermosalinograph
instrument
BCO-DMO Standard Instruments
EN319
EN320
EN321
EN322
EN323
EN324
EN325
EN330
EN331
OC336
OC338
OC339
OC340
OC341
OC342
OC343
OC344
OC345
OC346
OC347
service
Deployment Activity
Gulf of Maine and Georges Bank
place
Locations
otherRestrictions
otherRestrictions
Access Constraints: none. Use Constraints: Please follow guidelines at: http://www.bco-dmo.org/terms-use Distribution liability: Under no circumstances shall BCO-DMO be liable for any direct, incidental, special, consequential, indirect, or punitive damages that result from the use of, or the inability to use, the materials in this data submission. If you are dissatisfied with any materials in this data submission your sole and exclusive remedy is to discontinue use.
U.S. GLOBal ocean ECosystems dynamics
http://www.usglobec.org/
U.S. GLOBal ocean ECosystems dynamics
U.S. GLOBEC (GLOBal ocean ECosystems dynamics) is a research program organized by oceanographers and fisheries scientists to address the question of how global climate change may affect the abundance and production of animals in the sea.
The U.S. GLOBEC Program currently had major research efforts underway in the Georges Bank / Northwest Atlantic Region, and the Northeast Pacific (with components in the California Current and in the Coastal Gulf of Alaska). U.S. GLOBEC was a major contributor to International GLOBEC efforts in the Southern Ocean and Western Antarctic Peninsula (WAP).
U.S. GLOBEC
largerWorkCitation
program
U.S. GLOBEC Georges Bank
http://globec.whoi.edu/globec_program.html
U.S. GLOBEC Georges Bank
<p>The U.S. GLOBEC <a href="http://globec.whoi.edu/globec-dir/about_georges_bank.html">Georges Bank</a> Program is a large multi- disciplinary multi-year oceanographic effort. The proximate goal is to understand the population dynamics of key species on the Bank - Cod, <a href="http://globec.whoi.edu/images/haddock103.07.gif">Haddock</a>, and two species of zooplankton (<a href="http://globec.whoi.edu/images/calanus-finmarchicus.html"><em>Calanus finmarchicus</em></a> and <a href="http://globec.whoi.edu/images/pseudocalanus.html"><em>Pseudocalanus</em></a>) - in terms of their coupling to the physical environment and in terms of their <a href="http://globec.whoi.edu/images/targetpp.gif">predators and prey</a>. The ultimate goal is to be able to predict changes in the distribution and abundance of these species as a result of changes in their physical and biotic environment as well as to anticipate how their populations might respond to climate change.</p>
<p>The effort is substantial, requiring broad-scale surveys of the entire Bank, and process studies which focus both on the links between the target species and their physical environment, and the determination of fundamental aspects of these species' life history (birth rates, growth rates, death rates, etc).</p>
<p>Equally important are the modelling efforts that are ongoing which seek to provide realistic predictions of the flow field and which utilize the life history information to produce an integrated view of the dynamics of the populations.</p>
<p>The U.S. GLOBEC Georges Bank <a href="http://globec.whoi.edu/globec-dir/EXCO.html">Executive Committee (EXCO)</a> provides program leadership and effective communication with the funding agencies.</p>
GB
largerWorkCitation
project
eng; USA
oceans
Gulf of Maine and Georges Bank
-71.4241
-65.474
39.8457
43.9127
1999-02-21
1999-12-14
Georges Bank, Gulf of Maine, Northwest Atlantic Ocean
0
BCO-DMO catalogue of parameters from Meteorology and sea surface temperature (MET) 15 minute averaged data from twenty R/V Endeavor and R/V Oceanus cruises in the Gulf of Maine and Georges Bank area during 1999 (GB project)
Biological and Chemical Oceanography Data Management Office (BCO-DMO)
Unavailable
508-289-2009
WHOI MS#36
Woods Hole
MA
02543
USA
info@bco-dmo.org
http://www.bco-dmo.org
Monday - Friday 8:00am - 5:00pm
For questions regarding this resource, please contact BCO-DMO via the email address provided.
pointOfContact
http://lod.bco-dmo.org/id/dataset-parameter/6984.rdf
Name: cruiseid
Units: unknown
Description: <p> cruise identifier</p>
http://lod.bco-dmo.org/id/dataset-parameter/6985.rdf
Name: year
Units: unknown
Description: <p> year, GMT e.g. 1997.</p>
http://lod.bco-dmo.org/id/dataset-parameter/6986.rdf
Name: si
Units: unknown
Description: <p>scientific investigator responsible for this cruise</p>
http://lod.bco-dmo.org/id/dataset-parameter/6987.rdf
Name: month_gmt
Units: unknown
Description: <p> month of year, GMT e.g. 6 is June</p>
http://lod.bco-dmo.org/id/dataset-parameter/6988.rdf
Name: day_gmt
Units: unknown
Description: <p> day of month, GMT</p>
http://lod.bco-dmo.org/id/dataset-parameter/6989.rdf
Name: time_gmt
Units: hoursandminutes
Description: <p> time of day, GMT, 24 hour clock</p>
http://lod.bco-dmo.org/id/dataset-parameter/6990.rdf
Name: lat
Units: decimaldegrees
Description: <p> latitude, south is negative</p>
http://lod.bco-dmo.org/id/dataset-parameter/6991.rdf
Name: lon
Units: decimaldegrees
Description: <p> longitude, west is negative</p>
http://lod.bco-dmo.org/id/dataset-parameter/6992.rdf
Name: depth_w
Units: meters
Description: <p> water depth</p>
http://lod.bco-dmo.org/id/dataset-parameter/6993.rdf
Name: depth_cs
Units: meters
Description: <p> Chirp Sonar water depth</p>
http://lod.bco-dmo.org/id/dataset-parameter/6994.rdf
Name: wind_speed_c
Units: meters/second
Description: <p>wind speed corrected for ship's motion</p>
http://lod.bco-dmo.org/id/dataset-parameter/6995.rdf
Name: wind_dir_c
Units: degrees
Description: <p> wind direction, meteorologic convention, corrected for ship's motion</p>
http://lod.bco-dmo.org/id/dataset-parameter/6996.rdf
Name: wind_speed_r
Units: meters/second
Description: <p> wind speed, relative to ship</p>
http://lod.bco-dmo.org/id/dataset-parameter/6997.rdf
Name: wind_dir_r
Units: degrees
Description: <p> wind direction, relative to ship, meteorologic convention</p>
http://lod.bco-dmo.org/id/dataset-parameter/6998.rdf
Name: temp_air
Units: degreesC
Description: <p> air temperature</p>
http://lod.bco-dmo.org/id/dataset-parameter/6999.rdf
Name: humidity
Units: percent
Description: <p> relative humidity</p>
http://lod.bco-dmo.org/id/dataset-parameter/7000.rdf
Name: press_bar
Units: millibars
Description: <p> barometric pressure</p>
http://lod.bco-dmo.org/id/dataset-parameter/7001.rdf
Name: precip_level
Units: centimeters
Description: <p>level in the precipitation gauge, total precipitation between two times is the difference in levels (+50 cm if the gauge self-siphoned)</p>
http://lod.bco-dmo.org/id/dataset-parameter/7002.rdf
Name: ed_sw
Units: watts/meter^2/second
Description: <p>short wave downward irradiance</p>
http://lod.bco-dmo.org/id/dataset-parameter/7003.rdf
Name: ed_lw
Units: watts/meter^2/second
Description: <p>long wave downward irradiance</p>
http://lod.bco-dmo.org/id/dataset-parameter/7004.rdf
Name: temp_ss1
Units: degreesC
Description: <p>sea surface temperature 1 meter below t he surface</p>
http://lod.bco-dmo.org/id/dataset-parameter/7005.rdf
Name: temp_ss3
Units: degreesC
Description: <p>sea surface temperature 3 meters below the surface</p>
http://lod.bco-dmo.org/id/dataset-parameter/7006.rdf
Name: temp_ss5
Units: degreesC
Description: <p>sea surface temperature 5 meters below the surface</p>
http://lod.bco-dmo.org/id/dataset-parameter/7007.rdf
Name: cond_mM
Units: mmho/centimeter
Description: <p>sea surface conductivity</p>
http://lod.bco-dmo.org/id/dataset-parameter/7008.rdf
Name: sal_ss3
Units: PSU
Description: <p>sea surface salinity, nominally measured at 3 meters</p>
http://lod.bco-dmo.org/id/dataset-parameter/7009.rdf
Name: yrday_gmt
Units: decimalday
Description: <p> Julian day, GMT e.g. 29.5 is January 29 at 1200 hours</p>
http://lod.bco-dmo.org/id/dataset-parameter/7010.rdf
Name: numb_records
Units: unknown
Description: <p>number of records used to compute this value</p>
GB/NERC/BODC > British Oceanographic Data Centre, Natural Environment Research Council, United Kingdom
Biological and Chemical Oceanography Data Management Office (BCO-DMO)
Unavailable
508-289-2009
WHOI MS#36
Woods Hole
MA
02543
USA
info@bco-dmo.org
http://www.bco-dmo.org
Monday - Friday 8:00am - 5:00pm
For questions regarding this resource, please contact BCO-DMO via the email address provided.
pointOfContact
3526095
https://darchive.mblwhoilibrary.org/bitstream/1912/23694/1/dataset-2319_emetw151999__v1.tsv
download
https://doi.org/10.1575/1912/bco-dmo.2319.1
download
onLine
dataset
<p>The sea surface temperature as measured by the hull sensor is not shown since the sea surface temperature as measured via the engine inlet (field name is temp_ss1) is more accurate.</p>
from Cruise: EN319 The sea surface temperature as measured by the hull sensor is not shown since the sea surface temperature as measured via the engine inlet (field name is temp_ss1) is more accurate.
from Cruise: EN320 The sea surface temperature as measured by the hull sensor is not shown since the sea surface temperature as measured via the engine inlet (field name is temp_ss1) is more accurate.
from Cruise: EN321 The sea surface temperature as measured by the hull sensor is not shown since the sea surface temperature as measured via the engine inlet (field name is temp_ss1) is more accurate.
from Cruise: EN322 The sea surface temperature as measured by the hull sensor is not shown since the sea surface temperature as measured via the engine inlet (field name is temp_ss1) is more accurate.
from Cruise: EN323 The sea surface temperature as measured by the hull sensor is not shown since the sea surface temperature as measured via the engine inlet (field name is temp_ss1) is more accurate.
from Cruise: EN324 The sea surface temperature as measured by the hull sensor is not shown since the sea surface temperature as measured via the engine inlet (field name is temp_ss1) is more accurate.
from Cruise: EN325 The sea surface temperature as measured by the hull sensor is not shown since the sea surface temperature as measured via the engine inlet (field name is temp_ss1) is more accurate.
from Cruise: EN330 The sea surface temperature as measured by the hull sensor is not shown since the sea surface temperature as measured via the engine inlet (field name is temp_ss1) is more accurate.
from Cruise: EN331 The sea surface temperature as measured by the hull sensor is not shown since the sea surface temperature as measured via the engine inlet (field name is temp_ss1) is more accurate.
from Cruise: OC336 The sea surface temperature as measured by the hull sensor is not shown since the sea surface temperature as measured via the engine inlet (field name is temp_ss1) is more accurate.
from Cruise: OC338 The sea surface temperature as measured by the hull sensor is not shown since the sea surface temperature as measured via the engine inlet (field name is temp_ss1) is more accurate.
from Cruise: OC339 The sea surface temperature as measured by the hull sensor is not shown since the sea surface temperature as measured via the engine inlet (field name is temp_ss1) is more accurate.
from Cruise: OC340 The sea surface temperature as measured by the hull sensor is not shown since the sea surface temperature as measured via the engine inlet (field name is temp_ss1) is more accurate.
from Cruise: OC341 The sea surface temperature as measured by the hull sensor is not shown since the sea surface temperature as measured via the engine inlet (field name is temp_ss1) is more accurate.
from Cruise: OC342 The sea surface temperature as measured by the hull sensor is not shown since the sea surface temperature as measured via the engine inlet (field name is temp_ss1) is more accurate.
from Cruise: OC343 The sea surface temperature as measured by the hull sensor is not shown since the sea surface temperature as measured via the engine inlet (field name is temp_ss1) is more accurate.
from Cruise: OC344 The sea surface temperature as measured by the hull sensor is not shown since the sea surface temperature as measured via the engine inlet (field name is temp_ss1) is more accurate.
from Cruise: OC345 The sea surface temperature as measured by the hull sensor is not shown since the sea surface temperature as measured via the engine inlet (field name is temp_ss1) is more accurate.
from Cruise: OC346 The sea surface temperature as measured by the hull sensor is not shown since the sea surface temperature as measured via the engine inlet (field name is temp_ss1) is more accurate.
from Cruise: OC347 The sea surface temperature as measured by the hull sensor is not shown since the sea surface temperature as measured via the engine inlet (field name is temp_ss1) is more accurate.
Specified by the Principal Investigator(s)
<ol>
<li>Concatenate daily 1 minute files into one file for whole cruise</li>
<li>Edit file for obvious bad data, i.e., missing data, garbage characters, etc.</li>
<li>Run program which reformats data. Output parameters:<br />
Year day, lat, long, Speed made good, course made good, gyro 1 &amp; 2, Edo speed, Edo indicator, port wind speed, starboard ws, port wind azimuth, starboard waz, air temp, relative humidity, barometric pressure, sea surface temp @5m &amp; 1m depth, Edo depth, Chirp sonar depth.</li>
<li>Put plots of all parameters on screen and look for obvious single bad points. Edit in basic concatenated file. Except I have not edited depths.</li>
<li>Iterate steps 2-4 until no more obvious bad points.</li>
<li>Run second program which computes true wind speed and direction from speed and course made good, gyros, larger of port or starboard ws and accompanying wind azimuth. Outputs are year day, lat lon, speed and course made good, gyro, relative ws and direction, true ws and direction, air temp, relative humidity, barometric pressure, short- and long-wave radiation,5m and 1m sea surface temps, Edo depth, Chirp sonar depth, Edo speed, Edo indicator.</li>
<li>Check plots of true wind speed and direction to make sure they look ok.</li>
<li>Run vector averaging program which produces 60 minute series. The program uses 60 consecutive records and does not check for missing records. I have not carried depths since hourly averages do not seem useful nor Edo speeds since they seem pretty generally useless. Output parameters are: Year day, lat, long, true wind speed and direction, air temp, relative humidity, barometric pressure, short- and long-wave radiation, sea surface temp @ 5m &amp; 1m.</li>
</ol>
<pre>
Edo depth error correction: replace bad value with previous value.
EN323 - Good data. Air temp noisy. The noise has been traced to stack
gases passing over the RH and AT sensors as the ship turns. This
causes the AT to be momentarily anomalously high and the RH low.
Edo depth not useful.
EN323 GLOBEC --- --- --- --- --- --- --- --- --- ---
</pre>
from Cruise: EN319 <ol>
<li>Concatenate daily 1 minute files into one file for whole cruise
<li>Edit file for obvious bad data, i.e., missing data, garbage
characters, etc.
<li>Run program which reformats data. Output parameters:<br>
Year day, lat, long, Speed made good, course made good, gyro 1 & 2,
Edo speed, Edo indicator, port wind speed, starboard ws, port wind
azimuth, starboard waz, air temp, relative humidity, barometric
pressure, sea surface temp @5m & 1m depth, Edo depth, Chirp sonar depth.
<li>Put plots of all parameters on screen and look for obvious single bad
points. Edit in basic concatenated file. Except I have not edited
depths.
<li>Iterate steps 2-4 until no more obvious bad points.
<li>Run second program which computes true wind speed and direction from
speed and course made good, gyros, larger of port or starboard ws and
accompanying wind azimuth. Outputs are year day, lat lon, speed and
course made good, gyro, relative ws and direction, true ws and
direction, air temp, relative humidity, barometric pressure, short- and
long-wave radiation,5m and 1m sea surface temps, Edo depth, Chirp sonar
depth, Edo speed, Edo indicator.
<li>Check plots of true wind speed and direction to make sure they look
ok.
<li>Run vector averaging program which produces 60 minute series. The
program uses 60 consecutive records and does not check for missing
records. I have not carried depths since hourly averages do not seem
useful nor Edo speeds since they seem pretty generally useless. Output
parameters are: Year day, lat, long, true wind speed and direction, air
temp, relative humidity, barometric pressure, short- and long-wave
radiation, sea surface temp @ 5m & 1m.
</li></ol>
<pre>
Edo depth error correction: replace bad value with previous value.
EN319 - Excellent data but no useful Edo depths.
Cruise Exp Spds Dirs AT RH BP SST SWR Prec SSC SSAL
EN319 GLOBEC --- --- --- --- --- --- --- --- --- ---
</pre>
from Cruise: EN320 <ol>
<li>Concatenate daily 1 minute files into one file for whole cruise
<li>Edit file for obvious bad data, i.e., missing data, garbage
characters, etc.
<li>Run program which reformats data. Output parameters:<br>
Year day, lat, long, Speed made good, course made good, gyro 1 & 2,
Edo speed, Edo indicator, port wind speed, starboard ws, port wind
azimuth, starboard waz, air temp, relative humidity, barometric
pressure, sea surface temp @5m & 1m depth, Edo depth, Chirp sonar depth.
<li>Put plots of all parameters on screen and look for obvious single bad
points. Edit in basic concatenated file. Except I have not edited
depths.
<li>Iterate steps 2-4 until no more obvious bad points.
<li>Run second program which computes true wind speed and direction from
speed and course made good, gyros, larger of port or starboard ws and
accompanying wind azimuth. Outputs are year day, lat lon, speed and
course made good, gyro, relative ws and direction, true ws and
direction, air temp, relative humidity, barometric pressure, short- and
long-wave radiation,5m and 1m sea surface temps, Edo depth, Chirp sonar
depth, Edo speed, Edo indicator.
<li>Check plots of true wind speed and direction to make sure they look
ok.
<li>Run vector averaging program which produces 60 minute series. The
program uses 60 consecutive records and does not check for missing
records. I have not carried depths since hourly averages do not seem
useful nor Edo speeds since they seem pretty generally useless. Output
parameters are: Year day, lat, long, true wind speed and direction, air
temp, relative humidity, barometric pressure, short- and long-wave
radiation, sea surface temp @ 5m & 1m.
</li></ol>
<pre>
Edo depth error correction: replace bad value with previous value.
EN320 - Excellent data but no useful Edo depths.
Cruise Exp Spds Dirs AT RH BP SST SWR Prec SSC SSAL
EN320 GLOBEC --- --- --- --- --- --- --- --- --- ---
</pre>
from Cruise: EN321 <ol>
<li>Concatenate daily 1 minute files into one file for whole cruise
<li>Edit file for obvious bad data, i.e., missing data, garbage
characters, etc.
<li>Run program which reformats data. Output parameters:<br>
Year day, lat, long, Speed made good, course made good, gyro 1 & 2,
Edo speed, Edo indicator, port wind speed, starboard ws, port wind
azimuth, starboard waz, air temp, relative humidity, barometric
pressure, sea surface temp @5m & 1m depth, Edo depth, Chirp sonar depth.
<li>Put plots of all parameters on screen and look for obvious single bad
points. Edit in basic concatenated file. Except I have not edited
depths.
<li>Iterate steps 2-4 until no more obvious bad points.
<li>Run second program which computes true wind speed and direction from
speed and course made good, gyros, larger of port or starboard ws and
accompanying wind azimuth. Outputs are year day, lat lon, speed and
course made good, gyro, relative ws and direction, true ws and
direction, air temp, relative humidity, barometric pressure, short- and
long-wave radiation,5m and 1m sea surface temps, Edo depth, Chirp sonar
depth, Edo speed, Edo indicator.
<li>Check plots of true wind speed and direction to make sure they look
ok.
<li>Run vector averaging program which produces 60 minute series. The
program uses 60 consecutive records and does not check for missing
records. I have not carried depths since hourly averages do not seem
useful nor Edo speeds since they seem pretty generally useless. Output
parameters are: Year day, lat, long, true wind speed and direction, air
temp, relative humidity, barometric pressure, short- and long-wave
radiation, sea surface temp @ 5m & 1m.
</li></ol>
<pre>
Edo depth error correction: replace bad value with previous value.
EN321 - Excellent data but no useful Edo depths. 50 records had $HEHDT
in the Edo depth field. Many records had missing gyro 2.
Processed with only gyro 1.
Cruise Exp Spds Dirs AT RH BP SST SWR Prec SSC SSAL
EN321 GLOBEC --- --- --- --- --- --- --- --- --- ---
</pre>
from Cruise: EN322 <ol>
<li>Concatenate daily 1 minute files into one file for whole cruise
<li>Edit file for obvious bad data, i.e., missing data, garbage
characters, etc.
<li>Run program which reformats data. Output parameters:<br>
Year day, lat, long, Speed made good, course made good, gyro 1 & 2,
Edo speed, Edo indicator, port wind speed, starboard ws, port wind
azimuth, starboard waz, air temp, relative humidity, barometric
pressure, sea surface temp @5m & 1m depth, Edo depth, Chirp sonar depth.
<li>Put plots of all parameters on screen and look for obvious single bad
points. Edit in basic concatenated file. Except I have not edited
depths.
<li>Iterate steps 2-4 until no more obvious bad points.
<li>Run second program which computes true wind speed and direction from
speed and course made good, gyros, larger of port or starboard ws and
accompanying wind azimuth. Outputs are year day, lat lon, speed and
course made good, gyro, relative ws and direction, true ws and
direction, air temp, relative humidity, barometric pressure, short- and
long-wave radiation,5m and 1m sea surface temps, Edo depth, Chirp sonar
depth, Edo speed, Edo indicator.
<li>Check plots of true wind speed and direction to make sure they look
ok.
<li>Run vector averaging program which produces 60 minute series. The
program uses 60 consecutive records and does not check for missing
records. I have not carried depths since hourly averages do not seem
useful nor Edo speeds since they seem pretty generally useless. Output
parameters are: Year day, lat, long, true wind speed and direction, air
temp, relative humidity, barometric pressure, short- and long-wave
radiation, sea surface temp @ 5m & 1m.
</li></ol>
<pre>
Edo depth error correction: replace bad value with previous value.
EN322 - Good data. Air temp noisy. Edo depth has useful data but not edited.
Cruise Exp Spds Dirs AT RH BP SST SWR Prec SSC SSAL
EN322 GLOBEC --- --- --- --- --- --- --- --- --- ---
</pre>
from Cruise: EN323 <ol>
<li>Concatenate daily 1 minute files into one file for whole cruise
<li>Edit file for obvious bad data, i.e., missing data, garbage
characters, etc.
<li>Run program which reformats data. Output parameters:<br>
Year day, lat, long, Speed made good, course made good, gyro 1 & 2,
Edo speed, Edo indicator, port wind speed, starboard ws, port wind
azimuth, starboard waz, air temp, relative humidity, barometric
pressure, sea surface temp @5m & 1m depth, Edo depth, Chirp sonar depth.
<li>Put plots of all parameters on screen and look for obvious single bad
points. Edit in basic concatenated file. Except I have not edited
depths.
<li>Iterate steps 2-4 until no more obvious bad points.
<li>Run second program which computes true wind speed and direction from
speed and course made good, gyros, larger of port or starboard ws and
accompanying wind azimuth. Outputs are year day, lat lon, speed and
course made good, gyro, relative ws and direction, true ws and
direction, air temp, relative humidity, barometric pressure, short- and
long-wave radiation,5m and 1m sea surface temps, Edo depth, Chirp sonar
depth, Edo speed, Edo indicator.
<li>Check plots of true wind speed and direction to make sure they look
ok.
<li>Run vector averaging program which produces 60 minute series. The
program uses 60 consecutive records and does not check for missing
records. I have not carried depths since hourly averages do not seem
useful nor Edo speeds since they seem pretty generally useless. Output
parameters are: Year day, lat, long, true wind speed and direction, air
temp, relative humidity, barometric pressure, short- and long-wave
radiation, sea surface temp @ 5m & 1m.
</li></ol>
<pre>
Edo depth error correction: replace bad value with previous value.
EN323 - Good data. Air temp noisy. The noise has been traced to stack
gases passing over the RH and AT sensors as the ship turns. This
causes the AT to be momentarily anomalously high and the RH low.
Edo depth not useful.
EN323 GLOBEC --- --- --- --- --- --- --- --- --- ---
</pre>
from Cruise: EN324 <ol>
<li>Concatenate daily 1 minute files into one file for whole cruise
<li>Edit file for obvious bad data, i.e., missing data, garbage
characters, etc.
<li>Run program which reformats data. Output parameters:<br>
Year day, lat, long, Speed made good, course made good, gyro 1 & 2,
Edo speed, Edo indicator, port wind speed, starboard ws, port wind
azimuth, starboard waz, air temp, relative humidity, barometric
pressure, sea surface temp @5m & 1m depth, Edo depth, Chirp sonar depth.
<li>Put plots of all parameters on screen and look for obvious single bad
points. Edit in basic concatenated file. Except I have not edited
depths.
<li>Iterate steps 2-4 until no more obvious bad points.
<li>Run second program which computes true wind speed and direction from
speed and course made good, gyros, larger of port or starboard ws and
accompanying wind azimuth. Outputs are year day, lat lon, speed and
course made good, gyro, relative ws and direction, true ws and
direction, air temp, relative humidity, barometric pressure, short- and
long-wave radiation,5m and 1m sea surface temps, Edo depth, Chirp sonar
depth, Edo speed, Edo indicator.
<li>Check plots of true wind speed and direction to make sure they look
ok.
<li>Run vector averaging program which produces 60 minute series. The
program uses 60 consecutive records and does not check for missing
records. I have not carried depths since hourly averages do not seem
useful nor Edo speeds since they seem pretty generally useless. Output
parameters are: Year day, lat, long, true wind speed and direction, air
temp, relative humidity, barometric pressure, short- and long-wave
radiation, sea surface temp @ 5m & 1m.
</li></ol>
<pre>
Edo depth error correction: replace bad value with previous value.
EN324 - Combined with EN323 by Endeavor personnel.
Cruise Exp Spds Dirs AT RH BP SST SWR Prec SSC SSAL
EN324 GLOBEC --- --- --- --- --- --- --- --- --- ---
</pre>
from Cruise: EN325 <ol>
<li>Concatenate daily 1 minute files into one file for whole cruise
<li>Edit file for obvious bad data, i.e., missing data, garbage
characters, etc.
<li>Run program which reformats data. Output parameters:<br>
Year day, lat, long, Speed made good, course made good, gyro 1 & 2,
Edo speed, Edo indicator, port wind speed, starboard ws, port wind
azimuth, starboard waz, air temp, relative humidity, barometric
pressure, sea surface temp @5m & 1m depth, Edo depth, Chirp sonar depth.
<li>Put plots of all parameters on screen and look for obvious single bad
points. Edit in basic concatenated file. Except I have not edited
depths.
<li>Iterate steps 2-4 until no more obvious bad points.
<li>Run second program which computes true wind speed and direction from
speed and course made good, gyros, larger of port or starboard ws and
accompanying wind azimuth. Outputs are year day, lat lon, speed and
course made good, gyro, relative ws and direction, true ws and
direction, air temp, relative humidity, barometric pressure, short- and
long-wave radiation,5m and 1m sea surface temps, Edo depth, Chirp sonar
depth, Edo speed, Edo indicator.
<li>Check plots of true wind speed and direction to make sure they look
ok.
<li>Run vector averaging program which produces 60 minute series. The
program uses 60 consecutive records and does not check for missing
records. I have not carried depths since hourly averages do not seem
useful nor Edo speeds since they seem pretty generally useless. Output
parameters are: Year day, lat, long, true wind speed and direction, air
temp, relative humidity, barometric pressure, short- and long-wave
radiation, sea surface temp @ 5m & 1m.
</li></ol>
<pre>
Edo depth error correction: replace bad value with previous value.
EN325 - Very clean data. RH goes up to 108 %RH. No Edo depths. GPS data from
Trimble NAVTRAK, no Trimble TASMON data.
Cruise Exp Spds Dirs AT RH BP SST SWR Prec SSC SSAL
EN325 GLOBEC --- --- --- --- --- --- --- --- --- ---
</pre>
from Cruise: EN330 <ol>
<li>Concatenate daily 1 minute files into one file for whole cruise
<li>Edit file for obvious bad data, i.e., missing data, garbage
characters, etc.
<li>Run program which reformats data. Output parameters:<br>
Year day, lat, long, Speed made good, course made good, gyro 1 & 2,
Edo speed, Edo indicator, port wind speed, starboard ws, port wind
azimuth, starboard waz, air temp, relative humidity, barometric
pressure, sea surface temp @5m & 1m depth, Edo depth, Chirp sonar depth.
<li>Put plots of all parameters on screen and look for obvious single bad
points. Edit in basic concatenated file. Except I have not edited
depths.
<li>Iterate steps 2-4 until no more obvious bad points.
<li>Run second program which computes true wind speed and direction from
speed and course made good, gyros, larger of port or starboard ws and
accompanying wind azimuth. Outputs are year day, lat lon, speed and
course made good, gyro, relative ws and direction, true ws and
direction, air temp, relative humidity, barometric pressure, short- and
long-wave radiation,5m and 1m sea surface temps, Edo depth, Chirp sonar
depth, Edo speed, Edo indicator.
<li>Check plots of true wind speed and direction to make sure they look
ok.
<li>Run vector averaging program which produces 60 minute series. The
program uses 60 consecutive records and does not check for missing
records. I have not carried depths since hourly averages do not seem
useful nor Edo speeds since they seem pretty generally useless. Output
parameters are: Year day, lat, long, true wind speed and direction, air
temp, relative humidity, barometric pressure, short- and long-wave
radiation, sea surface temp @ 5m & 1m.
</li></ol>
<pre>
Edo depth error correction: replace bad value with previous value.
Cruise Exp Spds Dirs AT RH BP SST SWR Prec SSC SSAL
EN330 GLOBEC --- --- --- --- --- --- --- --- --- ---
</pre>
from Cruise: EN331 <ol>
<li>Concatenate daily 1 minute files into one file for whole cruise
<li>Edit file for obvious bad data, i.e., missing data, garbage
characters, etc.
<li>Run program which reformats data. Output parameters:<br>
Year day, lat, long, Speed made good, course made good, gyro 1 & 2,
Edo speed, Edo indicator, port wind speed, starboard ws, port wind
azimuth, starboard waz, air temp, relative humidity, barometric
pressure, sea surface temp @5m & 1m depth, Edo depth, Chirp sonar depth.
<li>Put plots of all parameters on screen and look for obvious single bad
points. Edit in basic concatenated file. Except I have not edited
depths.
<li>Iterate steps 2-4 until no more obvious bad points.
<li>Run second program which computes true wind speed and direction from
speed and course made good, gyros, larger of port or starboard ws and
accompanying wind azimuth. Outputs are year day, lat lon, speed and
course made good, gyro, relative ws and direction, true ws and
direction, air temp, relative humidity, barometric pressure, short- and
long-wave radiation,5m and 1m sea surface temps, Edo depth, Chirp sonar
depth, Edo speed, Edo indicator.
<li>Check plots of true wind speed and direction to make sure they look
ok.
<li>Run vector averaging program which produces 60 minute series. The
program uses 60 consecutive records and does not check for missing
records. I have not carried depths since hourly averages do not seem
useful nor Edo speeds since they seem pretty generally useless. Output
parameters are: Year day, lat, long, true wind speed and direction, air
temp, relative humidity, barometric pressure, short- and long-wave
radiation, sea surface temp @ 5m & 1m.
</li></ol>
<pre>
Edo depth error correction: replace bad value with previous value.
Cruise Exp Spds Dirs AT RH BP SST SWR Prec SSC SSAL
EN331 GLOBEC --- --- --- --- --- --- --- --- --- ---
</pre>
from Cruise: OC336 <ol>
<li>Concatenate daily 1 minute files into one file for whole cruise
<li>Edit file for obvious bad data, i.e., missing data, garbage
characters, etc.
<li>Run program which reformats data. Output parameters:<br>
Year day, lat, long, Speed made good, course made good, gyro 1 & 2,
Edo speed, Edo indicator, port wind speed, starboard ws, port wind
azimuth, starboard waz, air temp, relative humidity, barometric
pressure, sea surface temp @5m & 1m depth, Edo depth, Chirp sonar depth.
<li>Put plots of all parameters on screen and look for obvious single bad
points. Edit in basic concatenated file. Except I have not edited
depths.
<li>Iterate steps 2-4 until no more obvious bad points.
<li>Run second program which computes true wind speed and direction from
speed and course made good, gyros, larger of port or starboard ws and
accompanying wind azimuth. Outputs are year day, lat lon, speed and
course made good, gyro, relative ws and direction, true ws and
direction, air temp, relative humidity, barometric pressure, short- and
long-wave radiation,5m and 1m sea surface temps, Edo depth, Chirp sonar
depth, Edo speed, Edo indicator.
<li>Check plots of true wind speed and direction to make sure they look
ok.
<li>Run vector averaging program which produces 60 minute series. The
program uses 60 consecutive records and does not check for missing
records. I have not carried depths since hourly averages do not seem
useful nor Edo speeds since they seem pretty generally useless. Output
parameters are: Year day, lat, long, true wind speed and direction, air
temp, relative humidity, barometric pressure, short- and long-wave
radiation, sea surface temp @ 5m & 1m.
</li></ol>
<pre>
Edo depth error correction: replace bad value with previous value.
Cruise Exp Spds Dirs AT RH BP SST SWR Prec SSC SSAL
OC336 GLOBEC Good Good Good Good Good Good Good Good Noisy Noisy
</pre>
from Cruise: OC338 <ol>
<li>Concatenate daily 1 minute files into one file for whole cruise
<li>Edit file for obvious bad data, i.e., missing data, garbage
characters, etc.
<li>Run program which reformats data. Output parameters:<br>
Year day, lat, long, Speed made good, course made good, gyro 1 & 2,
Edo speed, Edo indicator, port wind speed, starboard ws, port wind
azimuth, starboard waz, air temp, relative humidity, barometric
pressure, sea surface temp @5m & 1m depth, Edo depth, Chirp sonar depth.
<li>Put plots of all parameters on screen and look for obvious single bad
points. Edit in basic concatenated file. Except I have not edited
depths.
<li>Iterate steps 2-4 until no more obvious bad points.
<li>Run second program which computes true wind speed and direction from
speed and course made good, gyros, larger of port or starboard ws and
accompanying wind azimuth. Outputs are year day, lat lon, speed and
course made good, gyro, relative ws and direction, true ws and
direction, air temp, relative humidity, barometric pressure, short- and
long-wave radiation,5m and 1m sea surface temps, Edo depth, Chirp sonar
depth, Edo speed, Edo indicator.
<li>Check plots of true wind speed and direction to make sure they look
ok.
<li>Run vector averaging program which produces 60 minute series. The
program uses 60 consecutive records and does not check for missing
records. I have not carried depths since hourly averages do not seem
useful nor Edo speeds since they seem pretty generally useless. Output
parameters are: Year day, lat, long, true wind speed and direction, air
temp, relative humidity, barometric pressure, short- and long-wave
radiation, sea surface temp @ 5m & 1m.
</li></ol>
<pre>
Edo depth error correction: replace bad value with previous value.
Cruise Exp Spds Dirs AT RH BP SST SWR Prec SSC SSAL
OC338 GLOBEC Good Good Good Good Good Good Good Good Noisy Noisy
</pre>
from Cruise: OC339 <ol>
<li>Concatenate daily 1 minute files into one file for whole cruise
<li>Edit file for obvious bad data, i.e., missing data, garbage
characters, etc.
<li>Run program which reformats data. Output parameters:<br>
Year day, lat, long, Speed made good, course made good, gyro 1 & 2,
Edo speed, Edo indicator, port wind speed, starboard ws, port wind
azimuth, starboard waz, air temp, relative humidity, barometric
pressure, sea surface temp @5m & 1m depth, Edo depth, Chirp sonar depth.
<li>Put plots of all parameters on screen and look for obvious single bad
points. Edit in basic concatenated file. Except I have not edited
depths.
<li>Iterate steps 2-4 until no more obvious bad points.
<li>Run second program which computes true wind speed and direction from
speed and course made good, gyros, larger of port or starboard ws and
accompanying wind azimuth. Outputs are year day, lat lon, speed and
course made good, gyro, relative ws and direction, true ws and
direction, air temp, relative humidity, barometric pressure, short- and
long-wave radiation,5m and 1m sea surface temps, Edo depth, Chirp sonar
depth, Edo speed, Edo indicator.
<li>Check plots of true wind speed and direction to make sure they look
ok.
<li>Run vector averaging program which produces 60 minute series. The
program uses 60 consecutive records and does not check for missing
records. I have not carried depths since hourly averages do not seem
useful nor Edo speeds since they seem pretty generally useless. Output
parameters are: Year day, lat, long, true wind speed and direction, air
temp, relative humidity, barometric pressure, short- and long-wave
radiation, sea surface temp @ 5m & 1m.
</li></ol>
<pre>
Edo depth error correction: replace bad value with previous value.
Cruise Exp Spds Dirs AT RH BP SST SWR Prec SSC SSAL
OC339 GLOBEC Good Good Good Good Good Good Good Good Noisy Noisy
</pre>
from Cruise: OC340 <ol>
<li>Concatenate daily 1 minute files into one file for whole cruise
<li>Edit file for obvious bad data, i.e., missing data, garbage
characters, etc.
<li>Run program which reformats data. Output parameters:<br>
Year day, lat, long, Speed made good, course made good, gyro 1 & 2,
Edo speed, Edo indicator, port wind speed, starboard ws, port wind
azimuth, starboard waz, air temp, relative humidity, barometric
pressure, sea surface temp @5m & 1m depth, Edo depth, Chirp sonar depth.
<li>Put plots of all parameters on screen and look for obvious single bad
points. Edit in basic concatenated file. Except I have not edited
depths.
<li>Iterate steps 2-4 until no more obvious bad points.
<li>Run second program which computes true wind speed and direction from
speed and course made good, gyros, larger of port or starboard ws and
accompanying wind azimuth. Outputs are year day, lat lon, speed and
course made good, gyro, relative ws and direction, true ws and
direction, air temp, relative humidity, barometric pressure, short- and
long-wave radiation,5m and 1m sea surface temps, Edo depth, Chirp sonar
depth, Edo speed, Edo indicator.
<li>Check plots of true wind speed and direction to make sure they look
ok.
<li>Run vector averaging program which produces 60 minute series. The
program uses 60 consecutive records and does not check for missing
records. I have not carried depths since hourly averages do not seem
useful nor Edo speeds since they seem pretty generally useless. Output
parameters are: Year day, lat, long, true wind speed and direction, air
temp, relative humidity, barometric pressure, short- and long-wave
radiation, sea surface temp @ 5m & 1m.
</li></ol>
<pre>
Edo depth error correction: replace bad value with previous value.
Cruise Exp Spds Dirs AT RH BP SST SWR Prec SSC SSAL
OC340 GLOBEC Good Good Good Good Good Good Good Good Noisy Noisy
</pre>
from Cruise: OC341 <ol>
<li>Concatenate daily 1 minute files into one file for whole cruise
<li>Edit file for obvious bad data, i.e., missing data, garbage
characters, etc.
<li>Run program which reformats data. Output parameters:<br>
Year day, lat, long, Speed made good, course made good, gyro 1 & 2,
Edo speed, Edo indicator, port wind speed, starboard ws, port wind
azimuth, starboard waz, air temp, relative humidity, barometric
pressure, sea surface temp @5m & 1m depth, Edo depth, Chirp sonar depth.
<li>Put plots of all parameters on screen and look for obvious single bad
points. Edit in basic concatenated file. Except I have not edited
depths.
<li>Iterate steps 2-4 until no more obvious bad points.
<li>Run second program which computes true wind speed and direction from
speed and course made good, gyros, larger of port or starboard ws and
accompanying wind azimuth. Outputs are year day, lat lon, speed and
course made good, gyro, relative ws and direction, true ws and
direction, air temp, relative humidity, barometric pressure, short- and
long-wave radiation,5m and 1m sea surface temps, Edo depth, Chirp sonar
depth, Edo speed, Edo indicator.
<li>Check plots of true wind speed and direction to make sure they look
ok.
<li>Run vector averaging program which produces 60 minute series. The
program uses 60 consecutive records and does not check for missing
records. I have not carried depths since hourly averages do not seem
useful nor Edo speeds since they seem pretty generally useless. Output
parameters are: Year day, lat, long, true wind speed and direction, air
temp, relative humidity, barometric pressure, short- and long-wave
radiation, sea surface temp @ 5m & 1m.
</li></ol>
<pre>
Edo depth error correction: replace bad value with previous value.
OC341 - Anemometer died after 2 days.
Cruise Exp Spds Dirs AT RH BP SST SWR Prec SSC SSAL
OC341 GLOBEC --- --- Good Good Good Good Good Good Noisy Noisy
</pre>
from Cruise: OC342 <ol>
<li>Concatenate daily 1 minute files into one file for whole cruise
<li>Edit file for obvious bad data, i.e., missing data, garbage
characters, etc.
<li>Run program which reformats data. Output parameters:<br>
Year day, lat, long, Speed made good, course made good, gyro 1 & 2,
Edo speed, Edo indicator, port wind speed, starboard ws, port wind
azimuth, starboard waz, air temp, relative humidity, barometric
pressure, sea surface temp @5m & 1m depth, Edo depth, Chirp sonar depth.
<li>Put plots of all parameters on screen and look for obvious single bad
points. Edit in basic concatenated file. Except I have not edited
depths.
<li>Iterate steps 2-4 until no more obvious bad points.
<li>Run second program which computes true wind speed and direction from
speed and course made good, gyros, larger of port or starboard ws and
accompanying wind azimuth. Outputs are year day, lat lon, speed and
course made good, gyro, relative ws and direction, true ws and
direction, air temp, relative humidity, barometric pressure, short- and
long-wave radiation,5m and 1m sea surface temps, Edo depth, Chirp sonar
depth, Edo speed, Edo indicator.
<li>Check plots of true wind speed and direction to make sure they look
ok.
<li>Run vector averaging program which produces 60 minute series. The
program uses 60 consecutive records and does not check for missing
records. I have not carried depths since hourly averages do not seem
useful nor Edo speeds since they seem pretty generally useless. Output
parameters are: Year day, lat, long, true wind speed and direction, air
temp, relative humidity, barometric pressure, short- and long-wave
radiation, sea surface temp @ 5m & 1m.
</li></ol>
<pre>
Edo depth error correction: replace bad value with previous value.
Cruise Exp Spds Dirs AT RH BP SST SWR Prec SSC SSAL
OC342 GLOBEC Good Good Good Good Good Noisy Good Good Noisy Noisy
</pre>
from Cruise: OC343 <ol>
<li>Concatenate daily 1 minute files into one file for whole cruise
<li>Edit file for obvious bad data, i.e., missing data, garbage
characters, etc.
<li>Run program which reformats data. Output parameters:<br>
Year day, lat, long, Speed made good, course made good, gyro 1 & 2,
Edo speed, Edo indicator, port wind speed, starboard ws, port wind
azimuth, starboard waz, air temp, relative humidity, barometric
pressure, sea surface temp @5m & 1m depth, Edo depth, Chirp sonar depth.
<li>Put plots of all parameters on screen and look for obvious single bad
points. Edit in basic concatenated file. Except I have not edited
depths.
<li>Iterate steps 2-4 until no more obvious bad points.
<li>Run second program which computes true wind speed and direction from
speed and course made good, gyros, larger of port or starboard ws and
accompanying wind azimuth. Outputs are year day, lat lon, speed and
course made good, gyro, relative ws and direction, true ws and
direction, air temp, relative humidity, barometric pressure, short- and
long-wave radiation,5m and 1m sea surface temps, Edo depth, Chirp sonar
depth, Edo speed, Edo indicator.
<li>Check plots of true wind speed and direction to make sure they look
ok.
<li>Run vector averaging program which produces 60 minute series. The
program uses 60 consecutive records and does not check for missing
records. I have not carried depths since hourly averages do not seem
useful nor Edo speeds since they seem pretty generally useless. Output
parameters are: Year day, lat, long, true wind speed and direction, air
temp, relative humidity, barometric pressure, short- and long-wave
radiation, sea surface temp @ 5m & 1m.
</li></ol>
<pre>
Edo depth error correction: replace bad value with previous value.
Cruise Exp Spds Dirs AT RH BP SST SWR Prec SSC SSAL
OC343 GLOBEC Good Good Good Bad Good Good Good Good Good Good
</pre>
from Cruise: OC344 <ol>
<li>Concatenate daily 1 minute files into one file for whole cruise
<li>Edit file for obvious bad data, i.e., missing data, garbage
characters, etc.
<li>Run program which reformats data. Output parameters:<br>
Year day, lat, long, Speed made good, course made good, gyro 1 & 2,
Edo speed, Edo indicator, port wind speed, starboard ws, port wind
azimuth, starboard waz, air temp, relative humidity, barometric
pressure, sea surface temp @5m & 1m depth, Edo depth, Chirp sonar depth.
<li>Put plots of all parameters on screen and look for obvious single bad
points. Edit in basic concatenated file. Except I have not edited
depths.
<li>Iterate steps 2-4 until no more obvious bad points.
<li>Run second program which computes true wind speed and direction from
speed and course made good, gyros, larger of port or starboard ws and
accompanying wind azimuth. Outputs are year day, lat lon, speed and
course made good, gyro, relative ws and direction, true ws and
direction, air temp, relative humidity, barometric pressure, short- and
long-wave radiation,5m and 1m sea surface temps, Edo depth, Chirp sonar
depth, Edo speed, Edo indicator.
<li>Check plots of true wind speed and direction to make sure they look
ok.
<li>Run vector averaging program which produces 60 minute series. The
program uses 60 consecutive records and does not check for missing
records. I have not carried depths since hourly averages do not seem
useful nor Edo speeds since they seem pretty generally useless. Output
parameters are: Year day, lat, long, true wind speed and direction, air
temp, relative humidity, barometric pressure, short- and long-wave
radiation, sea surface temp @ 5m & 1m.
</li></ol>
<pre>
Edo depth error correction: replace bad value with previous value.
OC344 - Bad spot in SSCOND & SSAL on day 191
Cruise Exp Spds Dirs AT RH BP SST SWR Prec SSC SSAL
OC344 GLOBEC Good Good Good Bad Good Good Good Good Good Good
</pre>
from Cruise: OC345 <ol>
<li>Concatenate daily 1 minute files into one file for whole cruise
<li>Edit file for obvious bad data, i.e., missing data, garbage
characters, etc.
<li>Run program which reformats data. Output parameters:<br>
Year day, lat, long, Speed made good, course made good, gyro 1 & 2,
Edo speed, Edo indicator, port wind speed, starboard ws, port wind
azimuth, starboard waz, air temp, relative humidity, barometric
pressure, sea surface temp @5m & 1m depth, Edo depth, Chirp sonar depth.
<li>Put plots of all parameters on screen and look for obvious single bad
points. Edit in basic concatenated file. Except I have not edited
depths.
<li>Iterate steps 2-4 until no more obvious bad points.
<li>Run second program which computes true wind speed and direction from
speed and course made good, gyros, larger of port or starboard ws and
accompanying wind azimuth. Outputs are year day, lat lon, speed and
course made good, gyro, relative ws and direction, true ws and
direction, air temp, relative humidity, barometric pressure, short- and
long-wave radiation,5m and 1m sea surface temps, Edo depth, Chirp sonar
depth, Edo speed, Edo indicator.
<li>Check plots of true wind speed and direction to make sure they look
ok.
<li>Run vector averaging program which produces 60 minute series. The
program uses 60 consecutive records and does not check for missing
records. I have not carried depths since hourly averages do not seem
useful nor Edo speeds since they seem pretty generally useless. Output
parameters are: Year day, lat, long, true wind speed and direction, air
temp, relative humidity, barometric pressure, short- and long-wave
radiation, sea surface temp @ 5m & 1m.
</li></ol>
<pre>
Edo depth error correction: replace bad value with previous value.
Cruise Exp Spds Dirs AT RH BP SST SWR Prec SSC SSAL
OC345 GLOBEC Good Good Good Good Good Good Good Good Good Good
</pre>
from Cruise: OC346 <ol>
<li>Concatenate daily 1 minute files into one file for whole cruise
<li>Edit file for obvious bad data, i.e., missing data, garbage
characters, etc.
<li>Run program which reformats data. Output parameters:<br>
Year day, lat, long, Speed made good, course made good, gyro 1 & 2,
Edo speed, Edo indicator, port wind speed, starboard ws, port wind
azimuth, starboard waz, air temp, relative humidity, barometric
pressure, sea surface temp @5m & 1m depth, Edo depth, Chirp sonar depth.
<li>Put plots of all parameters on screen and look for obvious single bad
points. Edit in basic concatenated file. Except I have not edited
depths.
<li>Iterate steps 2-4 until no more obvious bad points.
<li>Run second program which computes true wind speed and direction from
speed and course made good, gyros, larger of port or starboard ws and
accompanying wind azimuth. Outputs are year day, lat lon, speed and
course made good, gyro, relative ws and direction, true ws and
direction, air temp, relative humidity, barometric pressure, short- and
long-wave radiation,5m and 1m sea surface temps, Edo depth, Chirp sonar
depth, Edo speed, Edo indicator.
<li>Check plots of true wind speed and direction to make sure they look
ok.
<li>Run vector averaging program which produces 60 minute series. The
program uses 60 consecutive records and does not check for missing
records. I have not carried depths since hourly averages do not seem
useful nor Edo speeds since they seem pretty generally useless. Output
parameters are: Year day, lat, long, true wind speed and direction, air
temp, relative humidity, barometric pressure, short- and long-wave
radiation, sea surface temp @ 5m & 1m.
</li></ol>
<pre>
Edo depth error correction: replace bad value with previous value.
OC346 - Gap from 228.73-229.00
Cruise Exp Spds Dirs AT RH BP SST SWR Prec SSC SSAL
OC346 GLOBEC Good Good Good Good Good Good Good Good Good Good
</pre>
from Cruise: OC347 <ol>
<li>Concatenate daily 1 minute files into one file for whole cruise
<li>Edit file for obvious bad data, i.e., missing data, garbage
characters, etc.
<li>Run program which reformats data. Output parameters:<br>
Year day, lat, long, Speed made good, course made good, gyro 1 & 2,
Edo speed, Edo indicator, port wind speed, starboard ws, port wind
azimuth, starboard waz, air temp, relative humidity, barometric
pressure, sea surface temp @5m & 1m depth, Edo depth, Chirp sonar depth.
<li>Put plots of all parameters on screen and look for obvious single bad
points. Edit in basic concatenated file. Except I have not edited
depths.
<li>Iterate steps 2-4 until no more obvious bad points.
<li>Run second program which computes true wind speed and direction from
speed and course made good, gyros, larger of port or starboard ws and
accompanying wind azimuth. Outputs are year day, lat lon, speed and
course made good, gyro, relative ws and direction, true ws and
direction, air temp, relative humidity, barometric pressure, short- and
long-wave radiation,5m and 1m sea surface temps, Edo depth, Chirp sonar
depth, Edo speed, Edo indicator.
<li>Check plots of true wind speed and direction to make sure they look
ok.
<li>Run vector averaging program which produces 60 minute series. The
program uses 60 consecutive records and does not check for missing
records. I have not carried depths since hourly averages do not seem
useful nor Edo speeds since they seem pretty generally useless. Output
parameters are: Year day, lat, long, true wind speed and direction, air
temp, relative humidity, barometric pressure, short- and long-wave
radiation, sea surface temp @ 5m & 1m.
</li></ol>
<pre>
Edo depth error correction: replace bad value with previous value.
Cruise Exp Spds Dirs AT RH BP SST SWR Prec SSC SSAL
OC347 GLOBEC Good Good Good Good Good Good Good Good Good Good
</pre>
Specified by the Principal Investigator(s)
asNeeded
7.x-1.1
Biological and Chemical Oceanography Data Management Office (BCO-DMO)
Unavailable
508-289-2009
WHOI MS#36
Woods Hole
MA
02543
USA
info@bco-dmo.org
http://www.bco-dmo.org
Monday - Friday 8:00am - 5:00pm
For questions regarding this resource, please contact BCO-DMO via the email address provided.
pointOfContact
Thermosalinograph
Thermosalinograph
PI Supplied Instrument Name: Thermosalinograph PI Supplied Instrument Description:Thermosalinograph used to obtain a continuous record of sea surface temperature and salinity. Instrument Name: Thermosalinograph Instrument Short Name:TSG Instrument Description: A thermosalinograph (TSG) is used to obtain a continuous record of sea surface temperature and salinity. On many research vessels the TSG is integrated into the ship's underway seawater sampling system and reported with the underway or alongtrack data. Community Standard Description: http://vocab.nerc.ac.uk/collection/L05/current/133/
Cruise: EN319
EN319
R/V Endeavor
Community Standard Description
International Council for the Exploration of the Sea
R/V Endeavor
vessel
EN319
Dr Edward Durbin
University of Rhode Island
http://globec.whoi.edu/globec-dir/reports/en319/en319rept.html
Report describing EN319
Cruise: EN320
EN320
R/V Endeavor
Community Standard Description
International Council for the Exploration of the Sea
R/V Endeavor
vessel
EN320
Ann Bucklin
University of New Hampshire
http://globec.whoi.edu/globec-dir/reports/en320new/en320mda.htm
Report describing EN320
Cruise: EN321
EN321
R/V Endeavor
Community Standard Description
International Council for the Exploration of the Sea
R/V Endeavor
vessel
EN321
Dian J. Gifford
University of Rhode Island
Cruise: EN322
EN322
R/V Endeavor
Community Standard Description
International Council for the Exploration of the Sea
R/V Endeavor
vessel
EN322
Dr Edward Durbin
University of Rhode Island
Cruise: EN323
EN323
R/V Endeavor
Community Standard Description
International Council for the Exploration of the Sea
R/V Endeavor
vessel
EN323
James R. Ledwell
Woods Hole Oceanographic Institution
http://globec.whoi.edu/globec-dir/reports/en323/globecnew.html
Report describing EN323
Cruise: EN324
EN324
R/V Endeavor
Community Standard Description
International Council for the Exploration of the Sea
R/V Endeavor
vessel
EN324
James R. Ledwell
Woods Hole Oceanographic Institution
http://globec.whoi.edu/globec-dir/reports/en323/globecnew.html
Report describing EN324
Cruise: EN325
EN325
R/V Endeavor
Community Standard Description
International Council for the Exploration of the Sea
R/V Endeavor
vessel
EN325
Dian J. Gifford
University of Rhode Island
Cruise: EN330
EN330
R/V Endeavor
Community Standard Description
International Council for the Exploration of the Sea
R/V Endeavor
vessel
EN330
Dr Charles H Greene
Cornell University
http://globec.whoi.edu/globec-dir/reports/en330/en330new.htm
Report describing EN330
Cruise: EN331
EN331
R/V Endeavor
Community Standard Description
International Council for the Exploration of the Sea
R/V Endeavor
vessel
EN331
Dr Charles H Greene
Cornell University
http://globec.whoi.edu/globec-dir/reports/en331/en331rpt.6sept2000.html
Report describing EN331
Cruise: OC336
OC336
R/V Oceanus
Community Standard Description
International Council for the Exploration of the Sea
R/V Oceanus
vessel
OC336
Ms Maureen Taylor
Northeast Fisheries Science Center - Woods Hole
http://globec.whoi.edu/globec-dir/reports/oc336/oc336cruise-report.html
Report describing OC336
Cruise: OC338
OC338
R/V Oceanus
Community Standard Description
International Council for the Exploration of the Sea
R/V Oceanus
vessel
OC338
Jim Irish
Woods Hole Oceanographic Institution
http://globec.whoi.edu/globec-dir/reports/oc338/OC338.pdf
Report describing OC338
Cruise: OC339
OC339
R/V Oceanus
Community Standard Description
International Council for the Exploration of the Sea
R/V Oceanus
vessel
OC339
Dr Ronald Schlitz
Northeast Fisheries Science Center - Woods Hole
http://globec.whoi.edu/globec-dir/reports/oc339/OC339.htm
Report describing OC339
Cruise: OC340
OC340
R/V Oceanus
Community Standard Description
International Council for the Exploration of the Sea
R/V Oceanus
vessel
OC340
Dave Hebert
University of Rhode Island
http://globec.whoi.edu/globec-dir/reports/oc340/oc340rpt.html
Report describing OC340
Cruise: OC341
OC341
R/V Oceanus
Community Standard Description
International Council for the Exploration of the Sea
R/V Oceanus
vessel
OC341
Dr Charles B. Miller
Oregon State University
http://globec.whoi.edu/globec-dir/reports/oc341/reptoc341.html
Report describing OC341
Cruise: OC342
OC342
R/V Oceanus
Community Standard Description
International Council for the Exploration of the Sea
R/V Oceanus
vessel
OC342
Robert W. Houghton
Lamont-Doherty Earth Observatory
http://globec.whoi.edu/globec-dir/reports/oc342/oc342cruisereport.html
Report describing OC342
Cruise: OC343
OC343
R/V Oceanus
Community Standard Description
International Council for the Exploration of the Sea
R/V Oceanus
vessel
OC343
Dave Hebert
University of Rhode Island
http://globec.whoi.edu/globec-dir/reports/oc343/oc343rpt.html
Report describing OC343
Cruise: OC344
OC344
R/V Oceanus
Community Standard Description
International Council for the Exploration of the Sea
R/V Oceanus
vessel
OC344
Jim Irish
Woods Hole Oceanographic Institution
http://globec.whoi.edu/globec-dir/reports/oc344/OC344.pdf
Report describing OC344
Cruise: OC345
OC345
R/V Oceanus
Community Standard Description
International Council for the Exploration of the Sea
R/V Oceanus
vessel
OC345
Richard Limeburner
Woods Hole Oceanographic Institution
http://globec.whoi.edu/globec-dir/reports/oc345/crurptoc345.html
Report describing OC345
Cruise: OC346
OC346
R/V Oceanus
Community Standard Description
International Council for the Exploration of the Sea
R/V Oceanus
vessel
OC346
Jim Irish
Woods Hole Oceanographic Institution
http://globec.whoi.edu/globec-dir/reports/oc346/OC346.pdf
Report describing OC346
Cruise: OC347
OC347
R/V Oceanus
Community Standard Description
International Council for the Exploration of the Sea
R/V Oceanus
vessel
OC347
Dr Ronald Schlitz
Northeast Fisheries Science Center - Woods Hole
http://globec.whoi.edu/globec-dir/reports/oc347/oc347.htm
Report describing OC347
R/V Endeavor
Community Standard Description
International Council for the Exploration of the Sea
R/V Endeavor
vessel
R/V Oceanus
Community Standard Description
International Council for the Exploration of the Sea
R/V Oceanus
vessel