http://lod.bco-dmo.org/id/dataset/3323
eng; USA
utf8
dataset
Highest level of data collection, from a common set of sensors or instrumentation, usually within the same research project
Biological and Chemical Oceanography Data Management Office (BCO-DMO)
Unavailable
508-289-2009
WHOI MS#36
Woods Hole
MA
02543
USA
info@bco-dmo.org
http://www.bco-dmo.org
Monday - Friday 8:00am - 5:00pm
For questions regarding this resource, please contact BCO-DMO via the email address provided.
pointOfContact
2010-06-16
ISO 19115-2 Geographic Information - Metadata - Part 2: Extensions for Imagery and Gridded Data
ISO 19115-2:2009(E)
Colorimetric nutrient analysis from CTD Casts from R/V Tangaroa cruise VDT0410 in the South East of New Zealand, S.W. Bounty Trough in 2004 (SAGE project)
2010-03-29
publication
2010-03-29
revision
BCO-DMO Linked Data URI
2010-03-29
creation
http://lod.bco-dmo.org/id/dataset/3323
Dr Stuart Pickmere
New Zealand National Institute of Water and Atmospheric Research
principalInvestigator
Biological and Chemical Oceanography Data Management Office (BCO-DMO)
Unavailable
508-289-2009
WHOI MS#36
Woods Hole
MA
02543
USA
info@bco-dmo.org
http://www.bco-dmo.org
Monday - Friday 8:00am - 5:00pm
For questions regarding this resource, please contact BCO-DMO via the email address provided.
publisher
Cite this dataset as: Pickmere, S. (2010) Colorimetric nutrient analysis from CTD Casts from R/V Tangaroa cruise VDT0410 in the South East of New Zealand, S.W. Bounty Trough in 2004 (SAGE project). Biological and Chemical Oceanography Data Management Office (BCO-DMO). (Version 29March2010) Version Date 2010-03-29 [if applicable, indicate subset used]. http://lod.bco-dmo.org/id/dataset/3323 [access date]
Colorimetric nutrient analysis from CTD Casts Dataset Description: <p>Colorimetric nutrient analysis from CTD Casts</p> Methods and Sampling: <p><a href="http://data.bco-dmo.org/Fe_Synthesis/SAGE/SAGE_Voyage_Report.pdf">Refer to SAGE Voyage Report</a> <br />
<br />
<b>CTD-related instrumentation consisted of:</b><br />
- a Seabird Electronics (SBE) 911plus CTD with:<br />
- SBE-5 pumped SBE-3 temperature, SBE-4 conductivity and SBE-43 dissolved oxygen sensors.<br />
- SBE-5 pumped secondary SBE-3 temperature and SBE-4 conductivity sensors.<br />
- Seapoint Sensors, Inc. SCF chlorophyll fluorometer.<br />
- 25-cm Wetlabs C-star transmissometer.<br />
- Biosherical Instruments Inc. photosynthetic ally active radiation (PAR) sensor, model QSP200L4S.<br />
- Datasonics sonar altimeter, model PSA-900D.<br />
- a SBE 32 24x10-litre Carousel water sampler.<br />
- Ocean Test Equipment Standard BES external-spring Niskin-type water-sampling bottles.<br />
- Salinity sample bottles.<br />
- CTD winch with 10-km 10.5-mm single-core seacable.<br />
<br />
<b>Performance:</b> With the exception of issues noted below, the CTD-related instrumentation apparently functioned to specification and was operated essentially according to accepted practices for the duration of the voyage. A total of 85 one-cast CTD stations were completed, labelled u3502 to u3743.<br />
<br />
<b>PAR Sensor:</b> The initial CTD PAR sensor experienced an intermittent fault that manifested as a time variable offset, both cast to cast and, less evidently, within casts. It was eventually replaced with a formally identical spare unit for station u3719 cast 1 and subsequent casts.<br />
<br />
<b>Secondary Conductivity Sensor:</b> The initial secondary conductivity sensor eventually developed a clear fault (during station u3740 cast 1). It was replaced with a formally identical spare unit for station u3740 cast 1 and subsequent casts. The development of this fault was perhaps somewhat progressive, as possibly indicated by slight shifts in the primary-secondary conductivity difference on casts before station u3740 cast 1.<br />
<br />
<b>Methods:</b><br />
Nutrient samples were analysed using an Astoria Pacific API 300 micro-segmented flow analyser with digital detector, and methods developed for trace seawater analysis. Duplicate depth profile samples were filtered through acid washed<br />
Whatman GF/F filters into clean 250ml polyethylene bottles for analysis. Samples for underway analysis were drawn from the Tangaroa's surface supply at 7m, via a continuous filter (3.0um pore size) and using a LabPro computer controlled switching valve connected to the auto analyser sample line. Nitrate was reduced to nitrite by cadmium metal and determined (as nitrate plus nitrite) using an azo dye (API method 305-A177). Dissolved reactive phosphorus and dissolved reactive silicic acid were measured using the molybdenum blue method (API Methods 305-A204, 305-A221 respectively).</p>
Funding provided by New Zealand International Science and Technology Fund (ISAT) Award Number: unknown SAGE ISAT
Funding provided by New Zealand Foundation for Research, Science and Technology (FRST) Award Number: C01X0204
Funding provided by New Zealand Foundation for Research, Science and Technology (FRST) Award Number: C01X0223
Funding provided by National Science Foundation (NSF) Award Number: unknown SAGE NSF
completed
Dr Stuart Pickmere
New Zealand National Institute of Water and Atmospheric Research
NIWA
Hamilton
New Zealand
s.pickmere@niwa.co.nz
pointOfContact
asNeeded
Dataset Version: 29March2010
Unknown
station_CTD
date_NZST
time_local
SAGEtime
lon
lat
Patch
depth
Depth_Qualifier
Trip_Bottle
Description
Silicate
Nitrate
Ammonia
DRP
Nitrite
CTD Seabird 911
Nutrient Autoanalyzer
theme
None, User defined
No BCO-DMO term
time_local
longitude
latitude
depth
featureType
BCO-DMO Standard Parameters
CTD Sea-Bird 911
Nutrient Autoanalyzer
instrument
BCO-DMO Standard Instruments
VDT0410
service
Deployment Activity
South East of New Zealand, S.W. Bounty Trough
place
Locations
otherRestrictions
otherRestrictions
Access Constraints: none. Use Constraints: Please follow guidelines at: http://www.bco-dmo.org/terms-use Distribution liability: Under no circumstances shall BCO-DMO be liable for any direct, incidental, special, consequential, indirect, or punitive damages that result from the use of, or the inability to use, the materials in this data submission. If you are dissatisfied with any materials in this data submission your sole and exclusive remedy is to discontinue use.
Iron Synthesis
https://osprey.bco-dmo.org/program/2017
Iron Synthesis
The two main objectives of the Iron Synthesis program (SCOR Working Group proposal, 2005), are:
1. Data compilation: assembling a common open-access database of the in situ iron experiments, beginning with the first period (1993-2002; Ironex-1, Ironex-2, SOIREE, EisenEx, SEEDS-1; SOFeX, SERIES) where primary articles have already been published, to be followed by the 2004 experiments where primary articles are now in progress (EIFEX, SEEDS-2; SAGE, FeeP); similarly for the natural fertilizations S.O.JGOFS (1992), CROZEX (2004/2005) and KEOPS (2005).
2. Modeling and data synthesis of specific aspects of two or more such experiments for various topics such as physical mixing, phytoplankton productivity, overall ecosystem functioning, iron chemistry, CO2 budgeting, nutrient uptake ratios, DMS(P) processes, and combinations of these variables and processes.
SCOR Working Group proposal, 2005. "The Legacy of in situ Iron Enrichments: Data Compilation and Modeling".
http://www.scor-int.org/Working_Groups/wg131.htm
See also: SCOR Proceedings Vol. 42 Concepcion, Chile October 2006, pgs: 13-16 2.3.3 Working Group on The Legacy of in situ Iron Enrichments: Data Compilation and Modeling.
The first objective of the Iron Synthesis program involves a data recovery effort aimed at assembling a common, open-access database of data and metadata from a series of in-situ ocean iron fertilization experiments conducted between 1993 and 2005. Initially, funding for this effort is being provided by the Scientific Committee on Oceanic Research (SCOR) and the U.S. National Science Foundation (NSF).
Through the combined efforts of the principal investigators of the individual projects and the staff of Biological and Chemical Oceanography Data Management Office (BCO-DMO), data currently available primarily through individuals, disparate reports and data agencies, and in multiple formats, are being collected and prepared for addition to the BCO-DMO database from which they will be freely available to the community.
As data are contributed to the BCO-DMO office, they are organized into four overlapping categories:
1. Level 1, basic metadata
(e.g., description of project/study, general location, PI(s), participants);
2. Level 2, detailed metadata and basic shipboard data and routine ship's operations
(e.g., CTDs, underway measurements, sampling event logs);
3. Level 3, detailed metadata and data from specialized observations
(e.g., discrete observations, experimental results, rate measurements) and
4. Level 4, remaining datasets
(e.g., highest level of detailed data available from each study).
Collaboration with BCO-DMO staff began in March of 2008 and initial efforts have been directed toward basic project descriptions, levels 1 and 2 metadata and basic data, with detailed and more detailed data files being incorporated as they become available and are processed.
Related file
Program Documentation
The Iron Synthesis Program is funded jointly by the Scientific Committee on Oceanic Research (SCOR) and the U.S. National Science Foundation (NSF).
FeSynth
largerWorkCitation
program
United States Surface Ocean Lower Atmosphere Study
http://www.us-solas.org/
United States Surface Ocean Lower Atmosphere Study
The Surface Ocean Lower Atmosphere Study (SOLAS) program is designed to enable researchers from different disciplines to interact and investigate the multitude of processes and interactions between the coupled ocean and atmosphere.
Oceanographers and atmospheric scientists are working together to improve understanding of the fate, transport, and feedbacks of climate relevant compounds, and also weather and hazards that are affected by processes at the surface ocean.
Oceanographers and atmospheric scientists are working together to improve understanding of the fate, transport, and feedbacks of climate relevant compounds.
Physical, chemical, and biological research near the ocean-atmosphere interface must be performed in synergy to extend our current knowledge to adequately understand and forecast changes on short and long time frames and over local and global spatial scales.
The findings obtained from SOLAS are used to improve knowledge at process scale that will lead to better quantification of fluxes of climate relevant compounds such as CO2, sulfur and nitrogen compounds, hydrocarbons and halocarbons, as well as dust, energy and momentum. This activity facilitates a fundamental understanding to assist the societal needs for climate change, environmental health, weather prediction, and national security.
The US SOLAS program is a component of the International SOLAS program where collaborations are forged with investigators around the world to examine SOLAS issues ubiquitous to the world's oceans and atmosphere.
» International SOLAS Web site
Science Implementation Strategy Reports
US-SOLAS (4 MB PDF file)
Other SOLAS reports are available for download from the US SOLAS Web site
U.S. SOLAS
largerWorkCitation
program
Surface-Ocean Lower-Atmosphere Studies Air-Sea Gas Exchange (Experiment)
http://www.niwascience.co.nz/rc/atmos/sage/
Surface-Ocean Lower-Atmosphere Studies Air-Sea Gas Exchange (Experiment)
<p>While not officially funded as a U.S. SOLAS project, SAGE included<br />
significant U.S. participation and it's science themes were consistent<br />
with those of the International SOLAS program.</p>
<p>[from <a href="http://www.us-solas.org:8080/Plone/projects/the-us-solas-in-the-sage-study ">http://www.us-solas.org:8080/Plone/projects/the-us-solas-in-the-sage-study</a> (26 may 2008)]<br />
SAGE was a mesoscale Fe addition experiment run after the seasonal autumnal<br />
bloom of the sub-Antarctic showed a small biological response to Fe addition.<br />
The SF6/3He dual-tracer experiment extended the range of gas exchange measurement<br />
into stronger wind regimes typical of the Southern Ocean.</p>
<p>A goal of the SAGE project was to increase understanding of air-water Gas Exchange,<br />
Mixed Layer structure, skin/surface properties, biogenic gases and atmospheric fluxes.<br />
Core measurements included Carbon, N2/O2, noble gas, DMS(P), SO2, N2O, CO, CDOM CN<br />
and aerosol chemistry.</p>
<p>One cruise was conducted aboard the Research Vessel Tangaroa and instrumentation<br />
included CARIOCA pCO2 Buoys, Shipboard Gill R3A Anemometer mast, SAMI pCO2 sensors,<br />
SkinDeep vertical profiler, MAERI, SCAMP/TRAMP temperature microstructure profiler,<br />
sparbuoy, ADCP, S-band radar, FRRF, flow cytometer, primary production, nutrients,<br />
Fe, Meteorology and radiosondes.</p>
<p><em>from "DSR intro.doc"; by Mike Harvey described as in preparation for Deep Sea Research II</em><br />
The SOLAS air-sea gas exchange experiment (SAGE) was a combined gas-transfer process<br />
study and iron fertilisation experiment conducted in sub-Antarctic waters of the<br />
south-west Bounty Trough (46.5°S 172.5°E) to the south-east of New Zealand between<br />
mid-March and mid-April 2004.</p>
<p>The experiment was designed as a lagrangian study of air-sea gas exchange processes<br />
of CO2, DMS and other biogenic gases associated with an iron-induced phytoplankton<br />
bloom. In conjunction with the iron fertilisation a dual tracer SF6/3He release<br />
served quantify both patch evolution and air-sea tracer exchange at the 10's of km's<br />
scale. Within this patch local/micrometeorological (100's m scale) gas exchange<br />
process studies quantified physical variables such as near-surface turbulence,<br />
temperature microstructure at the interface, wave properties and wind speed to enable<br />
development of improved gas exchange models for the frequently windy Southern Ocean.</p>
<p>After 15 days and four iron additions totalling 1.1 tonne Fe2+ there was a doubling<br />
in both column chlorophyll-a and primary productivity; a very modest response compared<br />
with other mesoscale iron enrichment. An investigation of factors limiting bloom<br />
development considered co-limitation by light, other nutrients, phyto-plankton seed-stocks<br />
and grazing regulation.</p>
<p> </p>
<h3>Related files</h3>
<p><a href="http://data.bco-dmo.org/Fe_Synthesis/SAGE/SAGE_precruise_Science_Plan_v1.9.pdf">SAGE precruise Science Plan</a><br />
<a href="http://data.bco-dmo.org/Fe_Synthesis/SAGE/SAGE_precruise_Voyage_Plan.pdf">SAGE precruise Voyage Plan</a><br />
<a href="http://data.bco-dmo.org/Fe_Synthesis/SAGE/SAGE_Voyage_Report.pdf">SAGE Voyage Report</a><br />
<a href="http://bcodata.whoi.edu/Fe_Synthesis/SAGE/SAGE_Release_times.pdf">SAGE Release Times</a><br />
<a href="http://data.bco-dmo.org/Fe_Synthesis/SAGE/SAGE_surface_physics_metadata2.pdf">SAGE Surface Physics Metadata Report</a></p>
<p><a href="http://bcodata.whoi.edu/Fe_Synthesis/SAGE/SAGE_SST_track_all.jpg" target="_blank"">SAGE Cruise Track from SST data (.jpg image)</a><br />
<strong>Note:<br />
SAGEtime/Experiment time zero (0.0000) is: 25 March 2004, 19:00 Local Time (NZST) </strong><em><span style="font-size:11px">(from SAGE Voyage Report, Voyage Timetable, Pages 5-6)</span></em><br />
</p>
SAGE
largerWorkCitation
project
eng; USA
oceans
South East of New Zealand, S.W. Bounty Trough
2010-03-29
South-East of New Zealand in the vicinity of the S.W. Bounty Trough; Sub-Antarctic waters near 46.5°S 172.5°E
0
BCO-DMO catalogue of parameters from Colorimetric nutrient analysis from CTD Casts from R/V Tangaroa cruise VDT0410 in the South East of New Zealand, S.W. Bounty Trough in 2004 (SAGE project)
Biological and Chemical Oceanography Data Management Office (BCO-DMO)
Unavailable
508-289-2009
WHOI MS#36
Woods Hole
MA
02543
USA
info@bco-dmo.org
http://www.bco-dmo.org
Monday - Friday 8:00am - 5:00pm
For questions regarding this resource, please contact BCO-DMO via the email address provided.
pointOfContact
http://lod.bco-dmo.org/id/dataset-parameter/21512.rdf
Name: station_CTD
Units: text
Description: <p>SAGE CTD station identifier </p>
http://lod.bco-dmo.org/id/dataset-parameter/21513.rdf
Name: date_NZST
Units: YYYYMMDD
Description: <p>Date (NZST)</p>
http://lod.bco-dmo.org/id/dataset-parameter/21514.rdf
Name: time_local
Units: HHMM
Description: <p>Time (NZST)</p>
http://lod.bco-dmo.org/id/dataset-parameter/21515.rdf
Name: SAGEtime
Units: dd.xx
Description: <p>Custom project time pre/post 25March2004 19:00 Local Time (NZST)</p>
http://lod.bco-dmo.org/id/dataset-parameter/21516.rdf
Name: lon
Units: decimal degrees
Description: <p>Station longitude (West is negative)</p>
http://lod.bco-dmo.org/id/dataset-parameter/21517.rdf
Name: lat
Units: decimal degrees
Description: <p>Station latitude (South is negative)</p>
http://lod.bco-dmo.org/id/dataset-parameter/21518.rdf
Name: Patch
Units: text
Description: <p>Patch designation (In/Out/Pre/Edge)</p>
http://lod.bco-dmo.org/id/dataset-parameter/21519.rdf
Name: depth
Units: meters
Description: <p>sample depth. Note: There are duplicate depths</p>
http://lod.bco-dmo.org/id/dataset-parameter/21520.rdf
Name: Depth_Qualifier
Units: text
Description: <p>Value here was included in Depth data cell with comment to "remove duplicate numbers"; Made into a separate data column</p>
http://lod.bco-dmo.org/id/dataset-parameter/21521.rdf
Name: Trip_Bottle
Units: integer
Description: <p>Data column not identified. Comment that it could be removed. Retained in case it relates to Depth_Qualifier</p>
http://lod.bco-dmo.org/id/dataset-parameter/21522.rdf
Name: Description
Units: text
Description: <p>Station/Sampling decscription</p>
http://lod.bco-dmo.org/id/dataset-parameter/21523.rdf
Name: Silicate
Units: umol/l
Description: <p>Silicate</p>
http://lod.bco-dmo.org/id/dataset-parameter/21524.rdf
Name: Nitrate
Units: umol/l
Description: <p>Nitrate</p>
http://lod.bco-dmo.org/id/dataset-parameter/21525.rdf
Name: Ammonia
Units: umol/l
Description: <p>Ammonia</p>
http://lod.bco-dmo.org/id/dataset-parameter/21526.rdf
Name: DRP
Units: umol/l
Description: <p>DRP</p>
http://lod.bco-dmo.org/id/dataset-parameter/21527.rdf
Name: Nitrite
Units: umol/l
Description: <p>Nitrite</p>
GB/NERC/BODC > British Oceanographic Data Centre, Natural Environment Research Council, United Kingdom
Biological and Chemical Oceanography Data Management Office (BCO-DMO)
Unavailable
508-289-2009
WHOI MS#36
Woods Hole
MA
02543
USA
info@bco-dmo.org
http://www.bco-dmo.org
Monday - Friday 8:00am - 5:00pm
For questions regarding this resource, please contact BCO-DMO via the email address provided.
pointOfContact
36501
https://datadocs.bco-dmo.org/file/WWW1EGLCxpnJNZ/CTD_Nutrients.csv
CTD_Nutrients.csv
Primary data file for dataset ID 3323
download
https://osprey.bco-dmo.org/dataset/3323/data/download
download
onLine
dataset
<p><a href="http://data.bco-dmo.org/Fe_Synthesis/SAGE/SAGE_Voyage_Report.pdf">Refer to SAGE Voyage Report</a> <br />
<br />
<b>CTD-related instrumentation consisted of:</b><br />
- a Seabird Electronics (SBE) 911plus CTD with:<br />
- SBE-5 pumped SBE-3 temperature, SBE-4 conductivity and SBE-43 dissolved oxygen sensors.<br />
- SBE-5 pumped secondary SBE-3 temperature and SBE-4 conductivity sensors.<br />
- Seapoint Sensors, Inc. SCF chlorophyll fluorometer.<br />
- 25-cm Wetlabs C-star transmissometer.<br />
- Biosherical Instruments Inc. photosynthetic ally active radiation (PAR) sensor, model QSP200L4S.<br />
- Datasonics sonar altimeter, model PSA-900D.<br />
- a SBE 32 24x10-litre Carousel water sampler.<br />
- Ocean Test Equipment Standard BES external-spring Niskin-type water-sampling bottles.<br />
- Salinity sample bottles.<br />
- CTD winch with 10-km 10.5-mm single-core seacable.<br />
<br />
<b>Performance:</b> With the exception of issues noted below, the CTD-related instrumentation apparently functioned to specification and was operated essentially according to accepted practices for the duration of the voyage. A total of 85 one-cast CTD stations were completed, labelled u3502 to u3743.<br />
<br />
<b>PAR Sensor:</b> The initial CTD PAR sensor experienced an intermittent fault that manifested as a time variable offset, both cast to cast and, less evidently, within casts. It was eventually replaced with a formally identical spare unit for station u3719 cast 1 and subsequent casts.<br />
<br />
<b>Secondary Conductivity Sensor:</b> The initial secondary conductivity sensor eventually developed a clear fault (during station u3740 cast 1). It was replaced with a formally identical spare unit for station u3740 cast 1 and subsequent casts. The development of this fault was perhaps somewhat progressive, as possibly indicated by slight shifts in the primary-secondary conductivity difference on casts before station u3740 cast 1.<br />
<br />
<b>Methods:</b><br />
Nutrient samples were analysed using an Astoria Pacific API 300 micro-segmented flow analyser with digital detector, and methods developed for trace seawater analysis. Duplicate depth profile samples were filtered through acid washed<br />
Whatman GF/F filters into clean 250ml polyethylene bottles for analysis. Samples for underway analysis were drawn from the Tangaroa's surface supply at 7m, via a continuous filter (3.0um pore size) and using a LabPro computer controlled switching valve connected to the auto analyser sample line. Nitrate was reduced to nitrite by cadmium metal and determined (as nitrate plus nitrite) using an azo dye (API method 305-A177). Dissolved reactive phosphorus and dissolved reactive silicic acid were measured using the molybdenum blue method (API Methods 305-A204, 305-A221 respectively).</p>
Specified by the Principal Investigator(s)
<p><b>BCO-DMO Processing Notes</b><br />
Generated from original spreadsheet Nutrients_SAGE.xls<br />
<br />
<b>BCO-DMO Edits</b><br />
- blank lines removed<br />
- &quot;Profile&quot; changed to station_CTD for compatibility with other data<br />
- station_CTD, date, time, lat, lon, SAGEtime and Patch merged in from CTD station data<br />
- Multi-record description merged into a one line record<br />
- Depth_qualifier column added. Contains the add on comment from the depth column<br />
- &quot;nd&quot; inserted into blank cells<br />
- parameter names modified to conform to BCO-DMO convention</p>
Specified by the Principal Investigator(s)
asNeeded
7.x-1.1
Biological and Chemical Oceanography Data Management Office (BCO-DMO)
Unavailable
508-289-2009
WHOI MS#36
Woods Hole
MA
02543
USA
info@bco-dmo.org
http://www.bco-dmo.org
Monday - Friday 8:00am - 5:00pm
For questions regarding this resource, please contact BCO-DMO via the email address provided.
pointOfContact
CTD Seabird 911
CTD Seabird 911
PI Supplied Instrument Name: CTD Seabird 911 PI Supplied Instrument Description:CTD-related instrumentation consisted of:
- a Seabird Electronics (SBE) 911plus CTD with:
- SBE-5 pumped SBE-3 temperature, SBE-4 conductivity and SBE-43 dissolved oxygen
sensors.
- SBE-5 pumped secondary SBE-3 temperature and SBE-4 conductivity sensors.
- Seapoint Sensors, Inc. SCF chlorophyll fluorometer.
- 25-cm Wetlabs C-star transmissometer.
- Biosherical Instruments Inc. photosynthetic ally active radiation (PAR) sensor, model
QSP200L4S.
- Datasonics sonar altimeter, model PSA-900D.
- a SBE 32 24x10-litre Carousel water sampler.
- Ocean Test Equipment Standard BES external-spring Niskin-type water-sampling bottles.
- Salinity sample bottles.
- CTD winch with 10-km 10.5-mm single-core seacable. Instrument Name: CTD Sea-Bird 911 Instrument Short Name:CTD SBE 911 Instrument Description: The Sea-Bird SBE 911 is a type of CTD instrument package. The SBE 911 includes the SBE 9 Underwater Unit and the SBE 11 Deck Unit (for real-time readout using conductive wire) for deployment from a vessel. The combination of the SBE 9 and SBE 11 is called a SBE 911. The SBE 9 uses Sea-Bird's standard modular temperature and conductivity sensors (SBE 3 and SBE 4). The SBE 9 CTD can be configured with auxiliary sensors to measure other parameters including dissolved oxygen, pH, turbidity, fluorescence, light (PAR), light transmission, etc.). More information from Sea-Bird Electronics. Community Standard Description: http://vocab.nerc.ac.uk/collection/L22/current/TOOL0035/
Nutrient Autoanalyzer
Nutrient Autoanalyzer
PI Supplied Instrument Name: Nutrient Autoanalyzer PI Supplied Instrument Description:Nutrient samples were analysed using an Astoria Pacific API 300 micro-segmented flow analyser with digital detector, and methods developed for trace seawater
analysis. Instrument Name: Nutrient Autoanalyzer Instrument Short Name:Nutrient Autoanalyzer Instrument Description: Nutrient Autoanalyzer is a generic term used when specific type, make and model were not specified. In general, a Nutrient Autoanalyzer is an automated flow-thru system for doing nutrient analysis (nitrate, ammonium, orthophosphate, and silicate) on seawater samples. Community Standard Description: http://vocab.nerc.ac.uk/collection/L05/current/LAB04/
Cruise: VDT0410
VDT0410
Community Standard Description
International Council for the Exploration of the Sea
R/V Tangaroa
vessel
VDT0410
Mike Harvey
New Zealand National Institute of Water and Atmospheric Research
http://bcodata.whoi.edu/Fe_Synthesis/SAGE/SAGE_Voyage_Report.pdf
Report describing VDT0410
Community Standard Description
International Council for the Exploration of the Sea
R/V Tangaroa
vessel