http://lod.bco-dmo.org/id/dataset/3475
eng; USA
utf8
dataset
Highest level of data collection, from a common set of sensors or instrumentation, usually within the same research project
Biological and Chemical Oceanography Data Management Office (BCO-DMO)
Unavailable
508-289-2009
WHOI MS#36
Woods Hole
MA
02543
USA
info@bco-dmo.org
http://www.bco-dmo.org
Monday - Friday 8:00am - 5:00pm
For questions regarding this resource, please contact BCO-DMO via the email address provided.
pointOfContact
2011-05-09
ISO 19115-2 Geographic Information - Metadata - Part 2: Extensions for Imagery and Gridded Data
ISO 19115-2:2009(E)
Downcast profiles from Seacat CTD on MacLane pump from R/V Oceanus OC449-02 and OC449-03 in the Eastern North Atlantic and Indian oceans in 2008 (SIRENA project)
2011-05-09
publication
2011-05-09
revision
BCO-DMO Linked Data URI
2011-05-09
creation
http://lod.bco-dmo.org/id/dataset/3475
Phoebe J. Lam
Woods Hole Oceanographic Institution
principalInvestigator
Biological and Chemical Oceanography Data Management Office (BCO-DMO)
Unavailable
508-289-2009
WHOI MS#36
Woods Hole
MA
02543
USA
info@bco-dmo.org
http://www.bco-dmo.org
Monday - Friday 8:00am - 5:00pm
For questions regarding this resource, please contact BCO-DMO via the email address provided.
publisher
Cite this dataset as: Lam, P. J. (2011) Downcast profiles from Seacat CTD on MacLane pump from R/V Oceanus OC449-02 and OC449-03 in the Eastern North Atlantic and Indian oceans in 2008 (SIRENA project). Biological and Chemical Oceanography Data Management Office (BCO-DMO). (Version 09 May 2011) Version Date 2011-05-09 [if applicable, indicate subset used]. http://lod.bco-dmo.org/id/dataset/3475 [access date]
CTD - Pump Seacat CTD - Down Casts Dataset Description: <p>CTD data from Lam SBE19plus (Seacat) attached to end of the MacLane pump line - <b>Down&nbsp; Casts</b><br />
<b>Note: </b>These data not collected on R/V Islandia ISL0109 cruise<br />
<br />
<b>PI's Note/09May2011:</b><br />
In comparing my pump seacat CTD to the ship's CTD, I've discovered that the ship's CTD's fluorescence and beam attenuation are no good, at least for OC449-3. The ship's fluorometer was clearly just not working. &nbsp;The ship's transmissometer misbehaved in a more subtle manner--oceanographically consistent, but of a different pattern than my pump seacat data. &nbsp;I concluded that my pump seacat CTD's transmissometer is the &quot;correct&quot; one by comparing to discrete particulate carbon measurements on particles collected on my pumps. &nbsp;Both particulate carbon concentrations and beam attenuation from my pump seacat CTD show a minimum at 500m at OC449-3 station 3, whereas the ship's CTD shows an anomalous minimum in subsurface beam attenuation at station 2, which is not seem in the particulate carbon concentrations.</p> Methods and Sampling: <p>The CTD was allowed to debubble briefly just below the surface before paying out wire, but this was often insufficient to get out all bubbles, so upper ~15m of the downcasts are generally not good.<br />
<br />
The transmissometer windows were wiped clean with distilled water before and after each cast, and kept capped in between deployments. The voltage of the transmissometer in air (Vair) and in the dark (Vdark) were read after each deployment to monitor drift, though beam attenuation reported here do not yet take shipboard baseline measurements into account, and use the calibrations of the transmissometer from the beginning of OC449-2 cruise.<br />
<br />
See: VIII. Protocols for Optics: Transmissometer and Scattering Sensors&amp;rdquoSampling and Sample-handling Protocols for GEOTRACES Cruises, Edited by the 2010 GEOTRACES Standards and Intercalibration Committee.</p>
Funding provided by NSF Division of Ocean Sciences (NSF OCE) Award Number: OCE-0726367 Award URL: https://www.nsf.gov/awardsearch/show-award?AWD_ID=0726367
onGoing
Phoebe J. Lam
Woods Hole Oceanographic Institution
831-459-4587
1156 High St. Department of Ocean Sciences
Santa Cruz
CA
95064
USA
pjlam@ucsc.edu
pointOfContact
asNeeded
Dataset Version: 09 May 2011
Unknown
cruise_id
station
cast
CTD_DataSet_Id
date
time
lat
lon
sampled_for
depth_station
Temperature
Conductivity
Pressure
Oxygen
Bat
Fluor
Upoly0
V1
OxygenV
Salinity
Density
Depth
PoTemp
Oxygen_Sat
flag
CTD Sea-Bird SEACAT
theme
None, User defined
Cruise identfier
station
cast
dataset_id
date
time of day
latitude
longitude
sample description
depth
water temperature at measurement depth
conductivity
water pressure
dissolved Oxygen
beam attenuation
fluorescence
turbidity
No BCO-DMO term
Oxygen in volts
salinity
density
potential temperature
O2 saturation
flag
featureType
BCO-DMO Standard Parameters
CTD Sea-Bird SEACAT
instrument
BCO-DMO Standard Instruments
OC449-02
OC449-03
service
Deployment Activity
Trans atlantic transect between Barbados and Cape Verde, 5-20 degN, 20-58 degW
Coastal transect between Cape Verde and Mauritanian coast, 17N/24.5W to 20N/17.3W
place
Locations
otherRestrictions
otherRestrictions
Access Constraints: none. Use Constraints: Please follow guidelines at: http://www.bco-dmo.org/terms-use Distribution liability: Under no circumstances shall BCO-DMO be liable for any direct, incidental, special, consequential, indirect, or punitive damages that result from the use of, or the inability to use, the materials in this data submission. If you are dissatisfied with any materials in this data submission your sole and exclusive remedy is to discontinue use.
Ocean Carbon and Biogeochemistry
http://us-ocb.org/
Ocean Carbon and Biogeochemistry
The Ocean Carbon and Biogeochemistry (OCB) program focuses on the ocean's role as a component of the global Earth system, bringing together research in geochemistry, ocean physics, and ecology that inform on and advance our understanding of ocean biogeochemistry. The overall program goals are to promote, plan, and coordinate collaborative, multidisciplinary research opportunities within the U.S. research community and with international partners. Important OCB-related activities currently include: the Ocean Carbon and Climate Change (OCCC) and the North American Carbon Program (NACP); U.S. contributions to IMBER, SOLAS, CARBOOCEAN; and numerous U.S. single-investigator and medium-size research projects funded by U.S. federal agencies including NASA, NOAA, and NSF.
The scientific mission of OCB is to study the evolving role of the ocean in the global carbon cycle, in the face of environmental variability and change through studies of marine biogeochemical cycles and associated ecosystems.
The overarching OCB science themes include improved understanding and prediction of: 1) oceanic uptake and release of atmospheric CO2 and other greenhouse gases and 2) environmental sensitivities of biogeochemical cycles, marine ecosystems, and interactions between the two.
The OCB Research Priorities (updated January 2012) include: ocean acidification; terrestrial/coastal carbon fluxes and exchanges; climate sensitivities of and change in ecosystem structure and associated impacts on biogeochemical cycles; mesopelagic ecological and biogeochemical interactions; benthic-pelagic feedbacks on biogeochemical cycles; ocean carbon uptake and storage; and expanding low-oxygen conditions in the coastal and open oceans.
OCB
largerWorkCitation
program
Sources of Iron to the EasterN tropical Atlantic
http://www.whoi.edu/sbl/liteSite.do?litesiteid=24492
Sources of Iron to the EasterN tropical Atlantic
<p>We will test the hypothesis that the continental margin of northwest Africa provides a significant subsurface supply of iron to the open eastern tropical Atlantic that supplements dust.</p>
<p>We will test our continental margin hypothesis with a wintertime visit to the new Tropical Eastern North Atlantic Time-Series Observatory (TENATSO) near Cape Verde, located in the eastern tropical Atlantic about 850 km downstream of Mauritanian coastal upwelling, and a summertime cross-shelf transect from the Mauritanian coast to TENATSO with Ed Boyle, who is already funded to study iron in the tropical Atlantic. Our cross-shelf transect will closely examine the potential lateral source of Fe, and evaluate it against an atmospheric source of Fe. Our proposal takes advantage of a novel combination of measurements to uniquely determine the importance of lateral transport vs. dust inputs and subsurface remineralization as Fe sources to the surface ocean. These measurements include:</p>
<p>1) synchrotron x-ray analysis of particulate iron "hotspots": micron-size particles of iron detected with a synchrotron x-ray fluorescence microprobe have been previously shown to exhibit maxima at depths of continental margin input in two ocean basins. Further, the Ti:Fe ratios and the mineralogy of these particles of iron can distinguish dust-derived vs. continental margin iron. This is a qualitative tracer for a dust vs continental margin source of Fe.</p>
<p>2) radium isotopes: the major source of 228Ra into the study area is by diffusion from 232Th-bearing near shore and continental shelf sediments. An open-ocean to coastal transect of 228Ra activities will allow us to determine horizontal mass transfer. 228Ra will be used to quantify the lateral flux of iron from the shelf.</p>
<p>3) 234Th profiles: high vertical resolution 234Th profiles can be used to determine the depth of particle remineralization. This will be used to determine whether or not putative subsurface Fe maxima are from remineralization of Fe-bearing particles.</p>
<p>TENATSO (Tropical Eastern North Atlantic Time-Series Observatory) time series station<br />
16°N, 24°W, North-east of Mindelo, Sao Vicente, Cape Verde</p>
<p><a href="http://tenatso.ifm-geomar.de/" target="_blank">TENATSO Home</a><br />
<a href="http://cafethorium.whoi.edu/website/projects/tenatso.html" target="_blank"><br />
</a> <a href="http://cafethorium.whoi.edu/website/projects/tenatso.html" target="_blank">TENATSO/SIRENA at Cafe Thorium/WHOI</a></p>
SIRENA
largerWorkCitation
project
eng; USA
oceans
Trans atlantic transect between Barbados and Cape Verde, 5-20 degN, 20-58 degW; Coastal transect between Cape Verde and Mauritanian coast, 17N/24.5W to 20N/17.3W
2011-05-09
Tropical North Atlantic, focusing on a Cape Verde to Mauritanian Coast transect
0
BCO-DMO catalogue of parameters from Downcast profiles from Seacat CTD on MacLane pump from R/V Oceanus OC449-02 and OC449-03 in the Eastern North Atlantic and Indian oceans in 2008 (SIRENA project)
Biological and Chemical Oceanography Data Management Office (BCO-DMO)
Unavailable
508-289-2009
WHOI MS#36
Woods Hole
MA
02543
USA
info@bco-dmo.org
http://www.bco-dmo.org
Monday - Friday 8:00am - 5:00pm
For questions regarding this resource, please contact BCO-DMO via the email address provided.
pointOfContact
http://lod.bco-dmo.org/id/dataset-parameter/24252.rdf
Name: cruise_id
Units: text
Description: <p>SIRENA Cruise Id</p>
http://lod.bco-dmo.org/id/dataset-parameter/24253.rdf
Name: station
Units: integer
Description: <p>Station Number</p>
http://lod.bco-dmo.org/id/dataset-parameter/24254.rdf
Name: cast
Units: integer
Description: <p>Cast Number</p>
http://lod.bco-dmo.org/id/dataset-parameter/24255.rdf
Name: CTD_DataSet_Id
Units: text
Description: <p>CTD Dataset Id</p>
http://lod.bco-dmo.org/id/dataset-parameter/24256.rdf
Name: date
Units: YYYYMMDD
Description: <p>Station date</p>
http://lod.bco-dmo.org/id/dataset-parameter/24257.rdf
Name: time
Units: HHMMSS
Description: <p>Station time </p>
http://lod.bco-dmo.org/id/dataset-parameter/24258.rdf
Name: lat
Units: decimal degrees
Description: <p>Station latitude (South is negative)</p>
http://lod.bco-dmo.org/id/dataset-parameter/24259.rdf
Name: lon
Units: decimal degrees
Description: <p>Station longitude (West is negative)</p>
http://lod.bco-dmo.org/id/dataset-parameter/24260.rdf
Name: sampled_for
Units: text
Description: <p>Sampling</p>
http://lod.bco-dmo.org/id/dataset-parameter/24261.rdf
Name: depth_station
Units: meters
Description: <p>Station Depth</p>
http://lod.bco-dmo.org/id/dataset-parameter/24262.rdf
Name: Temperature
Units: degrees celsius
Description: <p>tv290C: Temperature ITS-90</p>
http://lod.bco-dmo.org/id/dataset-parameter/24263.rdf
Name: Conductivity
Units: S/m
Description: <p>c0S/m: Conductivity</p>
http://lod.bco-dmo.org/id/dataset-parameter/24264.rdf
Name: Pressure
Units: decibars
Description: <p>prdM: Pressure Strain Gauge</p>
http://lod.bco-dmo.org/id/dataset-parameter/24265.rdf
Name: Oxygen
Units: umol/Kg
Description: <p>sbeox0Mm/Kg: Oxygen; SBE 43</p>
http://lod.bco-dmo.org/id/dataset-parameter/24266.rdf
Name: Bat
Units: 1/m
Description: <p>bat: Beam Attenuation Chelsea/Seatech/Wetlab CStar</p>
http://lod.bco-dmo.org/id/dataset-parameter/24267.rdf
Name: Fluor
Units: mg/m^3
Description: <p> FlECO-AFL: Fluorescence Wetlab ECO-AFL/FL</p>
http://lod.bco-dmo.org/id/dataset-parameter/24268.rdf
Name: Upoly0
Units: NTU(??)
Description: <p>upoly0: Upoly 0 Turbidity Meter</p>
http://lod.bco-dmo.org/id/dataset-parameter/24269.rdf
Name: V1
Units: volts
Description: <p> v1: Voltage 1</p>
http://lod.bco-dmo.org/id/dataset-parameter/24270.rdf
Name: OxygenV
Units: volts
Description: <p>sbeox0V: Oxygen Voltage SBE 43</p>
http://lod.bco-dmo.org/id/dataset-parameter/24271.rdf
Name: Salinity
Units: PSU
Description: <p>sal00: Salinity</p>
http://lod.bco-dmo.org/id/dataset-parameter/24272.rdf
Name: Density
Units: Kg/m^3
Description: <p>sigma-é00: Density sigma-theta</p>
http://lod.bco-dmo.org/id/dataset-parameter/24273.rdf
Name: Depth
Units: meters
Description: <p>depSM: Depth salt water lat=12</p>
http://lod.bco-dmo.org/id/dataset-parameter/24274.rdf
Name: PoTemp
Units: degrees celsius
Description: <p>potemp090C: Potential Temperature ITS-90</p>
http://lod.bco-dmo.org/id/dataset-parameter/24275.rdf
Name: Oxygen_Sat
Units: ml/l
Description: <p>oxsatML/L: Oxygen Saturation</p>
http://lod.bco-dmo.org/id/dataset-parameter/24276.rdf
Name: flag
Units: nd
Description: <p>flag</p>
GB/NERC/BODC > British Oceanographic Data Centre, Natural Environment Research Council, United Kingdom
Biological and Chemical Oceanography Data Management Office (BCO-DMO)
Unavailable
508-289-2009
WHOI MS#36
Woods Hole
MA
02543
USA
info@bco-dmo.org
http://www.bco-dmo.org
Monday - Friday 8:00am - 5:00pm
For questions regarding this resource, please contact BCO-DMO via the email address provided.
pointOfContact
1237422
https://datadocs.bco-dmo.org/file/p99nD3Gu9B3zWj/CTD_Pumps_Dn.csv
CTD_Pumps_Dn.csv
Primary data file for dataset ID 3475
download
https://osprey.bco-dmo.org/dataset/3475/data/download
download
onLine
dataset
<p>The CTD was allowed to debubble briefly just below the surface before paying out wire, but this was often insufficient to get out all bubbles, so upper ~15m of the downcasts are generally not good.<br />
<br />
The transmissometer windows were wiped clean with distilled water before and after each cast, and kept capped in between deployments. The voltage of the transmissometer in air (Vair) and in the dark (Vdark) were read after each deployment to monitor drift, though beam attenuation reported here do not yet take shipboard baseline measurements into account, and use the calibrations of the transmissometer from the beginning of OC449-2 cruise.<br />
<br />
See: VIII. Protocols for Optics: Transmissometer and Scattering Sensors&amp;rdquoSampling and Sample-handling Protocols for GEOTRACES Cruises, Edited by the 2010 GEOTRACES Standards and Intercalibration Committee.</p>
from Cruise: OC449-02 <p>* Sea-Bird SBE19plus Data File: <br />
* FileName = C:dataSIRENAseacat awhexfiles20080809_stn3_d1.hex <br />
* Software Version 1.59 <br />
* Temperature SN = 5236 <br />
* Conductivity SN = 5236 <br />
* System UpLoad Time = Aug 10 2008 14:20:50 <br />
** KN192-05 SeacatSIRENA OC449-2 Seacat <br />
** Nov-Dec 2007 GMTAugust 2008 <br />
** TMCR or McLane DeploymentMcLane Deployments <br />
** Lat Long16N28.712, 52W21.563 <br />
** Station 3, McLane Deploy 1 to 740m <br />
* ds <br />
* SeacatPlus V 1.6b SERIAL NO. 5236 10 Aug 2008 18:17:09 <br />
* vbatt = 11.1, vlith = 8.8, ioper = 61.6 ma, ipump = 40.3 ma, <br />
* iext01 = 42.8 ma <br />
* iext23 = 50.6 ma <br />
* <br />
* status = not logging <br />
* number of scans to average = 1 <br />
* samples = 79872, free = 361633, casts = 1 <br />
* mode = profile, minimum cond freq = 3046, pump delay = 60 sec <br />
* autorun = no, ignore magnetic switch = no <br />
* battery type = alkaline, battery cutoff = 7.3 volts <br />
* pressure sensor = strain gauge, range = 10000.0 <br />
* SBE 38 = no, Gas Tension Device = no <br />
* Ext Volt 0 = yes, Ext Volt 1 = yes, Ext Volt 2 = yes, Ext Volt 3 = yes <br />
* echo commands = yes <br />
* output format = raw HEX <br />
* append UCSD sigma-t, V <br />
* S> <br />
* <br />
* SeacatPlus V 1.6b SERIAL NO. 5236 10 Aug 2008 18:17:23 <br />
* temperature: 10-oct-07 <br />
* TA0 = 1.233097e-03 <br />
* TA1 = 2.599901e-04 <br />
* TA2 = -6.217010e-08 <br />
* TA3 = 1.424099e-07 <br />
* TOFFSET = 0.000000e+00 <br />
* conductivity: 10-oct-07 <br />
* G = -1.011156e+00 <br />
* H = 1.570412e-01 <br />
* I = -5.888161e-04 <br />
* J = 6.994908e-05 <br />
* CF0 = 2.546154e+03 <br />
* CPCOR = -9.570000e-08 <br />
* CTCOR = 3.250000e-06 <br />
* CSLOPE = 1.000000e+00 <br />
* pressure S/N = 227881, range = 10000 psia: 04-oct-07 <br />
* PA0 = 1.049048e+01 <br />
* PA1 = 1.113019e-01 <br />
* PA2 = -1.291358e-09 <br />
* PTCA0 = 5.244870e+05 <br />
* PTCA1 = 4.940270e+00 <br />
* PTCA2 = 4.455964e-03 <br />
* PTCB0 = 2.759300e+01 <br />
* PTCB1 = 3.766667e-03 <br />
* PTCB2 = 0.000000e+00 <br />
* PTEMPA0 = 5.933266e+01 <br />
* PTEMPA1 = -5.963576e+01 <br />
* PTEMPA2 = 1.426064e+01 <br />
* POFFSET = 0.000000e+00 <br />
* volt 0: offset = -4.723474e-02, slope = 1.247667e+00 <br />
* volt 1: offset = -4.757158e-02, slope = 1.247768e+00 <br />
* volt 2: offset = -4.668316e-02, slope = 1.246813e+00 <br />
* volt 3: offset = -4.697684e-02, slope = 1.247485e+00 <br />
* EXTFREQSF = 1.000012e+00 <br />
* dh <br />
* cast 1 09 Aug 2008 16:14:04 samples 1 to 79872, avg = 1, stop = mag switch <br />
* S> <br />
# nquan = 15 <br />
# nvalues = 760 <br />
# units = specified <br />
# name 0 = tv290C: Temperature [ITS-90, deg C] <br />
# name 1 = c0S/m: Conductivity [S/m] <br />
# name 2 = prdM: Pressure, Strain Gauge [db] <br />
# name 3 = sbeox0Mm/Kg: Oxygen, SBE 43 [umol/Kg] <br />
# name 4 = bat: Beam Attenuation, Chelsea/Seatech/Wetlab CStar [1/m] <br />
# name 5 = flECO-AFL: Fluorescence, Wetlab ECO-AFL/FL [mg/m^3] <br />
# name 6 = upoly0: Upoly 0, Turbidity Meter <br />
# name 7 = v1: Voltage 1 <br />
# name 8 = sbeox0V: Oxygen Voltage, SBE 43 <br />
# name 9 = sal00: Salinity [PSU] <br />
# name 10 = sigma-é00: Density [sigma-theta, Kg/m^3] <br />
# name 11 = depSM: Depth [salt water, m], lat = 12 <br />
# name 12 = potemp090C: Potential Temperature [ITS-90, deg C] <br />
# name 13 = oxsatML/L: Oxygen Saturation [ml/l] <br />
# name 14 = flag: flag <br />
# span 0 = 6.3620, 29.2534 <br />
# span 1 = 1.230963, 5.842750 <br />
# span 2 = 1.006, 765.785 <br />
# span 3 = 106.811, 215.696 <br />
# span 4 = -0.0179, 4.9453 <br />
# span 5 = -0.1484, 15.6959 <br />
# span 6 = 0.0114213, 4.6879689 <br />
# span 7 = 1.9703, 4.8128 <br />
# span 8 = 1.3021, 2.6530 <br />
# span 9 = 7.4903, 37.2916 <br />
# span 10 = 1.4659, 27.3130 <br />
# span 11 = 1.000, 760.000 <br />
# span 12 = 6.2928, 29.2531 <br />
# span 13 = 4.44782, 6.87465 <br />
# span 14 = 0.0000e+00, 0.0000e+00 <br />
# interval = meters: 1 <br />
# start_time = Aug 09 2008 16:14:04 <br />
# bad_flag = -9.990e-29 <br />
# sensor 0 = Frequency 0 temperature, 5236, 10-OCT-07 <br />
# sensor 1 = Frequency 1 conductivity, 5236, 10-OCT-07, cpcor = -9.5700e-08 <br />
# sensor 2 = Pressure Number <br />
# sensor 3 = Extrnl Volt 0 Oxygen, SBE, primary, 1336, 02-Oct-07 <br />
# sensor 4 = Extrnl Volt 1 transmissometer, primary, CST-1070DR, 9-Aug-08 <br />
# sensor 5 = Extrnl Volt 2 WET Labs, ECO_AFL <br />
# sensor 6 = Extrnl Volt 3 userpoly 0, FLNTURTD-870, 9-OCT-2007 <br />
# datcnv_date = Sep 01 2008 16:47:14, 7.14e <br />
# datcnv_in = c:dataSIRENAseacat awhexfiles20080809_stn3_d1.hex C:dataSIRENAseacatprocessed20080901OC449-2SIRENA.con <br />
# datcnv_skipover = 500 <br />
# alignctd_date = Sep 01 2008 16:47:21, 7.14e <br />
# alignctd_in = c:dataSIRENAseacatprocessed20080809_stn3_d1.cnv <br />
# alignctd_adv = tv290C 0.500, c0S/m -0.100, sbeox0Mm/Kg 4.000 <br />
# celltm_date = Sep 01 2008 16:47:22, 7.14e <br />
# celltm_in = c:dataSIRENAseacatprocessed20080809_stn3_d1.cnv <br />
# celltm_alpha = 0.0400, 0.0000 <br />
# celltm_tau = 8.0000, 0.0000 <br />
# celltm_temp_sensor_use_for_cond = primary, <br />
# Derive_date = Sep 01 2008 16:47:23, 7.14e <br />
# Derive_in = c:dataSIRENAseacatprocessed20080809_stn3_d1.cnv C:dataSIRENAseacatprocessed20080901OC449-2SIRENA.con <br />
# binavg_date = Sep 01 2008 16:47:34, 7.14e <br />
# binavg_in = c:dataSIRENAseacatprocessed20080809_stn3_d1.cnv <br />
# binavg_bintype = meters <br />
# binavg_binsize = 1 <br />
# binavg_excl_bad_scans = no <br />
# binavg_skipover = 0 <br />
# binavg_surface_bin = yes, min = 0.000, max = 0.000, value = 0.000 <br />
# split_date = Sep 01 2008 16:47:49, 7.14e <br />
# split_in = c:dataSIRENAseacatprocessed20080809_stn3_d1bin1m.cnv <br />
# split_excl_bad_scans = yes <br />
# file_type = ascii <br />
*END*</p>
from Cruise: OC449-03 <p>* Sea-Bird SBE19plus Data File: <br />
* FileName = C:dataSIRENAseacat awhexfiles20080809_stn3_d1.hex <br />
* Software Version 1.59 <br />
* Temperature SN = 5236 <br />
* Conductivity SN = 5236 <br />
* System UpLoad Time = Aug 10 2008 14:20:50 <br />
** KN192-05 SeacatSIRENA OC449-2 Seacat <br />
** Nov-Dec 2007 GMTAugust 2008 <br />
** TMCR or McLane DeploymentMcLane Deployments <br />
** Lat Long16N28.712, 52W21.563 <br />
** Station 3, McLane Deploy 1 to 740m <br />
* ds <br />
* SeacatPlus V 1.6b SERIAL NO. 5236 10 Aug 2008 18:17:09 <br />
* vbatt = 11.1, vlith = 8.8, ioper = 61.6 ma, ipump = 40.3 ma, <br />
* iext01 = 42.8 ma <br />
* iext23 = 50.6 ma <br />
* <br />
* status = not logging <br />
* number of scans to average = 1 <br />
* samples = 79872, free = 361633, casts = 1 <br />
* mode = profile, minimum cond freq = 3046, pump delay = 60 sec <br />
* autorun = no, ignore magnetic switch = no <br />
* battery type = alkaline, battery cutoff = 7.3 volts <br />
* pressure sensor = strain gauge, range = 10000.0 <br />
* SBE 38 = no, Gas Tension Device = no <br />
* Ext Volt 0 = yes, Ext Volt 1 = yes, Ext Volt 2 = yes, Ext Volt 3 = yes <br />
* echo commands = yes <br />
* output format = raw HEX <br />
* append UCSD sigma-t, V <br />
* S> <br />
* <br />
* SeacatPlus V 1.6b SERIAL NO. 5236 10 Aug 2008 18:17:23 <br />
* temperature: 10-oct-07 <br />
* TA0 = 1.233097e-03 <br />
* TA1 = 2.599901e-04 <br />
* TA2 = -6.217010e-08 <br />
* TA3 = 1.424099e-07 <br />
* TOFFSET = 0.000000e+00 <br />
* conductivity: 10-oct-07 <br />
* G = -1.011156e+00 <br />
* H = 1.570412e-01 <br />
* I = -5.888161e-04 <br />
* J = 6.994908e-05 <br />
* CF0 = 2.546154e+03 <br />
* CPCOR = -9.570000e-08 <br />
* CTCOR = 3.250000e-06 <br />
* CSLOPE = 1.000000e+00 <br />
* pressure S/N = 227881, range = 10000 psia: 04-oct-07 <br />
* PA0 = 1.049048e+01 <br />
* PA1 = 1.113019e-01 <br />
* PA2 = -1.291358e-09 <br />
* PTCA0 = 5.244870e+05 <br />
* PTCA1 = 4.940270e+00 <br />
* PTCA2 = 4.455964e-03 <br />
* PTCB0 = 2.759300e+01 <br />
* PTCB1 = 3.766667e-03 <br />
* PTCB2 = 0.000000e+00 <br />
* PTEMPA0 = 5.933266e+01 <br />
* PTEMPA1 = -5.963576e+01 <br />
* PTEMPA2 = 1.426064e+01 <br />
* POFFSET = 0.000000e+00 <br />
* volt 0: offset = -4.723474e-02, slope = 1.247667e+00 <br />
* volt 1: offset = -4.757158e-02, slope = 1.247768e+00 <br />
* volt 2: offset = -4.668316e-02, slope = 1.246813e+00 <br />
* volt 3: offset = -4.697684e-02, slope = 1.247485e+00 <br />
* EXTFREQSF = 1.000012e+00 <br />
* dh <br />
* cast 1 09 Aug 2008 16:14:04 samples 1 to 79872, avg = 1, stop = mag switch <br />
* S> <br />
# nquan = 15 <br />
# nvalues = 760 <br />
# units = specified <br />
# name 0 = tv290C: Temperature [ITS-90, deg C] <br />
# name 1 = c0S/m: Conductivity [S/m] <br />
# name 2 = prdM: Pressure, Strain Gauge [db] <br />
# name 3 = sbeox0Mm/Kg: Oxygen, SBE 43 [umol/Kg] <br />
# name 4 = bat: Beam Attenuation, Chelsea/Seatech/Wetlab CStar [1/m] <br />
# name 5 = flECO-AFL: Fluorescence, Wetlab ECO-AFL/FL [mg/m^3] <br />
# name 6 = upoly0: Upoly 0, Turbidity Meter <br />
# name 7 = v1: Voltage 1 <br />
# name 8 = sbeox0V: Oxygen Voltage, SBE 43 <br />
# name 9 = sal00: Salinity [PSU] <br />
# name 10 = sigma-é00: Density [sigma-theta, Kg/m^3] <br />
# name 11 = depSM: Depth [salt water, m], lat = 12 <br />
# name 12 = potemp090C: Potential Temperature [ITS-90, deg C] <br />
# name 13 = oxsatML/L: Oxygen Saturation [ml/l] <br />
# name 14 = flag: flag <br />
# span 0 = 6.3620, 29.2534 <br />
# span 1 = 1.230963, 5.842750 <br />
# span 2 = 1.006, 765.785 <br />
# span 3 = 106.811, 215.696 <br />
# span 4 = -0.0179, 4.9453 <br />
# span 5 = -0.1484, 15.6959 <br />
# span 6 = 0.0114213, 4.6879689 <br />
# span 7 = 1.9703, 4.8128 <br />
# span 8 = 1.3021, 2.6530 <br />
# span 9 = 7.4903, 37.2916 <br />
# span 10 = 1.4659, 27.3130 <br />
# span 11 = 1.000, 760.000 <br />
# span 12 = 6.2928, 29.2531 <br />
# span 13 = 4.44782, 6.87465 <br />
# span 14 = 0.0000e+00, 0.0000e+00 <br />
# interval = meters: 1 <br />
# start_time = Aug 09 2008 16:14:04 <br />
# bad_flag = -9.990e-29 <br />
# sensor 0 = Frequency 0 temperature, 5236, 10-OCT-07 <br />
# sensor 1 = Frequency 1 conductivity, 5236, 10-OCT-07, cpcor = -9.5700e-08 <br />
# sensor 2 = Pressure Number <br />
# sensor 3 = Extrnl Volt 0 Oxygen, SBE, primary, 1336, 02-Oct-07 <br />
# sensor 4 = Extrnl Volt 1 transmissometer, primary, CST-1070DR, 9-Aug-08 <br />
# sensor 5 = Extrnl Volt 2 WET Labs, ECO_AFL <br />
# sensor 6 = Extrnl Volt 3 userpoly 0, FLNTURTD-870, 9-OCT-2007 <br />
# datcnv_date = Sep 01 2008 16:47:14, 7.14e <br />
# datcnv_in = c:dataSIRENAseacat awhexfiles20080809_stn3_d1.hex C:dataSIRENAseacatprocessed20080901OC449-2SIRENA.con <br />
# datcnv_skipover = 500 <br />
# alignctd_date = Sep 01 2008 16:47:21, 7.14e <br />
# alignctd_in = c:dataSIRENAseacatprocessed20080809_stn3_d1.cnv <br />
# alignctd_adv = tv290C 0.500, c0S/m -0.100, sbeox0Mm/Kg 4.000 <br />
# celltm_date = Sep 01 2008 16:47:22, 7.14e <br />
# celltm_in = c:dataSIRENAseacatprocessed20080809_stn3_d1.cnv <br />
# celltm_alpha = 0.0400, 0.0000 <br />
# celltm_tau = 8.0000, 0.0000 <br />
# celltm_temp_sensor_use_for_cond = primary, <br />
# Derive_date = Sep 01 2008 16:47:23, 7.14e <br />
# Derive_in = c:dataSIRENAseacatprocessed20080809_stn3_d1.cnv C:dataSIRENAseacatprocessed20080901OC449-2SIRENA.con <br />
# binavg_date = Sep 01 2008 16:47:34, 7.14e <br />
# binavg_in = c:dataSIRENAseacatprocessed20080809_stn3_d1.cnv <br />
# binavg_bintype = meters <br />
# binavg_binsize = 1 <br />
# binavg_excl_bad_scans = no <br />
# binavg_skipover = 0 <br />
# binavg_surface_bin = yes, min = 0.000, max = 0.000, value = 0.000 <br />
# split_date = Sep 01 2008 16:47:49, 7.14e <br />
# split_in = c:dataSIRENAseacatprocessed20080809_stn3_d1bin1m.cnv <br />
# split_excl_bad_scans = yes <br />
# file_type = ascii <br />
*END*</p>
Specified by the Principal Investigator(s)
<p>SBE43 oxygen sensor was calibrated to 32 Winkler titrations conducted on first leg (OC449-2) by Taka Ito at stations 9,13,17,22.</br>
<br>
See: &ldquo;VIII. Protocols for Optics: Transmissometer and Scattering Sensors&rdquo; in the Sampling and Sample-handling Protocols for GEOTRACES Cruises, Edited by the 2010 GEOTRACES Standards and Intercalibration Committee.</p>
<p><b>BCO-DMO Processing Notes</b><br />
- Awk written to reformat original .cnv files contributed by Phoebe Lam<br />
- AWK: SIRENA_CTD_Pump_2_BCODMO.awk</p>
Specified by the Principal Investigator(s)
asNeeded
7.x-1.1
Biological and Chemical Oceanography Data Management Office (BCO-DMO)
Unavailable
508-289-2009
WHOI MS#36
Woods Hole
MA
02543
USA
info@bco-dmo.org
http://www.bco-dmo.org
Monday - Friday 8:00am - 5:00pm
For questions regarding this resource, please contact BCO-DMO via the email address provided.
pointOfContact
CTD Sea-Bird SEACAT
CTD Sea-Bird SEACAT
PI Supplied Instrument Name: CTD Sea-Bird SEACAT PI Supplied Instrument Description:* Sea-Bird SBE19plus Data File:
* FileName = C:dataSIRENAseacat awhexfiles20080809_stn3_d1.hex
* Software Version 1.59
* Temperature SN = 5236
* Conductivity SN = 5236
* System UpLoad Time = Aug 10 2008 14:20:50
** KN192-05 SeacatSIRENA OC449-2 Seacat
** Nov-Dec 2007 GMTAugust 2008
** TMCR or McLane DeploymentMcLane Deployments
Instrument Name: CTD Sea-Bird SEACAT Instrument Short Name:CTD SEACAT Instrument Description: The CTD SEACAT recorder is an instrument package manufactured by Sea-Bird Electronics. The first Sea-Bird SEACAT Recorder was the original SBE 16 SEACAT developed in 1987. There are several model numbers including the SBE 16plus (SEACAT C-T Recorder (P optional))and the SBE 19 (SBE 19plus SEACAT Profiler measures conductivity, temperature, and pressure (depth)). More information from Sea-Bird Electronics. Community Standard Description: http://vocab.nerc.ac.uk/collection/L05/current/350/
Cruise: OC449-02
OC449-02
R/V Oceanus
Community Standard Description
International Council for the Exploration of the Sea
R/V Oceanus
vessel
OC449-02
Edward A. Boyle
Massachusetts Institute of Technology
Cruise: OC449-03
OC449-03
R/V Oceanus
Community Standard Description
International Council for the Exploration of the Sea
R/V Oceanus
vessel
OC449-03
Phoebe J. Lam
Woods Hole Oceanographic Institution
R/V Oceanus
Community Standard Description
International Council for the Exploration of the Sea
R/V Oceanus
vessel