http://lod.bco-dmo.org/id/dataset/3632
eng; USA
utf8
dataset
Highest level of data collection, from a common set of sensors or instrumentation, usually within the same research project
Biological and Chemical Oceanography Data Management Office (BCO-DMO)
Unavailable
508-289-2009
WHOI MS#36
Woods Hole
MA
02543
USA
info@bco-dmo.org
http://www.bco-dmo.org
Monday - Friday 8:00am - 5:00pm
For questions regarding this resource, please contact BCO-DMO via the email address provided.
pointOfContact
2012-03-21
ISO 19115-2 Geographic Information - Metadata - Part 2: Extensions for Imagery and Gridded Data
ISO 19115-2:2009(E)
CTD profiles from the Great Lakes, North America collected during various R/V Blue Heron cruises between 2009-2012 (SINC project)
2016-08-24
publication
2016-08-24
revision
BCO-DMO Linked Data URI
2016-08-24
creation
http://lod.bco-dmo.org/id/dataset/3632
Dr Robert W. Sterner
University of Minnesota Twin Cities
principalInvestigator
Biological and Chemical Oceanography Data Management Office (BCO-DMO)
Unavailable
508-289-2009
WHOI MS#36
Woods Hole
MA
02543
USA
info@bco-dmo.org
http://www.bco-dmo.org
Monday - Friday 8:00am - 5:00pm
For questions regarding this resource, please contact BCO-DMO via the email address provided.
publisher
Cite this dataset as: Sterner, R. W. (2016) CTD profiles from the Great Lakes, North America collected during various R/V Blue Heron cruises between 2009-2012 (SINC project). Biological and Chemical Oceanography Data Management Office (BCO-DMO). Version Date 2016-08-24 [if applicable, indicate subset used]. http://lod.bco-dmo.org/id/dataset/3632 [access date]
CTD Profile Data from the Great Lakes Dataset Description: <p>This dataset contains CTD profile data collected during R/V Blue Heron cruises in the Great Lakes, North America.</p> Methods and Sampling: <p>CTD casts were conducted during R/V Blue Heron cruises at designated stations.&nbsp;</p>
Funding provided by NSF Division of Ocean Sciences (NSF OCE) Award Number: OCE-0927512 Award URL: https://www.nsf.gov/awardsearch/show-award?AWD_ID=0927512
Funding provided by NSF Division of Ocean Sciences (NSF OCE) Award Number: OCE-0927277 Award URL: https://www.nsf.gov/awardsearch/show-award?AWD_ID=0927277
completed
Dr Robert W. Sterner
University of Minnesota Twin Cities
218-726-7926
Director, Large Lakes Observatory 2205 East 5th St., University of Minnesota Duluth
Duluth
MN
55812-2496
USA
stern007@d.umn.edu
pointOfContact
asNeeded
Unknown
CruiseId
Station
Date
Time
Lat
Lon
press
temp
cond
cond_spec
beam_trans
fluor
CDOM
PAR
sPAR
O2_mg_L
O2_sat
sal
lat_ctd
lon_ctd
flag
O2_umol_kg
ISO_DateTime_UTC
CTD Sea-Bird SBE 911plus
wetstar WSCD
Wetstar WS3S
Biospherical QSP-200L
SBE 4C
SBE 43 Dissolved Oxygen Sensor
SBE 3+
SBE 9+
theme
None, User defined
cruise id
station
date
time of day
latitude
longitude
water pressure
water temperature at measurement depth
conductivity
specific conductance
transmission
fluorescence
colored or chromophoric dissolved organic matter
PAR
SPAR
dissolved Oxygen
O2 saturation
salinity
flag
ISO_DateTime_UTC
featureType
BCO-DMO Standard Parameters
CTD Sea-Bird SBE 911plus
Fluorometer
Fluorometer
Photosynthetically Available Radiation Sensor
Salinity Sensor
Sea-Bird SBE 43 Dissolved Oxygen Sensor
Sea-Bird SBE-3 Temperature Sensor
Transmissometer
Water Depth Logger
instrument
BCO-DMO Standard Instruments
BH10-01
BH10-06
BH10-13
BH10-22
BH09-SINC1
BH11-01
BH11-14
BH12-20
BH12-10
service
Deployment Activity
Lake Superior
Lakes Superior, Huron and Ontario
Great lakes
place
Locations
otherRestrictions
otherRestrictions
Access Constraints: none. Use Constraints: Please follow guidelines at: http://www.bco-dmo.org/terms-use Distribution liability: Under no circumstances shall BCO-DMO be liable for any direct, incidental, special, consequential, indirect, or punitive damages that result from the use of, or the inability to use, the materials in this data submission. If you are dissatisfied with any materials in this data submission your sole and exclusive remedy is to discontinue use.
Laurentian Great Lakes Ecosystem Studies
http://www.tc.umn.edu/~stern007/
Laurentian Great Lakes Ecosystem Studies
A series of studies concerned with the chemistry and biology of the Laurentian Great Lakes. These different studies share a focus on the dynamics of organic pools of carbon, nitrogen and phosphorus, and the stoichiometric linkages among these elements. At different times, work also has focused on trace metal dynamics and interactions with biota, the rates of primary production and herbivory, rates and patterns of primary productivity, and the century-long, steady trend of increasing nitrate in Earth's largest lake by area. Microbial populations have been investigated and linked to these chemical properties.
This Program was created by BCO-DMO staff to bring various Laurentian Great Lakes Research projects under one umbrella for improved discovery and access.
Dates: 1998 - 2014
Funding: NSF/OCE and Minnesota Sea Grant
Laurentian Great Lakes Ecosystem Studies
largerWorkCitation
program
Sources and Sinks of Stoichiometrically Imbalanced Nitrate in the Laurentian Great Lakes
http://www.tc.umn.edu/~stern007/
Sources and Sinks of Stoichiometrically Imbalanced Nitrate in the Laurentian Great Lakes
<p>This award is funded under the American Recovery and Reinvestment Act of 2009 (Public Law 111-5).</p>
<p>Over large scales encompassing heterogeneous conditions, biogeochemical mechanisms act to achieve a stoichiometric balance between nitrogen and phosphorus. Locally, however, imbalances can develop. The Laurentian Great Lakes are a vast freshwater system where nitrate has been steadily accumulating for decades. Previous work has shown that in Lake Superior, the headwaters of the system, nitrate enters the lake water primarily due to in-lake biogeochemical processes, not due to passive accumulation of nitrate as a conservative substance as previously believed. An extreme stoichiometric imbalance of nitrate/phosphate ratios (~ 10,000 by moles) is present and is apparently growing. This set of prior findings opens up two major questions. First, what are the principal biogeochemical control points that tip the N cycle toward buildup of excess nitrate? And second, how does the extreme stoichiometric imbalance affect the ecology and evolution of Lake Superior's biota?</p>
<p>In this project, researchers at the University of Minnesota - Twin Cities and the Bowling Green State University, who previously documented the nitrate buildup in Lake Superior, will continue their research program and address these two questions. The project is organized around making comparative measurements of N assimilation, nitrification, denitrification, anammox, and microbial community structure in Lake Superior and in the central basin of Lake Erie. These two environments differ greatly in many ways including redox state and organic carbon production rates. From the standpoint of N balancing mechanisms, they can be considered end members within the Laurentian Great Lakes. Additional data will be collected across a larger region of the Upper Great Lakes including Lake Huron. Up-to-date mass balance budgets of nitrogen of the most of the Great Lakes (Lake Superior is already done) will be constructed and linked with hydrologic fluxes to gain insights into the dynamics of N across the entire Laurentian Great Lakes System. Observations of water chemistry will be made with ship-board sampling together with field-deployed nitrate sensors in shallow and deep waters. Process studies will be performed in the water column and at the sediment-water interface and will involve sensitive stable isotope techniques. These will include measurements of NO3 and NH4+ uptake into different size fractions, exchanges of different forms of N and C between the water column and sediments, nitrification, denitrification, and anammox. The diversity and abundance of ammonia oxidizing Archea (AOA) and bacteria (AOB) will be studied using quantitative real time PCR and DGGE. Similarly, the genetic composition of denitrifyers and anammox bacteria will be studied to see if they too are represented by novel clades in Lake Superior. Cultured nitrifyers will be characterized in terms of growth under different conditions typically encountered across the Great Lakes. The project will yield valuable information and insight into the operation of the nitrogen cycle under conditions that promote stoichiometric imbalances.</p>
<p>Previous work (2004-2007) by this team of investigators and others investigated the intersection of the nitrogen cycle with the phosphorus and iron cycles in Lake Superior and included studying the responses of plankton communities to differing nutrient supply regimes. Prior to 2004, many of the same investigators conducted research on the existence, mechanisms, spatial-temporal extent, and significance of trace metal limitation to primary production in Lake Superior. This early research was designed to quantify and characterize total and bioactive trace metal concentrations of Al, Fe, Mn, Zn, Cu, Cd, and Co in Lake Superior. The project included immunological and fluorescence assays to assess metal deficiency in algae in the natural environment and trace metal enrichment experiments in the laboratory to assess limitation experimentally.</p>
<p>The Laurentian Great Lakes are a valuable regional resource and an immense reservoir of planetary fresh water. Lake Superior is often considered to be relatively pristine but the ultimate source of the N converted to nitrate in the lake is as yet unknown and may involve past changes to the watershed or other anthropogenic factors.</p>
SINC
largerWorkCitation
project
eng; USA
inlandWaters
Lake Superior; Lakes Superior, Huron and Ontario; Great lakes
-92.05
-79.894
41.733
49.997
2009-11-10
2012-08-17
Lake Superior; Great Lakes
0
BCO-DMO catalogue of parameters from CTD profiles from the Great Lakes, North America collected during various R/V Blue Heron cruises between 2009-2012 (SINC project)
Biological and Chemical Oceanography Data Management Office (BCO-DMO)
Unavailable
508-289-2009
WHOI MS#36
Woods Hole
MA
02543
USA
info@bco-dmo.org
http://www.bco-dmo.org
Monday - Friday 8:00am - 5:00pm
For questions regarding this resource, please contact BCO-DMO via the email address provided.
pointOfContact
http://lod.bco-dmo.org/id/dataset-parameter/27195.rdf
Name: CruiseId
Units: text
Description: <p>Cruise Id</p>
http://lod.bco-dmo.org/id/dataset-parameter/27196.rdf
Name: Station
Units: text
Description: <p>Station - From Station List</p>
http://lod.bco-dmo.org/id/dataset-parameter/27198.rdf
Name: Date
Units: YYYYMMDD
Description: <p>Station date (GMT)</p>
http://lod.bco-dmo.org/id/dataset-parameter/27199.rdf
Name: Time
Units: HHMMSS
Description: <p>Station time (GMT)</p>
http://lod.bco-dmo.org/id/dataset-parameter/27200.rdf
Name: Lat
Units: decimal degrees
Description: <p>Station latitude (South is negative)</p>
http://lod.bco-dmo.org/id/dataset-parameter/27201.rdf
Name: Lon
Units: decimal degrees
Description: <p>Station longitude (West is negative)</p>
http://lod.bco-dmo.org/id/dataset-parameter/27202.rdf
Name: press
Units: decibars
Description: <p>Pressure digiquartz SBE 9+</p>
<p>SeaBird documentaion for converting pressure in decibars to depth in meters available at: <a href="http://www.seabird.com/application_notes/AN69.htm">http://www.seabird.com/application_notes/AN69.htm</a></p>
<p>Formula for fresh water:<br />
depth (meters) = pressure (decibars) * 1.019716</p>
http://lod.bco-dmo.org/id/dataset-parameter/27203.rdf
Name: temp
Units: degrees C
Description: <p>Temperature</p>
<p>ITS-90 SBE 3+</p>
http://lod.bco-dmo.org/id/dataset-parameter/27204.rdf
Name: cond
Units: microSiemens per centimeter
Description: <p>Conductivity SBE 4C</p>
http://lod.bco-dmo.org/id/dataset-parameter/27205.rdf
Name: cond_spec
Units: microSiemens per centimeter
Description: <p>Specific Conductance SBE 4C</p>
http://lod.bco-dmo.org/id/dataset-parameter/27206.rdf
Name: beam_trans
Units: percentage
Description: <p>Beam Transmission Chelsea/Seatech/WET Labs Cstar</p>
http://lod.bco-dmo.org/id/dataset-parameter/27207.rdf
Name: fluor
Units: milligrams per cubic meters
Description: <p>Fluorescence</p>
<p>Wetlabs Wetstar WS3S</p>
http://lod.bco-dmo.org/id/dataset-parameter/27208.rdf
Name: CDOM
Units: milligrams per cubic meters
Description: <p>CDOM = colored dissolved organic matter</p>
<p>Wetlabs Wetstar WSCD</p>
http://lod.bco-dmo.org/id/dataset-parameter/27209.rdf
Name: PAR
Units: microEinsteins per square centimeters per second
Description: <p>PAR/Irradiance = Photosynthetically available radiation</p>
<p>Biospherical QSP-200L</p>
http://lod.bco-dmo.org/id/dataset-parameter/27210.rdf
Name: sPAR
Units: microEinsteins per square centimeters per second
Description: <p>Surface Photosynthetially Available Radiation</p>
http://lod.bco-dmo.org/id/dataset-parameter/27211.rdf
Name: O2_mg_L
Units: milligrams per liter
Description: <p>Dissolved Oxygen</p>
<p>SBE43</p>
http://lod.bco-dmo.org/id/dataset-parameter/27212.rdf
Name: O2_sat
Units: percentage
Description: <p>Dissolved Oxygen percent saturation</p>
http://lod.bco-dmo.org/id/dataset-parameter/27215.rdf
Name: sal
Units: PSU
Description: <p>Salinity SBE 4C</p>
http://lod.bco-dmo.org/id/dataset-parameter/27216.rdf
Name: lat_ctd
Units: decimal degrees
Description: <p>Data latitude (South is negative) from the CTD</p>
http://lod.bco-dmo.org/id/dataset-parameter/27217.rdf
Name: lon_ctd
Units: decimal degrees
Description: <p>Data longitude (West is negative) from the CTD</p>
http://lod.bco-dmo.org/id/dataset-parameter/27219.rdf
Name: flag
Units: integer
Description: <p>Flag calculated by software</p>
http://lod.bco-dmo.org/id/dataset-parameter/27220.rdf
Name: O2_umol_kg
Units: micromoles per kilogram
Description: <p>Dissolved oxygen in micromoles per kilogram</p>
http://lod.bco-dmo.org/id/dataset-parameter/657954.rdf
Name: ISO_DateTime_UTC
Units: unitless
Description: <p>Date/Time (UTC) in ISO format YYYY-MM-DDTHH:MM:SS[.xx]</p>
GB/NERC/BODC > British Oceanographic Data Centre, Natural Environment Research Council, United Kingdom
Biological and Chemical Oceanography Data Management Office (BCO-DMO)
Unavailable
508-289-2009
WHOI MS#36
Woods Hole
MA
02543
USA
info@bco-dmo.org
http://www.bco-dmo.org
Monday - Friday 8:00am - 5:00pm
For questions regarding this resource, please contact BCO-DMO via the email address provided.
pointOfContact
140982365
https://datadocs.bco-dmo.org/file/0AAMn6wHkrDyqN/SINC_CTD.csv
SINC_CTD.csv
Primary data file for dataset ID 3632
download
https://osprey.bco-dmo.org/dataset/3632/data/download
download
onLine
dataset
<p>CTD casts were conducted during R/V Blue Heron cruises at designated stations.&nbsp;</p>
from Cruise: BH10-01 <p>* Sea-Bird SBE 9 Data File:<br />
* FileName = C:SeasaveRawCTD_2010Sterner_MayCD1_02.hex<br />
* Software Version Seasave V 7.20c<br />
* Temperature SN = 2723<br />
* Conductivity SN = 2271<br />
* Number of Bytes Per Scan = 34<br />
* Number of Voltage Words = 5<br />
* Number of Scans Averaged by the Deck Unit = 1<br />
* System UpLoad Time = May 14 2010 13:32:16<br />
* NMEA Latitude = 47 03.50 N<br />
* NMEA Longitude = 091 24.77 W<br />
* NMEA UTC (Time) = May 14 2010 18:32:12<br />
* Store Lat/Lon Data = Append to Every Scan<br />
** Ship:<br />
** Station:<br />
** Operator:<br />
# nquan = 15<br />
# nvalues = 36024 <br />
# units = specified<br />
# name 0 = prDM: Pressure, Digiquartz [db]<br />
# name 1 = t090C: Temperature [ITS-90, deg C]<br />
# name 2 = c0uS/cm: Conductivity [uS/cm]<br />
# name 3 = specc: Specific Conductance [uS/cm]<br />
# name 4 = xmiss: Beam Transmission, Chelsea/Seatech/Wetlab CStar [%]<br />
# name 5 = wetStar: Fluorescence, Wetlab Wetstar [mg/m^3]<br />
# name 6 = dz/dtM: Descent Rate [m/s]<br />
# name 7 = ph: pH<br />
# name 8 = par: PAR/Irradiance, Biospherical/Licor<br />
# name 9 = sal00: Salinity [PSU]<br />
# name 10 = sbeox0Mm/Kg: Oxygen, SBE 43 [umol/Kg]<br />
# name 11 = sbeox0Mg/L: Oxygen, SBE 43 [mg/l]<br />
# name 12 = wetCDOM: Fluorescence, Wetlab CDOM [mg/m^3]<br />
# name 13 = scan: Scan Count<br />
# name 14 = flag: 0.000e+00<br />
# span 0 = 0.809, 220.882 <br />
# span 1 = 2.9832, 3.4509 <br />
# span 2 = 56.427799, 59.041880 <br />
# span 3 = 100.619, 105.090 <br />
# span 4 = 89.1379, 93.8012 <br />
# span 5 = 0.7316, 3.6803 <br />
# span 6 = -0.723, 0.668 <br />
# span 7 = 7.839, 8.003 <br />
# span 8 = 1.0000e-12, 2.5855e+03 <br />
# span 9 = 0.0434, 0.0454 <br />
# span 10 = 0.000, 0.000 <br />
# span 11 = 0.00000, 0.00000 <br />
# span 12 = 1.1320, 5.3762 <br />
# span 13 = 1, 36024 <br />
# span 14 = 0.0000e+00, 0.0000e+00 <br />
# interval = seconds: 0.0416667 <br />
# start_time = May 14 2010 13:32:16<br />
# bad_flag = -9.990e-29<br />
# sensor 0 = Frequency 0 temperature, 2723, 24 Feb 2010<br />
# sensor 1 = Frequency 1 conductivity, 2271, 24 Feb 2010, cpcor = -9.5700e-08<br />
# sensor 2 = Frequency 2 pressure, 75869, 31 Mar 2009<br />
# sensor 3 = Extrnl Volt 0 Oxygen, SBE, primary, 0471, 07-Apr-10p<br />
# sensor 4 = Extrnl Volt 1 WET Labs, CDOM<br />
# sensor 5 = Extrnl Volt 2 pH, 270135, 18 Mar 2010<br />
# sensor 6 = Extrnl Volt 3 oxidation reduction potential, 270135, 30 Mar 2009<br />
# sensor 7 = Extrnl Volt 4 transmissometer, primary, CST-268PR, 25 Mar 2010<br />
# sensor 8 = Extrnl Volt 5 WET Labs, WETStar fluorometer, WS3S-553P, 7 Apr 2010<br />
# sensor 9 = Extrnl Volt 6 altimeter<br />
# sensor 10 = Extrnl Volt 7 irradiance (PAR), primary, 4554, 23 Feb 2010<br />
# sensor 11 = Extrnl Volt 9 surface irradiance (SPAR), degrees = 0.0<br />
# datcnv_date = May 16 2010 17:06:59, 5.37e<br />
# datcnv_in = C:SeasaveRawCTD_2010Sterner_MayCD1_02.hex C:SeasaveConfiguration Files2010CTDCon2010_alpha.con<br />
# datcnv_skipover = 0<br />
# file_type = ascii<br />
*END*<br />
</p>
from Cruise: BH10-06 <p>* Sea-Bird SBE 9 Data File:<br />
* FileName = C:SeasaveRawCTD_2010Sterner_JuneCD1_01.hex<br />
* Software Version Seasave V 7.20c<br />
* Temperature SN = 2723<br />
* Conductivity SN = 2271<br />
* Number of Bytes Per Scan = 34<br />
* Number of Voltage Words = 5<br />
* Number of Scans Averaged by the Deck Unit = 1<br />
* System UpLoad Time = Jun 25 2010 13:23:21<br />
* NMEA Latitude = 47 03.89 N<br />
* NMEA Longitude = 091 25.77 W<br />
* NMEA UTC (Time) = Jun 25 2010 18:22:09<br />
* Store Lat/Lon Data = Append to Every Scan<br />
** Ship:<br />
** Station:<br />
** Operator:<br />
# nquan = 15<br />
# nvalues = 34501 <br />
# units = specified<br />
# name 0 = prDM: Pressure, Digiquartz [db]<br />
# name 1 = t090C: Temperature [ITS-90, deg C]<br />
# name 2 = c0uS/cm: Conductivity [uS/cm]<br />
# name 3 = specc: Specific Conductance [uS/cm]<br />
# name 4 = xmiss: Beam Transmission, Chelsea/Seatech/Wetlab CStar [%]<br />
# name 5 = wetStar: Fluorescence, Wetlab Wetstar [mg/m^3]<br />
# name 6 = dz/dtM: Descent Rate [m/s]<br />
# name 7 = ph: pH<br />
# name 8 = par: PAR/Irradiance, Biospherical/Licor<br />
# name 9 = sal00: Salinity [PSU]<br />
# name 10 = sbeox0Mm/Kg: Oxygen, SBE 43 [umol/Kg]<br />
# name 11 = sbeox0Mg/L: Oxygen, SBE 43 [mg/l]<br />
# name 12 = wetCDOM: Fluorescence, Wetlab CDOM [mg/m^3]<br />
# name 13 = scan: Scan Count<br />
# name 14 = flag: 0.000e+00<br />
# span 0 = 0.544, 246.599 <br />
# span 1 = 3.5446, 12.1537 <br />
# span 2 = 57.553451, 74.092591 <br />
# span 3 = 97.475, 103.067 <br />
# span 4 = 82.4021, 94.2416 <br />
# span 5 = 0.6584, 7.6547 <br />
# span 6 = -0.591, 0.352 <br />
# span 7 = 7.828, 8.185 <br />
# span 8 = 1.0000e-12, 1.6487e+03 <br />
# span 9 = 0.0437, 0.0480 <br />
# span 10 = 0.000, 0.000 <br />
# span 11 = 0.00000, 0.00000 <br />
# span 12 = 0.9777, 1.9037 <br />
# span 13 = 1, 34501 <br />
# span 14 = 0.0000e+00, 0.0000e+00 <br />
# interval = seconds: 0.0416667 <br />
# start_time = Jun 25 2010 13:23:21<br />
# bad_flag = -9.990e-29<br />
# sensor 0 = Frequency 0 temperature, 2723, 24 Feb 2010<br />
# sensor 1 = Frequency 1 conductivity, 2271, 24 Feb 2010, cpcor = -9.5700e-08<br />
# sensor 2 = Frequency 2 pressure, 75869, 31 Mar 2009<br />
# sensor 3 = Extrnl Volt 0 Oxygen, SBE, primary, 0471, 07-Apr-10p<br />
# sensor 4 = Extrnl Volt 1 WET Labs, CDOM<br />
# sensor 5 = Extrnl Volt 2 pH, 270135, 18 Mar 2010<br />
# sensor 6 = Extrnl Volt 3 oxidation reduction potential, 270135, 30 Mar 2009<br />
# sensor 7 = Extrnl Volt 4 transmissometer, primary, CST-268PR, 25 Mar 2010<br />
# sensor 8 = Extrnl Volt 5 WET Labs, WETStar fluorometer, WS3S-553P, 7 Apr 2010<br />
# sensor 9 = Extrnl Volt 6 altimeter<br />
# sensor 10 = Extrnl Volt 7 irradiance (PAR), primary, 4554, 23 Feb 2010<br />
# sensor 11 = Extrnl Volt 9 surface irradiance (SPAR), degrees = 0.0<br />
# datcnv_date = Jun 27 2010 14:26:52, 5.37e<br />
# datcnv_in = C:SeasaveRawCTD_2010Sterner_JuneCD1_01.hex C:SeasaveConfiguration Files2010CTDCon2010_alpha.con<br />
# datcnv_skipover = 0<br />
# file_type = ascii<br />
*END*<br />
</p>
from Cruise: BH10-13 <p>* Sea-Bird SBE 9 Data File:<br />
* FileName = C:SeasaveRawCTD_2010Sterner_AugustCD1_01.hex<br />
* Software Version Seasave V 7.20c<br />
* Temperature SN = 2723<br />
* Conductivity SN = 2271<br />
* Number of Bytes Per Scan = 34<br />
* Number of Voltage Words = 5<br />
* Number of Scans Averaged by the Deck Unit = 1<br />
* System UpLoad Time = Aug 18 2010 10:58:13<br />
* NMEA Latitude = 47 03.91 N<br />
* NMEA Longitude = 091 26.30 W<br />
* NMEA UTC (Time) = Aug 18 2010 15:55:40<br />
* Store Lat/Lon Data = Append to Every Scan<br />
** Ship:<br />
** Station:<br />
** Operator:<br />
# nquan = 18<br />
# nvalues = 38533 <br />
# units = specified<br />
# name 0 = prDM: Pressure, Digiquartz [db]<br />
# name 1 = t090C: Temperature [ITS-90, deg C]<br />
# name 2 = c0uS/cm: Conductivity [uS/cm]<br />
# name 3 = specc: Specific Conductance [uS/cm]<br />
# name 4 = xmiss: Beam Transmission, Chelsea/Seatech/WET Labs CStar [%]<br />
# name 5 = wetStar: Fluorescence, WET Labs WETstar [mg/m^3]<br />
# name 6 = wetCDOM: Fluorescence, WET Labs CDOM [mg/m^3]<br />
# name 7 = par: PAR/Irradiance, Biospherical/Licor<br />
# name 8 = spar: SPAR/Surface Irradiance<br />
# name 9 = sbeox0Mg/L: Oxygen, SBE 43 [mg/l]<br />
# name 10 = sbeox0PS: Oxygen, SBE 43 [% saturation]<br />
# name 11 = dz/dtM: Descent Rate [m/s]<br />
# name 12 = ph: pH<br />
# name 13 = sal00: Salinity, Practical [PSU]<br />
# name 14 = latitude: Latitude [deg]<br />
# name 15 = longitude: Longitude [deg]<br />
# name 16 = scan: Scan Count<br />
# name 17 = flag: 0.000e+00<br />
# span 0 = 0.381, 243.916 <br />
# span 1 = 3.7360, 5.3268 <br />
# span 2 = 57.765617, 60.926259 <br />
# span 3 = 99.208, 101.857 <br />
# span 4 = 89.5783, 95.4851 <br />
# span 5 = 0.5118, 4.0833 <br />
# span 6 = 1.2864, 2.0581 <br />
# span 7 = 1.0000e-12, 4.5454e+02 <br />
# span 8 = 1.8430e+02, 3.7079e+02 <br />
# span 9 = 12.68839, 12.98624 <br />
# span 10 = 96.16482, 102.22034 <br />
# span 11 = -0.673, 0.507 <br />
# span 12 = 7.857, 8.144 <br />
# span 13 = 0.0436, 0.0449 <br />
# span 14 = 47.06516, 47.06614 <br />
# span 15 = -91.43976, -91.43832 <br />
# span 16 = 1, 38533 <br />
# span 17 = 0.0000e+00, 0.0000e+00 <br />
# interval = seconds: 0.0416667<br />
# start_time = Aug 18 2010 15:55:40<br />
# bad_flag = -9.990e-29<br />
#<br />
# <br />
# <!-- Frequency 0, Temperature --><br />
# <br />
# 2723<br />
# 24 Feb 2010<br />
# 1<br />
# 0.00000000e+000<br />
# <strong>0.00000000e+000</strong><br />
# 0.00000000e+000<br />
# 0.00000000e+000<br />
# 0.000<br />
# 4.33286070e-003<br />
# 6.42095668e-004<br />
# <em>2.32440901e-005</em><br />
# 2.26815230e-006<br />
# 1000.000<br />
# 1.00000000<br />
# 0.0000<br />
# <br />
# <br />
# <br />
# <!-- Frequency 1, Conductivity --><br />
# <br />
# 2271<br />
# 24 Feb 2010<br />
# 1<br />
# <!-- Cell const and series R are applicable only for wide range sensors. --><br />
# 0.0000<br />
# 2000.0000<br />
# 0<br />
# <br />
# 0.00000000e+000<br />
# <strong>0.00000000e+000</strong><br />
# 0.00000000e+000<br />
# 0.00000000e+000<br />
# 0.0<br />
# 0.00000000e+000<br />
# <br />
# <br />
# -1.04488660e+001<br />
# 1.44573900e+000<br />
# <em>-1.72104845e-003</em><br />
# 2.03207110e-004<br />
# -9.57000000e-008<br />
# 3.2500e-006<br />
# <!-- WBOTC not applicable unless ConductivityType = 1. --><br />
# 0.00000000e+000<br />
# <br />
# 1.00000000<br />
# 0.00000<br />
# <br />
# <br />
# <br />
# <!-- Frequency 2, Pressure, Digiquartz with TC --><br />
# <br />
# 75869<br />
# 31 Mar 2009<br />
# -8.206847e+003<br />
# -1.514489e-001<br />
# 2.337490e-003<br />
# 5.245000e-002<br />
# 0.000000e+000<br />
# 3.045671e+001<br />
# -3.560049e-004<br />
# 3.341080e-006<br />
# 2.507800e-009<br />
# 0.99985000<br />
# -0.12820<br />
# 0.000000e+000<br />
# 1.287830e-002<br />
# -8.897580e+000<br />
# <br />
# <br />
# <br />
# <!-- A/D voltage 0, Oxygen, SBE 43 --><br />
# <br />
# 0471<br />
# 07-Apr-10p<br />
# 1<br />
# <br />
# <!-- Coefficients for Owens-Millard equation. --><br />
# 0.0000<br />
# 0.0000e+000<br />
# 0.0000<br />
# 0.00e+000<br />
# 0.0000<br />
# 0.0<br />
# <br />
# <br />
# <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and later. --><br />
# 4.9980e-001<br />
# -0.5084<br />
# -2.0487e-003<br />
# <strong> 9.5571e-005</strong><br />
# -1.9119e-006<br />
# 2.5826e+000<br />
# 1.92630e-004<br />
# -4.64800e-002<br />
# 3.6000e-002<br />
# 1.0100<br />
# </p>
<h1>-3.3000e-002</h1>
<p><br />
# </p>
<h2>5.0000e+003</h2>
<p><br />
# </p>
<h3>1.4500e+003</h3>
<p><br />
# <br />
# <br />
# <br />
# <br />
# <!-- A/D voltage 1, Fluorometer, WET Labs CDOM --><br />
# <br />
# WSCD-1178<br />
# 7 Apr 2010<br />
# 63.200<br />
# 0.070<br />
# <br />
# <br />
# <br />
# <!-- A/D voltage 2, pH --><br />
# <br />
# 270135<br />
# 18 Mar 2010<br />
# 4.6237<br />
# 2.5090<br />
# <br />
# <br />
# <br />
# <!-- A/D voltage 3, Oxidation Reduction Potential --><br />
# <br />
# 270135<br />
# 30 Mar 2009<br />
# <strong>2.498000</strong><br />
# -0.494500<br />
# 0.0<br />
# <br />
# <br />
# <br />
# <!-- A/D voltage 4, Transmissometer, Chelsea/Seatech/WET Lab CStar --><br />
# <br />
# CST-268PR<br />
# 25 Mar 2010<br />
# 21.2179<br />
# <strong>-1.2519</strong><br />
# 0.250<br />
# <br />
# <br />
# <br />
# <!-- A/D voltage 5, Fluorometer, WET Labs WETstar --><br />
# <br />
# WS3S-553P<br />
# 7 Apr 2010<br />
# 15.000<br />
# 0.066<br />
# <br />
# <br />
# <br />
# <!-- A/D voltage 6, Altimeter --><br />
# <br />
# 802<br />
# 20 MAR2004<br />
# 15.000<br />
# 0.000<br />
# <br />
# <br />
# <br />
# <!-- A/D voltage 7, PAR/Irradiance, Biospherical/Licor --><br />
# <br />
# 4554<br />
# 23 Feb 2010<br />
# 1.00000000<br />
# <strong>0.00000000</strong><br />
# 2994011976.00000000<br />
# 1.00000000<br />
# -0.50320676<br />
# <br />
# <br />
# <br />
# <!-- SPAR voltage, Unavailable --><br />
# <br />
# <br />
# <!-- SPAR voltage, SPAR/Surface Irradiance --><br />
# <br />
# 20255<br />
# 7-27-06<br />
# 1796.88720329<br />
# 1.00000000<br />
# <br />
# <br />
#<br />
# datcnv_date = Aug 24 2010 15:13:03, 7.20f<br />
# datcnv_in = C:SeasaveRawCTD_2010Sterner_AugustCD1_01.hex C:SeasaveRawCTD_2010Sterner_AugustCD1_01.XMLCON<br />
# datcnv_skipover = 0<br />
# datcnv_ox_hysteresis_correction = yes<br />
# datcnv_ox_tau_correction = yes<br />
# file_type = ascii<br />
*END*<br />
</p>
<p> </p>
from Cruise: BH10-22 <p>* Sea-Bird SBE 9 Data File:<br />
* FileName = C:SeasaveRawCTD_2010Sterner_OctCD1_01.hex<br />
* Software Version Seasave V 7.20c<br />
* Temperature SN = 2723<br />
* Conductivity SN = 2271<br />
* Number of Bytes Per Scan = 34<br />
* Number of Voltage Words = 5<br />
* Number of Scans Averaged by the Deck Unit = 1<br />
* System UpLoad Time = Oct 05 2010 10:49:57<br />
* NMEA Latitude = 47 03.84 N<br />
* NMEA Longitude = 091 25.95 W<br />
* NMEA UTC (Time) = Oct 05 2010 15:46:18<br />
* Store Lat/Lon Data = Append to Every Scan<br />
** Ship:<br />
** Station:<br />
** Operator:<br />
# nquan = 18<br />
# nvalues = 57429 <br />
# units = specified<br />
# name 0 = prDM: Pressure, Digiquartz [db]<br />
# name 1 = t090C: Temperature [ITS-90, deg C]<br />
# name 2 = c0uS/cm: Conductivity [uS/cm]<br />
# name 3 = specc: Specific Conductance [uS/cm]<br />
# name 4 = xmiss: Beam Transmission, Chelsea/Seatech/WET Labs CStar [%]<br />
# name 5 = wetStar: Fluorescence, WET Labs WETstar [mg/m^3]<br />
# name 6 = wetCDOM: Fluorescence, WET Labs CDOM [mg/m^3]<br />
# name 7 = par: PAR/Irradiance, Biospherical/Licor<br />
# name 8 = spar: SPAR/Surface Irradiance<br />
# name 9 = sbeox0Mg/L: Oxygen, SBE 43 [mg/l]<br />
# name 10 = sbeox0PS: Oxygen, SBE 43 [% saturation]<br />
# name 11 = dz/dtM: Descent Rate [m/s]<br />
# name 12 = ph: pH<br />
# name 13 = sal00: Salinity, Practical [PSU]<br />
# name 14 = latitude: Latitude [deg]<br />
# name 15 = longitude: Longitude [deg]<br />
# name 16 = scan: Scan Count<br />
# name 17 = flag: 0.000e+00<br />
# span 0 = -1.323, 244.848 <br />
# span 1 = 3.7131, 9.7931 <br />
# span 2 = -1.728774, 68.922486 <br />
# span 3 = -2.527, 102.061 <br />
# span 4 = 51.4690, 92.9722 <br />
# span 5 = 0.4935, 8.9734 <br />
# span 6 = 0.9777, 2.5982 <br />
# span 7 = 1.0000e-12, 9.9990e+03 <br />
# span 8 = 2.0229e+03, 2.1238e+03 <br />
# span 9 = 9.60225, 12.60689 <br />
# span 10 = 83.42765, 102.64286 <br />
# span 11 = -0.506, 0.295 <br />
# span 12 = 8.212, 8.778 <br />
# span 13 = 0.0000, 0.0471 <br />
# span 14 = 47.06340, 47.06410 <br />
# span 15 = -91.43350, -91.43236 <br />
# span 16 = 1, 57429 <br />
# span 17 = 0.0000e+00, 0.0000e+00 <br />
# interval = seconds: 0.0416667<br />
# start_time = Oct 05 2010 15:46:18<br />
# bad_flag = -9.990e-29<br />
#<br />
# <br />
# <!-- Frequency 0, Temperature --><br />
# <br />
# 2723<br />
# 24 Feb 2010<br />
# 1<br />
# 0.00000000e+000<br />
# <strong>0.00000000e+000</strong><br />
# 0.00000000e+000<br />
# 0.00000000e+000<br />
# 0.000<br />
# 4.33286070e-003<br />
# 6.42095668e-004<br />
# <em>2.32440901e-005</em><br />
# 2.26815230e-006<br />
# 1000.000<br />
# 1.00000000<br />
# 0.0000<br />
# <br />
# <br />
# <br />
# <!-- Frequency 1, Conductivity --><br />
# <br />
# 2271<br />
# 24 Feb 2010<br />
# 1<br />
# <!-- Cell const and series R are applicable only for wide range sensors. --><br />
# 0.0000<br />
# 2000.0000<br />
# 0<br />
# <br />
# 0.00000000e+000<br />
# <strong>0.00000000e+000</strong><br />
# 0.00000000e+000<br />
# 0.00000000e+000<br />
# 0.0<br />
# 0.00000000e+000<br />
# <br />
# <br />
# -1.04488660e+001<br />
# 1.44573900e+000<br />
# <em>-1.72104845e-003</em><br />
# 2.03207110e-004<br />
# -9.57000000e-008<br />
# 3.2500e-006<br />
# <!-- WBOTC not applicable unless ConductivityType = 1. --><br />
# 0.00000000e+000<br />
# <br />
# 1.00000000<br />
# 0.00000<br />
# <br />
# <br />
# <br />
# <!-- Frequency 2, Pressure, Digiquartz with TC --><br />
# <br />
# 75869<br />
# 31 Mar 2009<br />
# -8.206847e+003<br />
# -1.514489e-001<br />
# 2.337490e-003<br />
# 5.245000e-002<br />
# 0.000000e+000<br />
# 3.045671e+001<br />
# -3.560049e-004<br />
# 3.341080e-006<br />
# 2.507800e-009<br />
# 0.99985000<br />
# -0.12820<br />
# 0.000000e+000<br />
# 1.287830e-002<br />
# -8.897580e+000<br />
# <br />
# <br />
# <br />
# <!-- A/D voltage 0, Oxygen, SBE 43 --><br />
# <br />
# 0471<br />
# 07-Apr-10p<br />
# 1<br />
# <br />
# <!-- Coefficients for Owens-Millard equation. --><br />
# 0.0000<br />
# 0.0000e+000<br />
# 0.0000<br />
# 0.00e+000<br />
# 0.0000<br />
# 0.0<br />
# <br />
# <br />
# <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and later. --><br />
# 4.9980e-001<br />
# -0.5084<br />
# -2.0487e-003<br />
# <strong> 9.5571e-005</strong><br />
# -1.9119e-006<br />
# 2.5826e+000<br />
# 1.92630e-004<br />
# -4.64800e-002<br />
# 3.6000e-002<br />
# 1.0100<br />
# </p>
<h1>-3.3000e-002</h1>
<p><br />
# </p>
<h2>5.0000e+003</h2>
<p><br />
# </p>
<h3>1.4500e+003</h3>
<p><br />
# <br />
# <br />
# <br />
# <br />
# <!-- A/D voltage 1, Fluorometer, WET Labs CDOM --><br />
# <br />
# WSCD-1178<br />
# 7 Apr 2010<br />
# 63.200<br />
# 0.070<br />
# <br />
# <br />
# <br />
# <!-- A/D voltage 2, pH --><br />
# <br />
# 270135<br />
# 18 Mar 2010<br />
# 4.6237<br />
# 2.5090<br />
# <br />
# <br />
# <br />
# <!-- A/D voltage 3, Oxidation Reduction Potential --><br />
# <br />
# 270135<br />
# 30 Mar 2009<br />
# <strong>2.498000</strong><br />
# -0.494500<br />
# 0.0<br />
# <br />
# <br />
# <br />
# <!-- A/D voltage 4, Transmissometer, Chelsea/Seatech/WET Lab CStar --><br />
# <br />
# CST-268PR<br />
# 25 Mar 2010<br />
# 21.2179<br />
# <strong>-1.2519</strong><br />
# 0.250<br />
# <br />
# <br />
# <br />
# <!-- A/D voltage 5, Fluorometer, WET Labs WETstar --><br />
# <br />
# WS3S-553P<br />
# 7 Apr 2010<br />
# 15.000<br />
# 0.066<br />
# <br />
# <br />
# <br />
# <!-- A/D voltage 6, Altimeter --><br />
# <br />
# 802<br />
# 20 MAR2004<br />
# 15.000<br />
# 0.000<br />
# <br />
# <br />
# <br />
# <!-- A/D voltage 7, PAR/Irradiance, Biospherical/Licor --><br />
# <br />
# 4554<br />
# 23 Feb 2010<br />
# 1.00000000<br />
# <strong>0.00000000</strong><br />
# 2994011976.00000000<br />
# 1.00000000<br />
# -0.50320676<br />
# <br />
# <br />
# <br />
# <!-- SPAR voltage, Unavailable --><br />
# <br />
# <br />
# <!-- SPAR voltage, SPAR/Surface Irradiance --><br />
# <br />
# 20255<br />
# 7-27-06<br />
# 1796.88720329<br />
# 1.00000000<br />
# <br />
# <br />
#<br />
# datcnv_date = Oct 07 2010 10:59:51, 7.20f<br />
# datcnv_in = C:SeasaveRawCTD_2010Sterner_OctCD1_01.hex C:SeasaveRawCTD_2010Sterner_OctCD1_01.XMLCON<br />
# datcnv_skipover = 0<br />
# datcnv_ox_hysteresis_correction = yes<br />
# datcnv_ox_tau_correction = yes<br />
# file_type = ascii<br />
*END*<br />
</p>
<p> </p>
from Cruise: BH09-SINC1 <p>* Sea-Bird SBE 9 Data File:<br />
* FileName = C:SeasaveRawCTD_2009Sterner Nov 2009CB-1.dat<br />
* Software Version Seasave Win32 V 5.37d<br />
* Temperature SN = 2723<br />
* Conductivity SN = 2271<br />
* Number of Bytes Per Scan = 34<br />
* Number of Voltage Words = 5<br />
* Number of Scans Averaged by the Deck Unit = 1<br />
* System UpLoad Time = Nov 11 2009 10:41:22<br />
* NMEA Latitude = 46 46.90 N<br />
* NMEA Longitude = 090 16.20 W<br />
* NMEA UTC (Time) = Nov 11 2009 16:37:34<br />
* Store Lat/Lon Data = Append to Every Scan<br />
** Ship: <br />
** Cruise: <br />
** Station: <br />
** Latitude: <br />
** Longitude: <br />
# nquan = 17<br />
# nvalues = 16550 <br />
# units = specified<br />
# name 0 = prDM: Pressure, Digiquartz [db]<br />
# name 1 = t090C: Temperature [ITS-90, deg C]<br />
# name 2 = c0uS/cm: Conductivity [uS/cm]<br />
# name 3 = specc: Specific Conductance [uS/cm]<br />
# name 4 = xmiss: Beam Transmission, Chelsea/Seatech/Wetlab CStar [%]<br />
# name 5 = wetStar: Fluorescence, Wetlab Wetstar [mg/m^3]<br />
# name 6 = dz/dtM: Descent Rate [m/s]<br />
# name 7 = ph: pH<br />
# name 8 = par: PAR/Irradiance, Biospherical/Licor<br />
# name 9 = sal00: Salinity [PSU]<br />
# name 10 = sbeox0Mm/Kg: Oxygen, SBE 43 [umol/Kg]<br />
# name 11 = sbeox0Mg/L: Oxygen, SBE 43 [mg/l]<br />
# name 12 = wetCDOM: Fluorescence, Wetlab CDOM [mg/m^3]<br />
# name 13 = latitude: Latitude [deg]<br />
# name 14 = longitude: Longitude [deg]<br />
# name 15 = scan: Scan Count<br />
# name 16 = flag: 0.000e+00<br />
# span 0 = 0.057, 94.846 <br />
# span 1 = 5.6278, 7.1234 <br />
# span 2 = 61.724951, 65.099069 <br />
# span 3 = 99.777, 101.593 <br />
# span 4 = 14.1542, 95.3706 <br />
# span 5 = 1.0729, 4.6682 <br />
# span 6 = -1.114, 0.872 <br />
# span 7 = 10.913, 12.055 <br />
# span 8 = 4.2071e+00, 7.9343e+03 <br />
# span 9 = 0.0451, 0.0463 <br />
# span 10 = 256.933, 314.379 <br />
# span 11 = 8.22124, 10.05935 <br />
# span 12 = 1.1262, 2.3707 <br />
# span 13 = 46.78166, 46.78380 <br />
# span 14 = -90.27012, -90.26912 <br />
# span 15 = 1, 16550 <br />
# span 16 = 0.0000e+00, 0.0000e+00 <br />
# interval = seconds: 0.0416667 <br />
# start_time = Nov 11 2009 10:41:22<br />
# bad_flag = -9.990e-29<br />
# sensor 0 = Frequency 0 temperature, 2723, 12 Feb 2009<br />
# sensor 1 = Frequency 1 conductivity, 2271, 10 Feb 2009, cpcor = -9.5700e-08<br />
# sensor 2 = Frequency 2 pressure, 75869, 31 Mar 2009<br />
# sensor 3 = Extrnl Volt 0 Oxygen, SBE, primary, 0471, 06 Feb 2009<br />
# sensor 4 = Extrnl Volt 1 WET Labs, CDOM<br />
# sensor 5 = Extrnl Volt 2 pH, 270135, 30 Mar 2009<br />
# sensor 6 = Extrnl Volt 3 oxidation reduction potential, 270135, 30 Mar 2009<br />
# sensor 7 = Extrnl Volt 4 transmissometer, primary, CST-268PR, 25 Mar 2009<br />
# sensor 8 = Extrnl Volt 5 WET Labs, WETStar fluorometer, 10 Mar 2009<br />
# sensor 9 = Extrnl Volt 6 altimeter<br />
# sensor 10 = Extrnl Volt 7 irradiance (PAR), primary, 4554, 18 Mar 2009<br />
# sensor 11 = Extrnl Volt 9 surface irradiance (SPAR), degrees = 0.0<br />
# datcnv_date = Nov 11 2009 19:34:19, 5.37e<br />
# datcnv_in = C:SeasaveRawCTD_2009Sterner Nov 2009CB-1.dat C:SeasaveRawCTD_2009Sterner Nov 2009CB-1.CON<br />
# datcnv_skipover = 0<br />
# file_type = ascii<br />
*END*</p>
Specified by the Principal Investigator(s)
<p><strong>BCO-DMO Processing Notes</strong><br />
- Generated from original .asc and .xlxs (SINC 6) files contributed by Bob Sterner<br />
- Upcast data removed from original files<br />
- Awk written to reformat original files<br />
- AWK: SINC[x]_CTDasc_2_BCODMO.awk<br />
- Header data (parameter names) for CTD data generated from .hdr files<br />
- Space delimited reformatted to tab delimited<br />
- All records with "#" or "*" ignored<br />
- Blank lines ignored<br />
- BCO-DMO header o/p from routine<br />
- Parameter "sbeox0_Mn" corrected to "sbeox0_Mm" 20July2012/srg<br />
- Dataset generated with parameters common to all cruises 20July2012/srg</p>
<p>Second set of files:<br />
-variable names changed to normalize to BCO-DMO standards<br />
-units included for all variables<br />
- station "michipictoen" lat/lon updated using the ctd&nbsp;lat lon value</p>
from Cruise: BH10-01 <p>These data have not been processed</p>
from Cruise: BH10-06 <p>These data have not been processed</p>
from Cruise: BH10-13 <p>These data have not been processed</p>
from Cruise: BH10-22 <p>These data have not been processed</p>
Specified by the Principal Investigator(s)
asNeeded
7.x-1.1
Biological and Chemical Oceanography Data Management Office (BCO-DMO)
Unavailable
508-289-2009
WHOI MS#36
Woods Hole
MA
02543
USA
info@bco-dmo.org
http://www.bco-dmo.org
Monday - Friday 8:00am - 5:00pm
For questions regarding this resource, please contact BCO-DMO via the email address provided.
pointOfContact
CTD Sea-Bird SBE 911plus
CTD Sea-Bird SBE 911plus
PI Supplied Instrument Name: CTD Sea-Bird SBE 911plus Instrument Name: CTD Sea-Bird SBE 911plus Instrument Short Name:CTD SBE 911plus Instrument Description: The Sea-Bird SBE 911 plus is a type of CTD instrument package for continuous measurement of conductivity, temperature and pressure. The SBE 911 plus includes the SBE 9plus Underwater Unit and the SBE 11plus Deck Unit (for real-time readout using conductive wire) for deployment from a vessel. The combination of the SBE 9 plus and SBE 11 plus is called a SBE 911 plus. The SBE 9 plus uses Sea-Bird's standard modular temperature and conductivity sensors (SBE 3 plus and SBE 4). The SBE 9 plus CTD can be configured with up to eight auxiliary sensors to measure other parameters including dissolved oxygen, pH, turbidity, fluorescence, light (PAR), light transmission, etc.). more information from Sea-Bird Electronics Community Standard Description: http://vocab.nerc.ac.uk/collection/L22/current/TOOL0058/
wetstar WSCD
wetstar WSCD
PI Supplied Instrument Name: wetstar WSCD PI Supplied Instrument Description:Wetlabs Wetstar WSCD Instrument Name: Fluorometer Instrument Short Name:Fluorometer Instrument Description: A fluorometer or fluorimeter is a device used to measure parameters of fluorescence: its intensity and wavelength distribution of emission spectrum after excitation by a certain spectrum of light. The instrument is designed to measure the amount of stimulated electromagnetic radiation produced by pulses of electromagnetic radiation emitted into a water sample or in situ. Community Standard Description: http://vocab.nerc.ac.uk/collection/L05/current/113/
Wetstar WS3S
Wetstar WS3S
PI Supplied Instrument Name: Wetstar WS3S PI Supplied Instrument Description:Wetlabs Wetstar WS3S Instrument Name: Fluorometer Instrument Short Name:Fluorometer Instrument Description: A fluorometer or fluorimeter is a device used to measure parameters of fluorescence: its intensity and wavelength distribution of emission spectrum after excitation by a certain spectrum of light. The instrument is designed to measure the amount of stimulated electromagnetic radiation produced by pulses of electromagnetic radiation emitted into a water sample or in situ. Community Standard Description: http://vocab.nerc.ac.uk/collection/L05/current/113/
Biospherical QSP-200L
Biospherical QSP-200L
PI Supplied Instrument Name: Biospherical QSP-200L Instrument Name: Photosynthetically Available Radiation Sensor Instrument Short Name:PAR sensor Instrument Description: A PAR sensor measures photosynthetically available (or active) radiation. The sensor measures photon flux density (photons per second per square meter) within the visible wavelength range (typically 400 to 700 nanometers). PAR gives an indication of the total energy available to plants for photosynthesis. This instrument name is used when specific type, make and model are not known. Community Standard Description: http://vocab.nerc.ac.uk/collection/L05/current/122/
SBE 4C
SBE 4C
PI Supplied Instrument Name: SBE 4C Instrument Name: Salinity Sensor Instrument Short Name:Salinity Sensor Instrument Description: Category of instrument that simultaneously measures electrical conductivity and temperature in the water column to provide temperature and salinity data. Community Standard Description: http://vocab.nerc.ac.uk/collection/L05/current/350/
SBE 43 Dissolved Oxygen Sensor
SBE 43 Dissolved Oxygen Sensor
PI Supplied Instrument Name: SBE 43 Dissolved Oxygen Sensor PI Supplied Instrument Description:SBE 43 Instrument Name: Sea-Bird SBE 43 Dissolved Oxygen Sensor Instrument Short Name:SBE-43 DO Instrument Description: The Sea-Bird SBE 43 dissolved oxygen sensor is a redesign of the Clark polarographic membrane type of dissolved oxygen sensors. more information from Sea-Bird Electronics Community Standard Description: http://vocab.nerc.ac.uk/collection/L22/current/TOOL0036/
SBE 3+
SBE 3+
PI Supplied Instrument Name: SBE 3+ Instrument Name: Sea-Bird SBE-3 Temperature Sensor Instrument Short Name:SBE-3 Temperature Instrument Description: The SBE-3 is a slow response, frequency output temperature sensor manufactured by Sea-Bird Electronics, Inc. (Bellevue, Washington, USA). It has an initial accuracy of +/- 0.001 degrees Celsius with a stability of +/- 0.002 degrees Celsius per year and measures seawater temperature in the range of -5.0 to +35 degrees Celsius. more information from Sea-Bird Electronics Community Standard Description: http://vocab.nerc.ac.uk/collection/L05/current/134/
PI Supplied Instrument Name: Instrument Name: Transmissometer Instrument Short Name:Transmissometer Instrument Description: A transmissometer measures the beam attenuation coefficient of the lightsource over the instrument's path-length. This instrument designation is used when specific manufacturer, make and model are not known. Community Standard Description: http://vocab.nerc.ac.uk/collection/L05/current/124/
SBE 9+
SBE 9+
PI Supplied Instrument Name: SBE 9+ Instrument Name: Water Depth Logger Instrument Short Name: Instrument Description: For measuring and recording water levels in rivers, streams, and wells.
Cruise: BH10-01
BH10-01
R/V Blue Heron
Community Standard Description
International Council for the Exploration of the Sea
R/V Blue Heron
vessel
BH10-01
Dr Robert W. Sterner
University of Minnesota Twin Cities
http://bcodata.whoi.edu/LaurentianGreatLakes_Chemistry/BH10-01_SINC5_synopsis.pdf
Report describing BH10-01
Cruise: BH10-06
BH10-06
R/V Blue Heron
Community Standard Description
International Council for the Exploration of the Sea
R/V Blue Heron
vessel
BH10-06
Dr Robert W. Sterner
Bowling Green State University
http://bcodata.whoi.edu/LaurentianGreatLakes_Chemistry/BH10-06_SINC6_synopsis.pdf
Report describing BH10-06
Cruise: BH10-13
BH10-13
R/V Blue Heron
Community Standard Description
International Council for the Exploration of the Sea
R/V Blue Heron
vessel
BH10-13
George S. Bullerjahn
Bowling Green State University
http://bcodata.whoi.edu/LaurentianGreatLakes_Chemistry/BH10-13_SINC10_synopsis.pdf
Report describing BH10-13
Cruise: BH10-22
BH10-22
R/V Blue Heron
Community Standard Description
International Council for the Exploration of the Sea
R/V Blue Heron
vessel
BH10-22
Dr Robert W. Sterner
University of Minnesota Twin Cities
http://bcodata.whoi.edu/LaurentianGreatLakes_Chemistry/BH10-22_SINC11_synopsis.pdf
Report describing BH10-22
Cruise: BH09-SINC1
BH09-SINC1
R/V Blue Heron
Community Standard Description
International Council for the Exploration of the Sea
R/V Blue Heron
vessel
BH09-SINC1
Dr Robert W. Sterner
University of Minnesota Twin Cities
http://bcodata.whoi.edu/LaurentianGreatLakes_Chemistry/BH09-SINC1_Cruise_synopsis.pdf
Report describing BH09-SINC1
Cruise: BH11-01
BH11-01
R/V Blue Heron
Community Standard Description
International Council for the Exploration of the Sea
R/V Blue Heron
vessel
BH11-01
Dr Robert W. Sterner
University of Minnesota Twin Cities
Cruise: BH11-14
BH11-14
R/V Blue Heron
Community Standard Description
International Council for the Exploration of the Sea
R/V Blue Heron
vessel
BH11-14
Dr Robert W. Sterner
University of Minnesota Twin Cities
Cruise: BH12-20
BH12-20
R/V Blue Heron
Community Standard Description
International Council for the Exploration of the Sea
R/V Blue Heron
vessel
BH12-20
Dr Robert W. Sterner
University of Minnesota Twin Cities
Cruise: BH12-10
BH12-10
R/V Blue Heron
Community Standard Description
International Council for the Exploration of the Sea
R/V Blue Heron
vessel
BH12-10
Dr Robert W. Sterner
University of Minnesota Twin Cities
R/V Blue Heron
Community Standard Description
International Council for the Exploration of the Sea
R/V Blue Heron
vessel