http://lod.bco-dmo.org/id/dataset/3400
eng; USA
utf8
dataset
Highest level of data collection, from a common set of sensors or instrumentation, usually within the same research project
Biological and Chemical Oceanography Data Management Office (BCO-DMO)
Unavailable
508-289-2009
WHOI MS#36
Woods Hole
MA
02543
USA
info@bco-dmo.org
http://www.bco-dmo.org
Monday - Friday 8:00am - 5:00pm
For questions regarding this resource, please contact BCO-DMO via the email address provided.
pointOfContact
2010-12-22
ISO 19115-2 Geographic Information - Metadata - Part 2: Extensions for Imagery and Gridded Data
ISO 19115-2:2009(E)
CTD cast temperature, salinity, oxygen, and other measurements from R/V Oceanus cruise OC454-02 in the Mediterranean Sea (Pickled Protists project)
2011-01-03
publication
2011-01-03
revision
BCO-DMO Linked Data URI
2011-01-03
creation
http://lod.bco-dmo.org/id/dataset/3400
Virginia P. Edgcomb
Woods Hole Oceanographic Institution
principalInvestigator
Biological and Chemical Oceanography Data Management Office (BCO-DMO)
Unavailable
508-289-2009
WHOI MS#36
Woods Hole
MA
02543
USA
info@bco-dmo.org
http://www.bco-dmo.org
Monday - Friday 8:00am - 5:00pm
For questions regarding this resource, please contact BCO-DMO via the email address provided.
publisher
Cite this dataset as: Edgcomb, V. P. (2011) CTD cast temperature, salinity, oxygen, and other measurements from R/V Oceanus cruise OC454-02 in the Mediterranean Sea (Pickled Protists project). Biological and Chemical Oceanography Data Management Office (BCO-DMO). Version Date 2011-01-03 [if applicable, indicate subset used]. http://lod.bco-dmo.org/id/dataset/3400 [access date]
CTD cast temperature, salinity, oxygen, etc from OC454-02 Dataset Description: <p>11 CTD casts were done during the cruise to identify the depth of the brine layer and collect water samples using the Niskin bottles.</p>
<p>Casts were distributed between two brine basins, and the Comment field in the data indicates whether a CTD cast was in the vicinity of the Discovery or Urania brine basin. The cast comments recorded prior to acquisition are: <br />
<br />
cast 3: intending to sample the interface. 3590 as published in Waller, and which coincides with our CTD data. Salinometer readings are more or less same as seawater, but this is misleading because the Na conc in the brine is 68 (VanderWielen), which is the reading that Kostas got with the salinometer for water we believe is brine (soapy, low or undetectable oxygen). Using the Fornari camera here. <br />
cast 5: the coordinates for this site were different from Yakimov. We are at 35 13.51N and 21 28.24E<br />
cast 6: GOING TO INT.<br />
cast 7: Second CTD cast to interface. This time need to go a little deeper<br />
cast 8: last sample was too deep so now targeting<br />
cast 9: to interface<br />
cast 11: joan's multicore 1 site &quot;on bottom&quot; coords</p> Methods and Sampling: <p>11 CTD casts were done during the cruise. Data were recovered from the WHOI Data Library and Archives. CTD profile data were recovered from the Seabird *.cnv files processed during the cruise.</p>
<p>No information was contributed as to any quality assurance done during the cruise. CTD profile data files from 11 casts were processed during the cruise using the Seabird software utilities. All casts (except for 9) were pressure binned (binavg_* routines). The cast 9 data file processing stopped after the loopedit step; no binavg done.</p>
<p>Seabird CTD header from cast 11 .cnv file:</p>
<pre>
* Sea-Bird SBE 9 Data File:
* FileName = C:dataoc454-20011.hdr
* Software Version Seasave V 7.18d
* Temperature SN = 4303
* Conductivity SN = 2707
* Number of Bytes Per Scan = 40
* Number of Voltage Words = 5
* Number of Scans Averaged by the Deck Unit = 1
* System UpLoad Time = Aug 03 2009 22:29:34
* NMEA Latitude = 35 20.14 N
* NMEA Longitude = 021 40.17 E
* NMEA UTC (Time) = Aug 03 2009 22:29:33
* Store Lat/Lon Data = Append to Every Scan
** this is joan's multicore 1 site &quot;on bottom&quot; coords
# nquan = 22
# nvalues = 3917
# units = specified
# name 0 = prDM: Pressure, Digiquartz [db]
# name 1 = t090C: Temperature [ITS-90, deg C]
# name 2 = t190C: Temperature, 2 [ITS-90, deg C]
# name 3 = sal00: Salinity [PSU]
# name 4 = sal11: Salinity, 2 [PSU]
# name 5 = c0S/m: Conductivity [S/m]
# name 6 = c1S/m: Conductivity, 2 [S/m]
# name 7 = sbeox0V: Oxygen Voltage, SBE 43
# name 8 = sbeox0ML/L: Oxygen, SBE 43 [ml/l]
# name 9 = xmiss: Beam Transmission, Chelsea/Seatech/Wetlab CStar [%]
# name 10 = density00: Density [density, Kg/m^3]
# name 11 = flECO-AFL: Fluorescence, Wetlab ECO-AFL/FL [mg/m^3]
# name 12 = upoly0: Upoly 0, WetLabs Turbidity
# name 13 = altM: Altimeter [m]
# name 14 = sbeox1V: Oxygen Voltage, SBE 43, 2
# name 15 = sbeox1ML/L: Oxygen, SBE 43, 2 [ml/l]
# name 16 = sbeox0ML/L: Oxygen, SBE 43 [ml/l], WS = 2
# name 17 = sal00: Salinity [PSU]
# name 18 = sbeox1ML/L: Oxygen, SBE 43, 2 [ml/l], WS = 2
# name 19 = sal11: Salinity, 2 [PSU]
# name 20 = depSM: Depth [salt water, m], lat = 35.3357
# name 21 = flag: flag
# span 0 = 2.000, 3638.000
# span 1 = 13.8108, 27.0088
# span 2 = 13.8108, 27.0112
# span 3 = 38.7345, 97.3056
# span 4 = 38.7987, 97.2901
# span 5 = 4.640047, 11.543013
# span 6 = 4.645992, 11.574247
# span 7 = 0.5036, 3.3284
# span 8 = -23.97469, 5.90225
# span 9 = -3.8414, 98.8069
# span 10 = 1025.7462, 1089.5758
# span 11 = -0.0330, 1.0039
# span 12 = 0.0494042, 2.0979324
# span 13 = 5.97, 99.63
# span 14 = 0.5409, 3.0223
# span 15 = -41.88372, 5.70259
# span 16 = -58.50867, 5.88089
# span 17 = 38.7345, 97.3128
# span 18 = -46.32159, 5.69958
# span 19 = 38.7987, 97.2938
# span 20 = 1.985, 3580.853
# span 21 = 0.0000e+00, 0.0000e+00
# interval = decibars: 1
# start_time = Aug 03 2009 22:29:34
# bad_flag = -9.990e-29
# sensor 0 = Frequency 0 temperature, primary, 4303, 2008-09-25
# sensor 1 = Frequency 1 conductivity, primary, 2707, 2008-09-24, cpcor = -9.5700e-08
# sensor 2 = Frequency 2 pressure, 69685, 12/18/2002
# sensor 3 = Frequency 3 temperature, secondary, 4312, 2008-09-23
# sensor 4 = Frequency 4 conductivity, secondary, 2768, 2008-09-25, cpcor = -9.5700e-08
# sensor 5 = Extrnl Volt 0 WET Labs, ECO_AFL
# sensor 6 = Extrnl Volt 1 userpoly 0, FLNTURTD-1013, 2008-04-18
# sensor 7 = Extrnl Volt 2 transmissometer, primary, CST-1117DR, 2008-04-30
# sensor 8 = Extrnl Volt 4 altimeter
# sensor 9 = Extrnl Volt 5 Oxygen, SBE, primary, 0794, 2009-03-13
# sensor 10 = Extrnl Volt 6 userpoly 1, Flashbird-5
# sensor 11 = Extrnl Volt 7 Oxygen, SBE, secondary, 0072, 2009-05-13
# sensor 12 = Extrnl Volt 9 surface irradiance (SPAR), degrees = 0.0
# datcnv_date = Aug 04 2009 00:03:54, 7.15
# datcnv_in = c:ctd_processingoc454-20011.hex c:ctd_processingoc454-20011.CON
# datcnv_skipover = 0
# wildedit_date = Aug 04 2009 00:04:07, 7.15
# wildedit_in = c:ctd_processingoc454-20011.cnv
# wildedit_pass1_nstd = 2.0
# wildedit_pass2_nstd = 20.0
# wildedit_pass2_mindelta = 1.000e+000
# wildedit_npoint = 100
# wildedit_vars = prDM t090C t190C sal00 sal11 c0S/m c1S/m sbeox0V sbeox0ML/L xmiss density00 flECO-AFL upoly0 altM sbeox1V sbeox1ML/L
# wildedit_excl_bad_scans = yes
# filter_date = Aug 04 2009 00:04:23, 7.15
# filter_in = c:ctd_processingoc454-20011.cnv
# filter_low_pass_tc_A = 0.030
# filter_low_pass_tc_B = 0.100
# filter_low_pass_A_vars = sal00 sal11 c0S/m c1S/m sbeox0V sbeox0ML/L xmiss density00 flECO-AFL upoly0 sbeox1V sbeox1ML/L
# filter_low_pass_B_vars = prDM
# alignctd_date = Aug 04 2009 00:04:53, 7.15
# alignctd_in = c:ctd_processingoc454-20011.cnv
# alignctd_adv = sbeox0V 4.000, sbeox0ML/L 4.000
# celltm_date = Aug 04 2009 00:05:09, 7.15
# celltm_in = c:ctd_processingoc454-20011.cnv
# celltm_alpha = 0.0300, 0.0300
# celltm_tau = 7.0000, 7.0000
# celltm_temp_sensor_use_for_cond = primary, secondary
# loopedit_date = Aug 04 2009 00:05:25, 7.15
# loopedit_in = c:ctd_processingoc454-20011.cnv
# loopedit_minVelocity = 0.100
# loopedit_surfaceSoak: do not remove
# loopedit_excl_bad_scans = yes
# Derive_date = Aug 04 2009 00:05:47, 7.15
# Derive_in = c:ctd_processingoc454-20011.cnv c:ctd_processingoc454-20011.CON
# derive_time_window_docdt = seconds: 2
# binavg_date = Aug 04 2009 00:06:08, 7.15
# binavg_in = c:ctd_processingoc454-20011.cnv
# binavg_bintype = decibars
# binavg_binsize = 1
# binavg_excl_bad_scans = yes
# binavg_skipover = 0
# binavg_surface_bin = no, min = 0.000, max = 0.000, value = 0.000
# file_type = ascii
*END*
</pre>
Funding provided by NSF Division of Ocean Sciences (NSF OCE) Award Number: OCE-0849578 Award URL: https://www.nsf.gov/awardsearch/show-award?AWD_ID=0849578
completed
Virginia P. Edgcomb
Woods Hole Oceanographic Institution
508-289-3734
Department of Geology and Geophysics 220 McLean Lab, MS #8
Woods Hole
MA
02543
USA
vedgcomb@whoi.edu
pointOfContact
asNeeded
Unknown
cast
date
time
lon
lat
Pmax
Comment
press
temp
sal
sigma_0
temp_S
sal_S
cond
cond_S
O2_ml_L
chl_a_fluor
turbid_v
trans
depth
CTD Sea-Bird SBE 911plus
SBE 43 Dissolved Oxygen Sensor
Transmissometer
Wet Labs ECO-AFL/FL Fluorometer
WetLabs FLNTU
theme
None, User defined
cast
date
time of day
longitude
latitude
max photosynthesis
comments
water pressure
water temperature at measurement depth
salinity
sigma-theta
temperature (temp2) from secondary sensor
salinity calculated from the CTD secondary sensors
conductivity
conductivity from the CTD secondary sensor
dissolved Oxygen
chlorophyll-a; fluorometric method
turbid_v
transmission
depth
featureType
BCO-DMO Standard Parameters
CTD Sea-Bird SBE 911plus
Sea-Bird SBE 43 Dissolved Oxygen Sensor
Transmissometer
Wet Labs ECO-AFL/FL Fluorometer
WetLabs FLNTU
instrument
BCO-DMO Standard Instruments
OC454-02
service
Deployment Activity
Mediterranean Sea
place
Locations
otherRestrictions
otherRestrictions
Access Constraints: none. Use Constraints: Please follow guidelines at: http://www.bco-dmo.org/terms-use Distribution liability: Under no circumstances shall BCO-DMO be liable for any direct, incidental, special, consequential, indirect, or punitive damages that result from the use of, or the inability to use, the materials in this data submission. If you are dissatisfied with any materials in this data submission your sole and exclusive remedy is to discontinue use.
Pickled Protists or Community Uniquely Adapted to Hypersalinity?
https://osprey.bco-dmo.org/project/2134
Pickled Protists or Community Uniquely Adapted to Hypersalinity?
<p>Protists are an essential component of microbial food webs and play a central role in global biogeochemical cycles, and thus are key players in sustaining the healthy functioning of any ecosystem. Over the past few years a rich diversity of protists has been revealed in a range of extreme environments, indicating that the frontiers of eukaryotic life are still being explored. Only recently, one of the most extreme marine environments known to science was discovered in the eastern Mediterranean Sea at a depth of ~3500m, namely deep hypersaline anoxic basins (DHABs). These basins are characterized by extremely high salt concentrations (up to saturation) that have been considered anathema to life. Instead, highly diverse communities of bacteria exist in the waters of these basins. With the exception of a preliminary study to this proposal that indicated a diverse and active assemblage of protists in the water column along the halocline and below the halocline, these DHABs remain largely unexplored regarding eukaryotic life forms. The sediments of the DHABs have not been explored for protists at all. </p>
<p>The investigators will collect water column and sediment samples on a short cruise to two basins with different brine chemistries. An exciting combination of molecular, cultivation-independent and culture-based approaches will be used to study the microbial communities of two basins. Investigators will use those approaches to determine adaptive strategies of marine protist communities to hypersaline, anoxic environments and the degree of their potential impact on biogeochemical cycling as a result of their predation activities, the degree to which the dominant protists maintain bacterial or archaeal symbionts, and the identity of those symbionts. The original research proposal identified Bannock and Discovery Basins as the field study areas, however the 2009 cruise collected samples at Discovery and Urania Basin. Methods to be employed include RNA-based sequence analysis of diversity based on 18S rDNA genes, statistical analyses of community composition and phylotype richness, geochemical documentation of the water column and sediments using classical and microelectrode approaches, expression profiling using 3'-UTR fragments of mRNAs, sequencing of complete gene transcripts for proteins appearing to confer adaptation to hypersalinity, analysis of the proteome signatures, FISH-SEM to characterize novel extremophiles, CARD-FISH to identify eukaryote prey and putative symbionts, and TEM to assess morphology and endobiont presence in common benthic morphotypes. </p>
<p>Hypersaline environments rank highly in the list of extreme systems that have attracted increasing notice in science as well as by the lay public. For example, considering predictions of increasing temperatures and drought in certain regions of our planet, the number of hypersaline habitats may increase dramatically causing this ecosystem to gain importance on a global scale. Thus, an understanding of the ecosystem in these habitats will help predict future ecosystem functioning due to global change. From a different perspective, revealing the mechanisms of adaptation to high salinity has become a major objective, both for biological science and for potential commercial exploitation of natural products associated with those adaptations. </p>
Pickled Protists
largerWorkCitation
project
eng; USA
oceans
Mediterranean Sea
2011-01-03
Mediterranean Sea
0
BCO-DMO catalogue of parameters from CTD cast temperature, salinity, oxygen, and other measurements from R/V Oceanus cruise OC454-02 in the Mediterranean Sea (Pickled Protists project)
Biological and Chemical Oceanography Data Management Office (BCO-DMO)
Unavailable
508-289-2009
WHOI MS#36
Woods Hole
MA
02543
USA
info@bco-dmo.org
http://www.bco-dmo.org
Monday - Friday 8:00am - 5:00pm
For questions regarding this resource, please contact BCO-DMO via the email address provided.
pointOfContact
http://lod.bco-dmo.org/id/dataset-parameter/23033.rdf
Name: cast
Units: integer
Description: <p>CTD cast number</p>
http://lod.bco-dmo.org/id/dataset-parameter/23034.rdf
Name: date
Units: YYMMMDD
Description: <p>start date (UTC) of cast as YYYYMMDD</p>
http://lod.bco-dmo.org/id/dataset-parameter/23035.rdf
Name: time
Units: HHMM
Description: <p>start time (UTC) of cast as HHMM</p>
http://lod.bco-dmo.org/id/dataset-parameter/23036.rdf
Name: lon
Units: decimal degrees
Description: <p>longitude (positive is East)</p>
http://lod.bco-dmo.org/id/dataset-parameter/23037.rdf
Name: lat
Units: decimal degrees
Description: <p>latitude (positive is North)</p>
http://lod.bco-dmo.org/id/dataset-parameter/23038.rdf
Name: Pmax
Units: decibars
Description: <p>maximum pressure recorded during cast</p>
http://lod.bco-dmo.org/id/dataset-parameter/23039.rdf
Name: Comment
Units: dimensionless
Description: <p>comment indicating station location</p>
http://lod.bco-dmo.org/id/dataset-parameter/23040.rdf
Name: press
Units: decibars
Description: <p>water pressure from CTD Digiquartz sensor</p>
http://lod.bco-dmo.org/id/dataset-parameter/23041.rdf
Name: temp
Units: degrees Celsius
Description: <p>water temperature from primary T0 sensor (ITS-90)</p>
http://lod.bco-dmo.org/id/dataset-parameter/23042.rdf
Name: sal
Units: dimensionless
Description: <p>salinity from CTD (PSU) (from primary T0 and C0 sensors)</p>
http://lod.bco-dmo.org/id/dataset-parameter/23043.rdf
Name: sigma_0
Units: kilograms/meter^3
Description: <p>water potential density - 1000</p>
http://lod.bco-dmo.org/id/dataset-parameter/23044.rdf
Name: temp_S
Units: degrees Celsius
Description: <p>water temperature from secondary T1 sensor (ITS-90)</p>
http://lod.bco-dmo.org/id/dataset-parameter/23045.rdf
Name: sal_S
Units: dimensionless
Description: <p>salinity from CTD (PSU) (from secondary T1 and C1 sensors)</p>
http://lod.bco-dmo.org/id/dataset-parameter/23046.rdf
Name: cond
Units: Siemens/meter
Description: <p>conductivity from primary C0 sensor</p>
http://lod.bco-dmo.org/id/dataset-parameter/23047.rdf
Name: cond_S
Units: Siemens/meter
Description: <p>conductivity from secondary C1 sensor</p>
http://lod.bco-dmo.org/id/dataset-parameter/23048.rdf
Name: O2_ml_L
Units: milliliters/liter
Description: <p>dissolved Oxygen from SBE 43</p>
http://lod.bco-dmo.org/id/dataset-parameter/23049.rdf
Name: chl_a_fluor
Units: milligrams/meter^3
Description: <p>fluorescence from Wetlab ECO-AFL/FL; rescaled units are numerically equivalent to chlorophyll-a concentrations</p>
http://lod.bco-dmo.org/id/dataset-parameter/23050.rdf
Name: turbid_v
Units: volts
Description: <p>turbidity from WetLabs sensor</p>
http://lod.bco-dmo.org/id/dataset-parameter/23051.rdf
Name: trans
Units: percent
Description: <p>transmissometer from primary CST-1117DR sensor</p>
http://lod.bco-dmo.org/id/dataset-parameter/23072.rdf
Name: depth
Units: meters
Description: <p>water depth calculated from CTD pressure using starting latitude for each cast</p>
GB/NERC/BODC > British Oceanographic Data Centre, Natural Environment Research Council, United Kingdom
Biological and Chemical Oceanography Data Management Office (BCO-DMO)
Unavailable
508-289-2009
WHOI MS#36
Woods Hole
MA
02543
USA
info@bco-dmo.org
http://www.bco-dmo.org
Monday - Friday 8:00am - 5:00pm
For questions regarding this resource, please contact BCO-DMO via the email address provided.
pointOfContact
7567638
https://datadocs.bco-dmo.org/file/oAAmB5PUlXwP1n/CTD.csv
CTD.csv
Primary data file for dataset ID 3400
download
https://osprey.bco-dmo.org/dataset/3400/data/download
download
onLine
dataset
<p>11 CTD casts were done during the cruise. Data were recovered from the WHOI Data Library and Archives. CTD profile data were recovered from the Seabird *.cnv files processed during the cruise.</p>
<p>No information was contributed as to any quality assurance done during the cruise. CTD profile data files from 11 casts were processed during the cruise using the Seabird software utilities. All casts (except for 9) were pressure binned (binavg_* routines). The cast 9 data file processing stopped after the loopedit step; no binavg done.</p>
<p>Seabird CTD header from cast 11 .cnv file:</p>
<pre>
* Sea-Bird SBE 9 Data File:
* FileName = C:dataoc454-20011.hdr
* Software Version Seasave V 7.18d
* Temperature SN = 4303
* Conductivity SN = 2707
* Number of Bytes Per Scan = 40
* Number of Voltage Words = 5
* Number of Scans Averaged by the Deck Unit = 1
* System UpLoad Time = Aug 03 2009 22:29:34
* NMEA Latitude = 35 20.14 N
* NMEA Longitude = 021 40.17 E
* NMEA UTC (Time) = Aug 03 2009 22:29:33
* Store Lat/Lon Data = Append to Every Scan
** this is joan's multicore 1 site &quot;on bottom&quot; coords
# nquan = 22
# nvalues = 3917
# units = specified
# name 0 = prDM: Pressure, Digiquartz [db]
# name 1 = t090C: Temperature [ITS-90, deg C]
# name 2 = t190C: Temperature, 2 [ITS-90, deg C]
# name 3 = sal00: Salinity [PSU]
# name 4 = sal11: Salinity, 2 [PSU]
# name 5 = c0S/m: Conductivity [S/m]
# name 6 = c1S/m: Conductivity, 2 [S/m]
# name 7 = sbeox0V: Oxygen Voltage, SBE 43
# name 8 = sbeox0ML/L: Oxygen, SBE 43 [ml/l]
# name 9 = xmiss: Beam Transmission, Chelsea/Seatech/Wetlab CStar [%]
# name 10 = density00: Density [density, Kg/m^3]
# name 11 = flECO-AFL: Fluorescence, Wetlab ECO-AFL/FL [mg/m^3]
# name 12 = upoly0: Upoly 0, WetLabs Turbidity
# name 13 = altM: Altimeter [m]
# name 14 = sbeox1V: Oxygen Voltage, SBE 43, 2
# name 15 = sbeox1ML/L: Oxygen, SBE 43, 2 [ml/l]
# name 16 = sbeox0ML/L: Oxygen, SBE 43 [ml/l], WS = 2
# name 17 = sal00: Salinity [PSU]
# name 18 = sbeox1ML/L: Oxygen, SBE 43, 2 [ml/l], WS = 2
# name 19 = sal11: Salinity, 2 [PSU]
# name 20 = depSM: Depth [salt water, m], lat = 35.3357
# name 21 = flag: flag
# span 0 = 2.000, 3638.000
# span 1 = 13.8108, 27.0088
# span 2 = 13.8108, 27.0112
# span 3 = 38.7345, 97.3056
# span 4 = 38.7987, 97.2901
# span 5 = 4.640047, 11.543013
# span 6 = 4.645992, 11.574247
# span 7 = 0.5036, 3.3284
# span 8 = -23.97469, 5.90225
# span 9 = -3.8414, 98.8069
# span 10 = 1025.7462, 1089.5758
# span 11 = -0.0330, 1.0039
# span 12 = 0.0494042, 2.0979324
# span 13 = 5.97, 99.63
# span 14 = 0.5409, 3.0223
# span 15 = -41.88372, 5.70259
# span 16 = -58.50867, 5.88089
# span 17 = 38.7345, 97.3128
# span 18 = -46.32159, 5.69958
# span 19 = 38.7987, 97.2938
# span 20 = 1.985, 3580.853
# span 21 = 0.0000e+00, 0.0000e+00
# interval = decibars: 1
# start_time = Aug 03 2009 22:29:34
# bad_flag = -9.990e-29
# sensor 0 = Frequency 0 temperature, primary, 4303, 2008-09-25
# sensor 1 = Frequency 1 conductivity, primary, 2707, 2008-09-24, cpcor = -9.5700e-08
# sensor 2 = Frequency 2 pressure, 69685, 12/18/2002
# sensor 3 = Frequency 3 temperature, secondary, 4312, 2008-09-23
# sensor 4 = Frequency 4 conductivity, secondary, 2768, 2008-09-25, cpcor = -9.5700e-08
# sensor 5 = Extrnl Volt 0 WET Labs, ECO_AFL
# sensor 6 = Extrnl Volt 1 userpoly 0, FLNTURTD-1013, 2008-04-18
# sensor 7 = Extrnl Volt 2 transmissometer, primary, CST-1117DR, 2008-04-30
# sensor 8 = Extrnl Volt 4 altimeter
# sensor 9 = Extrnl Volt 5 Oxygen, SBE, primary, 0794, 2009-03-13
# sensor 10 = Extrnl Volt 6 userpoly 1, Flashbird-5
# sensor 11 = Extrnl Volt 7 Oxygen, SBE, secondary, 0072, 2009-05-13
# sensor 12 = Extrnl Volt 9 surface irradiance (SPAR), degrees = 0.0
# datcnv_date = Aug 04 2009 00:03:54, 7.15
# datcnv_in = c:ctd_processingoc454-20011.hex c:ctd_processingoc454-20011.CON
# datcnv_skipover = 0
# wildedit_date = Aug 04 2009 00:04:07, 7.15
# wildedit_in = c:ctd_processingoc454-20011.cnv
# wildedit_pass1_nstd = 2.0
# wildedit_pass2_nstd = 20.0
# wildedit_pass2_mindelta = 1.000e+000
# wildedit_npoint = 100
# wildedit_vars = prDM t090C t190C sal00 sal11 c0S/m c1S/m sbeox0V sbeox0ML/L xmiss density00 flECO-AFL upoly0 altM sbeox1V sbeox1ML/L
# wildedit_excl_bad_scans = yes
# filter_date = Aug 04 2009 00:04:23, 7.15
# filter_in = c:ctd_processingoc454-20011.cnv
# filter_low_pass_tc_A = 0.030
# filter_low_pass_tc_B = 0.100
# filter_low_pass_A_vars = sal00 sal11 c0S/m c1S/m sbeox0V sbeox0ML/L xmiss density00 flECO-AFL upoly0 sbeox1V sbeox1ML/L
# filter_low_pass_B_vars = prDM
# alignctd_date = Aug 04 2009 00:04:53, 7.15
# alignctd_in = c:ctd_processingoc454-20011.cnv
# alignctd_adv = sbeox0V 4.000, sbeox0ML/L 4.000
# celltm_date = Aug 04 2009 00:05:09, 7.15
# celltm_in = c:ctd_processingoc454-20011.cnv
# celltm_alpha = 0.0300, 0.0300
# celltm_tau = 7.0000, 7.0000
# celltm_temp_sensor_use_for_cond = primary, secondary
# loopedit_date = Aug 04 2009 00:05:25, 7.15
# loopedit_in = c:ctd_processingoc454-20011.cnv
# loopedit_minVelocity = 0.100
# loopedit_surfaceSoak: do not remove
# loopedit_excl_bad_scans = yes
# Derive_date = Aug 04 2009 00:05:47, 7.15
# Derive_in = c:ctd_processingoc454-20011.cnv c:ctd_processingoc454-20011.CON
# derive_time_window_docdt = seconds: 2
# binavg_date = Aug 04 2009 00:06:08, 7.15
# binavg_in = c:ctd_processingoc454-20011.cnv
# binavg_bintype = decibars
# binavg_binsize = 1
# binavg_excl_bad_scans = yes
# binavg_skipover = 0
# binavg_surface_bin = no, min = 0.000, max = 0.000, value = 0.000
# file_type = ascii
*END*
</pre>
Specified by the Principal Investigator(s)
<p>No post-cruise processing was done and there are no plans to do any futher processing of these data.</p>
Specified by the Principal Investigator(s)
asNeeded
7.x-1.1
Biological and Chemical Oceanography Data Management Office (BCO-DMO)
Unavailable
508-289-2009
WHOI MS#36
Woods Hole
MA
02543
USA
info@bco-dmo.org
http://www.bco-dmo.org
Monday - Friday 8:00am - 5:00pm
For questions regarding this resource, please contact BCO-DMO via the email address provided.
pointOfContact
CTD Sea-Bird SBE 911plus
CTD Sea-Bird SBE 911plus
PI Supplied Instrument Name: CTD Sea-Bird SBE 911plus Instrument Name: CTD Sea-Bird SBE 911plus Instrument Short Name:CTD SBE 911plus Instrument Description: The Sea-Bird SBE 911 plus is a type of CTD instrument package for continuous measurement of conductivity, temperature and pressure. The SBE 911 plus includes the SBE 9plus Underwater Unit and the SBE 11plus Deck Unit (for real-time readout using conductive wire) for deployment from a vessel. The combination of the SBE 9 plus and SBE 11 plus is called a SBE 911 plus. The SBE 9 plus uses Sea-Bird's standard modular temperature and conductivity sensors (SBE 3 plus and SBE 4). The SBE 9 plus CTD can be configured with up to eight auxiliary sensors to measure other parameters including dissolved oxygen, pH, turbidity, fluorescence, light (PAR), light transmission, etc.). more information from Sea-Bird Electronics Community Standard Description: http://vocab.nerc.ac.uk/collection/L22/current/TOOL0058/
SBE 43 Dissolved Oxygen Sensor
SBE 43 Dissolved Oxygen Sensor
PI Supplied Instrument Name: SBE 43 Dissolved Oxygen Sensor PI Supplied Instrument Description:Oxygen, SBE, primary, 0794, 2009-03-13 Instrument Name: Sea-Bird SBE 43 Dissolved Oxygen Sensor Instrument Short Name:SBE-43 DO Instrument Description: The Sea-Bird SBE 43 dissolved oxygen sensor is a redesign of the Clark polarographic membrane type of dissolved oxygen sensors. more information from Sea-Bird Electronics Community Standard Description: http://vocab.nerc.ac.uk/collection/L22/current/TOOL0036/
Transmissometer
Transmissometer
PI Supplied Instrument Name: Transmissometer PI Supplied Instrument Description:primary, CST-1117DR, 2008-04-30 Instrument Name: Transmissometer Instrument Short Name:Transmissometer Instrument Description: A transmissometer measures the beam attenuation coefficient of the lightsource over the instrument's path-length. This instrument designation is used when specific manufacturer, make and model are not known. Community Standard Description: http://vocab.nerc.ac.uk/collection/L05/current/124/
Wet Labs ECO-AFL/FL Fluorometer
Wet Labs ECO-AFL/FL Fluorometer
PI Supplied Instrument Name: Wet Labs ECO-AFL/FL Fluorometer Instrument Name: Wet Labs ECO-AFL/FL Fluorometer Instrument Short Name:ECO AFL/FL Instrument Description: The Environmental Characterization Optics (ECO) series of single channel fluorometers delivers both high resolution and wide ranges across the entire line of parameters using 14 bit digital processing. The ECO series excels in biological monitoring and dye trace studies. The potted optics block results in long term stability of the instrument and the optional anti-biofouling technology delivers truly long term field measurements.
more information from Wet Labs Community Standard Description: http://vocab.nerc.ac.uk/collection/L22/current/TOOL0172/
WetLabs FLNTU
WetLabs FLNTU
PI Supplied Instrument Name: WetLabs FLNTU PI Supplied Instrument Description:FLNTURTD-1013, 2008-04-18 Instrument Name: WetLabs FLNTU Instrument Short Name:FLNTU Instrument Description: The WetLabs ECO FLNTU is a dual-wavelength, single-angle sensor for simultaneously determining both chlorophyll fluorescence and turbidity. It detects light scattered by particles suspended in water, generating an output voltage proportional to turbidity or suspended solids. Scaling factors are used to convert the voltage readings to values representing chlorophyll concentration and turbidity expressed in Nephelometric Turbidity Units (NTUs). Community Standard Description: http://vocab.nerc.ac.uk/collection/L05/current/113/
Cruise: OC454-02
OC454-02
R/V Oceanus
Community Standard Description
International Council for the Exploration of the Sea
R/V Oceanus
vessel
OC454-02
Virginia P. Edgcomb
Woods Hole Oceanographic Institution
http://data.bco-dmo.org/Protists_2009/OC454-02_cruise_report.pdf
Report describing OC454-02
R/V Oceanus
Community Standard Description
International Council for the Exploration of the Sea
R/V Oceanus
vessel