http://lod.bco-dmo.org/id/dataset/3624
eng; USA
utf8
dataset
Highest level of data collection, from a common set of sensors or instrumentation, usually within the same research project
Biological and Chemical Oceanography Data Management Office (BCO-DMO)
Unavailable
508-289-2009
WHOI MS#36
Woods Hole
MA
02543
USA
info@bco-dmo.org
http://www.bco-dmo.org
Monday - Friday 8:00am - 5:00pm
For questions regarding this resource, please contact BCO-DMO via the email address provided.
pointOfContact
2012-02-15
ISO 19115-2 Geographic Information - Metadata - Part 2: Extensions for Imagery and Gridded Data
ISO 19115-2:2009(E)
Surface and hydrocast Cesium isotopes 137 and 134 concentrations from the R/V Ka`imikai-O-Kanaloa KOK1108 cruise in June 2011 in the Northwest Pacific Ocean (Fukushima Radionuclide Levels project)
2012-12-17
publication
2012-12-17
revision
Marine Biological Laboratory/Woods Hole Oceanographic Institution Library (MBLWHOI DLA)
2019-05-20
publication
https://doi.org/10.1575/1912/bco-dmo.3624.2
Kenneth O. Buesseler
Woods Hole Oceanographic Institution
principalInvestigator
Biological and Chemical Oceanography Data Management Office (BCO-DMO)
Unavailable
508-289-2009
WHOI MS#36
Woods Hole
MA
02543
USA
info@bco-dmo.org
http://www.bco-dmo.org
Monday - Friday 8:00am - 5:00pm
For questions regarding this resource, please contact BCO-DMO via the email address provided.
publisher
Cite this dataset as: Buesseler, K. (2012) Cesium-134 and cesium-137 concentrations from hydrocasts done during R/V Ka'imikai-o-Kanaloa cruise KOK1108 off the coast of Japan, June 5-18, 2011 (Fukushima Radionuclide Levels project). Biological and Chemical Oceanography Data Management Office (BCO-DMO). (Version 17 December 2012) Version Date 2012-12-17 [if applicable, indicate subset used]. doi:10.1575/1912/5116 [access date]
137Cs and 134Cs concentrations from Fukushima Radionuclide Project Dataset Description: <p>Radionuclide results from surface and hydrocast bottle samples were determined from high purity germanium detectors and calibrated against IAEA standards as described in Buesseler et al. (PNAS, 2012).</p>
<p>Concentrations of Cesium isotopes 137Cs and 134Cs are reported in units of Bq (1 Becquerel = one disintegration per second) per unit volume (Bq/meter^3).</p>
<p><strong>Modification History:</strong><br />
Data version 2 (2012-12-17)&nbsp;replaced&nbsp;Data version 1 (2012-10).<br />
Note that updated Cesium data measurements were contributed by Ken Buesseler in October 2012.&nbsp; The online dataset has been revised to include these measurements.&nbsp; A PDF version of these updates is available (See supplemental file&nbsp;WHOI_KOK_Cs_data_Table_S1_Oct_2012_update.pdf).&nbsp;The data are in the same format as Table S1 in the 2012 Buesseler et al. PNAS paper cited below. The net difference in old vs. new is 0.3%, but a few values have changed&nbsp; by 5% or more. The update reflects a second run of the chemical yields measured for stable Cs by ICPMS.</p> Methods and Sampling: <p>Water samples were collected in Niskin bottles attached to a CTD Rosette.</p>
Funding provided by Gordon and Betty Moore Foundation (GBMF) Award Number: GBMF3007 Award URL: https://www.moore.org/grant-detail?grantId=GBMF3007
Funding provided by NSF Division of Ocean Sciences (NSF OCE) Award Number: OCE-1136693 Award URL: https://www.nsf.gov/awardsearch/show-award?AWD_ID=1136693
onGoing
Kenneth O. Buesseler
Woods Hole Oceanographic Institution
508-289-2309
266 Woods Hole Road MS #25
Woods Hole
MA
02543
USA
kbuesseler@whoi.edu
pointOfContact
asNeeded
Dataset Version: 2
Unknown
sta
cast
event
date
longitude
latitude
bot_Nis
time_local
press
depth
temp
potemp
sigma_0
sal_cal
O2_cal
sal_nis
O2_nis
Cs137
err_Cs137
Cs134
err_Cs134
Cs134_Cs137
err_Cs134_Cs137
WHOI_Cs_Code
time
date_local
CTD Sea-Bird 911
Niskin bottle
theme
None, User defined
station number
cast
event
date
longitude
latitude
Niskin bottle number
time_local
water pressure
depth
water temperature at measurement depth
potential temperature
sigma-theta
sal_cal
O2 calibrated
sal_nis
O2_nis
Cs137_tot
Cs137 standard error
Cs134_tot
Cs134 standard error
Cs134 to Cs137 ratio
Cs134 to Cs137 ratio stderr
WHOI_Cs_Code
time of day
date_local
featureType
BCO-DMO Standard Parameters
CTD Sea-Bird 911
Niskin bottle
instrument
BCO-DMO Standard Instruments
KOK1108
service
Deployment Activity
otherRestrictions
otherRestrictions
Access Constraints: none. Use Constraints: Please follow guidelines at: http://www.bco-dmo.org/terms-use Distribution liability: Under no circumstances shall BCO-DMO be liable for any direct, incidental, special, consequential, indirect, or punitive damages that result from the use of, or the inability to use, the materials in this data submission. If you are dissatisfied with any materials in this data submission your sole and exclusive remedy is to discontinue use.
Establishing Radionuclide Levels in the Atlantic and Pacific Oceans Originating from the Fukushima Daiichi Nuclear Power Facility
http://www.whoi.edu/page.do?pid=67796
Establishing Radionuclide Levels in the Atlantic and Pacific Oceans Originating from the Fukushima Daiichi Nuclear Power Facility
<p>The March 11, 2011 earthquake in Japan and the subsequent tsunami damaged and disrupted cooling systems at the Fukushima Daiichi nuclear power facility causing contamination of land and seas surrounding the site, as well as food supplies and drinking water. Small but measurable quantities of radioactivity have been detected in the atmosphere over the United States, including aerosol samples collected at the Woods Hole Oceanographic Institution, where I-131 was seen to increase to detectable levels as of March 21-22, 2011.</p>
<p>With major funding from the Moore Foundation, as well as a contribution from the National Science Foundation through a 2011 Grant for Rapid Response Research (RAPID) and support from the Woods Hole Oceanographic Institution, collaborating investigators from the United States, Japan, Spain, Monaco, and the United Kingdom were able to obtain samples off Japan for an early assessment of impacts.</p>
<p>From June 4 through June 19, 2011, a research cruise was carried out aboard the RV Kaimikai-O-Kanaloa, a research vessel operated by the University of Hawaii. During the cruise, hundreds of samples were collected in an area off the coast of Japan as close as 30 kilometers from the Fukushima Nuclear Power Plant and extending as far out as 600 kilometers off shore. The essential components of the program include: radionuclide measurements of water and particles; a radioecological study of biota, especially species at the base of the food chain and key fish species and a physical oceanographic study to characterize transport and water masses. A baseline radionuclide data set for the Atlantic and Pacific was obtained along an east to west network of sampling stations. Three hundred sampling events took place at thirty major stations for a total of more than 1500 samples. Along with 41 CTD stations, bottle samples of salinity, oxygen, radionuclides, and particulates were taken to depths of about 1000 meters. <a href="http://data.bco-dmo.org/Fukushima/Fukushima_radionuclide_sampling_summary.pdf">A list of the radionuclides sampled and a sampling summary map</a> is available. One hundred net tows resulted in approximately fifty pounds of biological samples, including plankton and small fish. Daily samples of aerosol were also taken.</p>
<p>Early investigation following an accidental release of man-made radionuclides is key to understanding the magnitude of the release and the relationship to public health issues The research results also set the stage for the use of the longer lived radionuclides as tracers in subsequent studies by the community to understand ocean processes.</p>
Fukushima Radionuclide Levels
largerWorkCitation
project
eng; USA
oceans
141.4
147.119
33.982
38.002
2011-06-06
2011-06-17
Northwest Pacific Ocean
0
BCO-DMO catalogue of parameters from Surface and hydrocast Cesium isotopes 137 and 134 concentrations from the R/V Ka`imikai-O-Kanaloa KOK1108 cruise in June 2011 in the Northwest Pacific Ocean (Fukushima Radionuclide Levels project)
Biological and Chemical Oceanography Data Management Office (BCO-DMO)
Unavailable
508-289-2009
WHOI MS#36
Woods Hole
MA
02543
USA
info@bco-dmo.org
http://www.bco-dmo.org
Monday - Friday 8:00am - 5:00pm
For questions regarding this resource, please contact BCO-DMO via the email address provided.
pointOfContact
http://lod.bco-dmo.org/id/dataset-parameter/27048.rdf
Name: sta
Units: dimensionless
Description: <p>CTS station number</p>
http://lod.bco-dmo.org/id/dataset-parameter/27049.rdf
Name: cast
Units: dimensionless
Description: <p>CTD cast number</p>
http://lod.bco-dmo.org/id/dataset-parameter/27050.rdf
Name: event
Units: dimensionless
Description: <p>Cruise event identifier</p>
http://lod.bco-dmo.org/id/dataset-parameter/27051.rdf
Name: date
Units: unitless
Description: <p>Date of sample in YYYYMMDD format</p>
http://lod.bco-dmo.org/id/dataset-parameter/27052.rdf
Name: longitude
Units: decimal degrees
Description: <p>longitude</p>
http://lod.bco-dmo.org/id/dataset-parameter/27053.rdf
Name: latitude
Units: decimal degrees
Description: <p>latitude</p>
http://lod.bco-dmo.org/id/dataset-parameter/27054.rdf
Name: bot_Nis
Units: dimensionless
Description: <p>sample bottle number</p>
http://lod.bco-dmo.org/id/dataset-parameter/27055.rdf
Name: time_local
Units: hhmm
Description: <p>localtime of cast</p>
http://lod.bco-dmo.org/id/dataset-parameter/27056.rdf
Name: press
Units: decibars
Description: <p>sampling pressure</p>
http://lod.bco-dmo.org/id/dataset-parameter/27057.rdf
Name: depth
Units: meters
Description: <p>sampling depth</p>
http://lod.bco-dmo.org/id/dataset-parameter/27059.rdf
Name: temp
Units: degrees Celsius
Description: <p>Temperature</p>
http://lod.bco-dmo.org/id/dataset-parameter/27060.rdf
Name: potemp
Units: degrees Celsius
Description: <p>Potential Temperature</p>
http://lod.bco-dmo.org/id/dataset-parameter/27061.rdf
Name: sigma_0
Units: kilograms/meter^3
Description: <p>Potential Density</p>
http://lod.bco-dmo.org/id/dataset-parameter/27062.rdf
Name: sal_cal
Units: PSU
Description: <p>Salinity calibrated to water sample salinity</p>
http://lod.bco-dmo.org/id/dataset-parameter/27063.rdf
Name: O2_cal
Units: milliliters/liter
Description: <p>dissolved oxygen concentration calibrated to water sample oxygen</p>
http://lod.bco-dmo.org/id/dataset-parameter/27064.rdf
Name: sal_nis
Units: PSU
Description: <p>Salinity from water samples</p>
http://lod.bco-dmo.org/id/dataset-parameter/27065.rdf
Name: O2_nis
Units: milliliters/liter
Description: <p>dissolved oxygen concentration from water samples</p>
http://lod.bco-dmo.org/id/dataset-parameter/27066.rdf
Name: Cs137
Units: Bq/meter^3
Description: <p>Cesium-137</p>
http://lod.bco-dmo.org/id/dataset-parameter/27067.rdf
Name: err_Cs137
Units: Bq/meter^3
Description: <p>standard error for 137Cs measurement</p>
http://lod.bco-dmo.org/id/dataset-parameter/27068.rdf
Name: Cs134
Units: Bq/meter^3
Description: <p>Cesium-134</p>
http://lod.bco-dmo.org/id/dataset-parameter/27069.rdf
Name: err_Cs134
Units: Bq/meter^3
Description: <p>standard error for 137Cs measurement</p>
http://lod.bco-dmo.org/id/dataset-parameter/27070.rdf
Name: Cs134_Cs137
Units: Bq/meter^3
Description: <p>Ratio of Cesium-134 to Cesium-137</p>
http://lod.bco-dmo.org/id/dataset-parameter/27071.rdf
Name: err_Cs134_Cs137
Units: Bq/meter^3
Description: <p>standard error for measurement of 134Cs to 137Cs ratio</p>
http://lod.bco-dmo.org/id/dataset-parameter/27179.rdf
Name: WHOI_Cs_Code
Units: dim
Description: <p>WHOI Cs code</p>
http://lod.bco-dmo.org/id/dataset-parameter/764095.rdf
Name: time
Units: unitless
Description:
http://lod.bco-dmo.org/id/dataset-parameter/764111.rdf
Name: date_local
Units: unitless
Description: <p>local date in YYYYMMDD format.</p>
GB/NERC/BODC > British Oceanographic Data Centre, Natural Environment Research Council, United Kingdom
Biological and Chemical Oceanography Data Management Office (BCO-DMO)
Unavailable
508-289-2009
WHOI MS#36
Woods Hole
MA
02543
USA
info@bco-dmo.org
http://www.bco-dmo.org
Monday - Friday 8:00am - 5:00pm
For questions regarding this resource, please contact BCO-DMO via the email address provided.
pointOfContact
99795
https://darchive.mblwhoilibrary.org/bitstream/1912/24149/1/dataset-3624_hydrocast-cesium-isotopes__v2.tsv
download
https://doi.org/10.1575/1912/bco-dmo.3624.2
download
onLine
dataset
<p>Water samples were collected in Niskin bottles attached to a CTD Rosette.</p>
Specified by the Principal Investigator(s)
<p>Method for determination of cesium-134 and -137 in seawater</p>
<p>Surface samples were pumped directly into new, calibrated 20 liter plastic cubitainers. Deeper samples (20-1000 m) were collected by CTD/Rosette. We found that the sample processing improved with 1 micromol prefiltration, presumably due to remove of organic particulates. This will not impact total Cs activities as the measured 137Cs and 134Cs on the 1 µm filters averaged only &lt; 0.04% of the total during this cruise, consistent with the soluble nature of Cs in seawater.</p>
<p>Following collection, samples were acidified to pH 1-2 with JT Baker ultrapure nitric acid (130 mL per 22 L seawater). A stable 133Cs carrier (25 mg per mL standard, 1 mL per sample) was added for calibration of Cs extraction on the resin columns. Samples were allowed to equilibrate for at least 1 hour and an initial aliquot of sample was removed. Samples were extracted onto an ion exchange resin made of the organic polymer polyacrylonitrile, (PAN) and ammonium molybdophosphate (AMP) (1). Precleaned (with 0.1 N nitric acid) biorad glass chromatography columns (1.0x10 cm) were filled with 5 mL AMP-PAN resin in 0.1 N nitric acid. A frit was added above the resin to prevent re-suspension. Resin was allowed to settle for &gt; 1 hour before processing. Samples were pumped directly from cubitainers through the resin column at a flow rate of 30-35 mL per minute. Eluted sample was collected into cleaned cubitainers and a final solution aliquot was taken to determine the column extraction efficiency by measuring stable 133Cs.</p>
<p>AMP-PAN resin was transferred to a vial and gamma counted while still wet for 134Cs and 137Cs isotopes using closed-end coaxial well detectors in the lab. Samples were counted until counting errors on all Cs peaks were generally below 5-10% (depending on sample activity). Samples with low activities were counted for 24-48 hours. Gamma spectrometers were calibrated with a range of 134Cs and 137Cs standards purchased from Eckert and Ziegler. The 137Cs peak at 661 keV and 134Cs peaks at 604 and 795 keV were identified and analyzed with Aptec software.</p>
<p>To check for column recoveries, initial and final sample aliquots containing stable cesium were diluted with 5% ultrapure nitric acid and analyzed on an Element 2 ICP-MS (Thermo Fisher Scientific, WHOI plasma facility) equipped with PFA MicroFlow nebulizer, quartz spray chamber and regular cones. Recovery corrections were applied to measured 134Cs and 137Cs activities with an average recovery of 93 plus/minus 5% standard deviation.</p>
<p>Calibration standards were run using this new AMP-PAN method for 137Cs. We found good agreement between archived water from the Sargasso Sea collected in 1978 (internal WHOI lab standard 137Cs = 3.4 ± 0.4 Bq m-3) and results of triplicate samples analyzed here (3.7 plus/minus 0.2 Bq m-3). Similarly, we measured a 137Cs activity in a single 5 L sample of 369 plus/minus 8 Bq m-3 in an IAEA Irish Sea water reference material, IAEA-443, which has a 95% confidence limit of 340-370 Bq m-3 (2).</p>
<p>The concentration of cesium isotopes in water is reported in units of Bq (1 Becquerel = one disintegration per second) per unit volume (Bq m-3). All activities are decay corrected to April 6th, the date of the maximum direct radioactivity discharge into the ocean (3).</p>
<p>Surface Cs measured by underway system is reported with the casts as the shallowest measurement and assigned a depth and pressure of 2.0.</p>
<p><strong>BCO-DMO notes:</strong> Codes (parameter name WHOI_Cs_codes) were assigned to identify bottle sample type:</p>
<p>uw = underway Cs sample ns = not sample ind = Cs sample was drawn from a single bottle cb_X_X = Cs sample was drawn from multiple bottle identified by X and X</p>
Specified by the Principal Investigator(s)
asNeeded
7.x-1.1
Biological and Chemical Oceanography Data Management Office (BCO-DMO)
Unavailable
508-289-2009
WHOI MS#36
Woods Hole
MA
02543
USA
info@bco-dmo.org
http://www.bco-dmo.org
Monday - Friday 8:00am - 5:00pm
For questions regarding this resource, please contact BCO-DMO via the email address provided.
pointOfContact
CTD Sea-Bird 911
CTD Sea-Bird 911
PI Supplied Instrument Name: CTD Sea-Bird 911 Instrument Name: CTD Sea-Bird 911 Instrument Short Name:CTD SBE 911 Instrument Description: The Sea-Bird SBE 911 is a type of CTD instrument package. The SBE 911 includes the SBE 9 Underwater Unit and the SBE 11 Deck Unit (for real-time readout using conductive wire) for deployment from a vessel. The combination of the SBE 9 and SBE 11 is called a SBE 911. The SBE 9 uses Sea-Bird's standard modular temperature and conductivity sensors (SBE 3 and SBE 4). The SBE 9 CTD can be configured with auxiliary sensors to measure other parameters including dissolved oxygen, pH, turbidity, fluorescence, light (PAR), light transmission, etc.). More information from Sea-Bird Electronics. Community Standard Description: http://vocab.nerc.ac.uk/collection/L22/current/TOOL0035/
Niskin bottle
Niskin bottle
PI Supplied Instrument Name: Niskin bottle Instrument Name: Niskin bottle Instrument Short Name:Niskin bottle Instrument Description: A Niskin bottle (a next generation water sampler based on the Nansen bottle) is a cylindrical, non-metallic water collection device with stoppers at both ends. The bottles can be attached individually on a hydrowire or deployed in 12, 24, or 36 bottle Rosette systems mounted on a frame and combined with a CTD. Niskin bottles are used to collect discrete water samples for a range of measurements including pigments, nutrients, plankton, etc. Community Standard Description: http://vocab.nerc.ac.uk/collection/L22/current/TOOL0412/
Cruise: KOK1108
KOK1108
R/V Ka`imikai-O-Kanaloa
Community Standard Description
International Council for the Exploration of the Sea
R/V Ka`imikai-O-Kanaloa
vessel
KOK1108
Kenneth O. Buesseler
Woods Hole Oceanographic Institution
http://bcodata.whoi.edu/Fukushima/Fukushima_KOK1108_dailyBlog.pdf
Report describing KOK1108
R/V Ka`imikai-O-Kanaloa
Community Standard Description
International Council for the Exploration of the Sea
R/V Ka`imikai-O-Kanaloa
vessel