http://lod.bco-dmo.org/id/dataset/3728
eng; USA
utf8
dataset
Highest level of data collection, from a common set of sensors or instrumentation, usually within the same research project
Biological and Chemical Oceanography Data Management Office (BCO-DMO)
Unavailable
508-289-2009
WHOI MS#36
Woods Hole
MA
02543
USA
info@bco-dmo.org
http://www.bco-dmo.org
Monday - Friday 8:00am - 5:00pm
For questions regarding this resource, please contact BCO-DMO via the email address provided.
pointOfContact
2012-09-24
ISO 19115-2 Geographic Information - Metadata - Part 2: Extensions for Imagery and Gridded Data
ISO 19115-2:2009(E)
CTD data from R/V Atlantis cruise AT18-02 in the Gulf of Mexico Macondo wellhead area in Nov-Dec 2010 (DWH_Deep_Microbes project)
2012-09-24
publication
2012-09-24
revision
BCO-DMO Linked Data URI
2012-09-24
creation
http://lod.bco-dmo.org/id/dataset/3728
Samantha B. Joye
University of Georgia
principalInvestigator
Biological and Chemical Oceanography Data Management Office (BCO-DMO)
Unavailable
508-289-2009
WHOI MS#36
Woods Hole
MA
02543
USA
info@bco-dmo.org
http://www.bco-dmo.org
Monday - Friday 8:00am - 5:00pm
For questions regarding this resource, please contact BCO-DMO via the email address provided.
publisher
Cite this dataset as: Joye, S. B. (2012) CTD data from R/V Atlantis cruise AT18-02 in the Gulf of Mexico Macondo wellhead area in Nov-Dec 2010 (DWH_Deep_Microbes project). Biological and Chemical Oceanography Data Management Office (BCO-DMO). (Version 1) Version Date 2012-09-24 [if applicable, indicate subset used]. http://lod.bco-dmo.org/id/dataset/3728 [access date]
CTD data from cruise AT18-02 in the Gulf of Mexico, Nov-Dec 2010. Dataset Description: <p>CTD data from cruise AT18-02 in the Gulf of Mexico (November 26, 2010 to December 2, 2010).</p> Methods and Sampling: <p>All CTD sensors were calibrated by U Miami or WHOI technicians prior to sailing except the CDOM sensor, which was obtained directly from WETLABS by collaborator V. Asper. That instrument was calibrated by Wetlabs. CTD casts in the vicinity of the Macondo Wellhead were complicated by the presence of oil on the sea surface. A saltwater hose was used to spray the sea surface, parting the oil to create a clean area for the CTD to be dropped through; a similar procedure was used for deployment and recovery.</p>
<p><strong>Header information from Sea-Bird SBE 9 data files:</strong><br />
Software Version Seasave V 7.20f<br />
Temperature SN = 4195; Conductivity SN = 2670<br />
Number of Bytes Per Scan = 37; Number of Voltage Words = 4<br />
Number of Scans Averaged by the Deck Unit = 1<br />
units = specified<br />
<br />
Station 9 (casts 19 and 20):<br />
name 0 = latitude: Latitude [deg]<br />
name 1 = longitude: Longitude [deg]<br />
name 2 = timeS: Time, Elapsed [seconds]<br />
name 3 = prDM: Pressure, Digiquartz [db]<br />
name 4 = depSM: Depth [salt water, m]<br />
name 5 = t090C: Temperature [ITS-90, deg C]<br />
name 6 = t190C: Temperature, 2 [ITS-90, deg C]<br />
name 7 = c0S/m: Conductivity [S/m]<br />
name 8 = c1S/m: Conductivity, 2 [S/m]<br />
name 9 = sal00: Salinity, Practical [PSU]<br />
name 10 = sal11: Salinity, Practical, 2 [PSU]<br />
name 11 = density00: Density [density, Kg/m^3]<br />
name 12 = density11: Density, 2 [density, Kg/m^3]<br />
name 13 = avgsvCM: Average Sound Velocity [Chen-Millero, m/s]<br />
name 14 = sbeox0V: Oxygen raw, SBE 43 [V]<br />
name 15 = sbeox0Mm/Kg: Oxygen, SBE 43 [umol/Kg]<br />
name 16 = oxsatMm/Kg: Oxygen Saturation, Weiss [umol/Kg]<br />
name 17 = xmiss: Beam Transmission, Chelsea/Seatech/WET Labs CStar [%]<br />
name 18 = potemp090C: Potential Temperature [ITS-90, deg C]<br />
name 19 = potemp190C: Potential Temperature, 2 [ITS-90, deg C]<br />
name 20 = flECO-AFL: Fluorescence, WET Labs ECO-AFL/FL [mg/m^3]<br />
name 21 = turbWETntu0: Turbidity, WET Labs ECO [NTU]<br />
name 22 = wetCDOM: Fluorescence, WET Labs CDOM [mg/m^3]<br />
name 23 = flCUVA: Fluorescence, Chelsea UV Aquatracka [ug/l]<br />
name 24 = flScufa: Fluorescence, Turner SCUFA [ppb]<br />
name 25 = altM: Altimeter [m]<br />
name 26 = nbf: Bottles Fired<br />
name 27 = modError: Modulo Error Count<br />
interval = decibars: 1; bad_flag = -9.990e-29; Sensors count=13<br />
<br />
Cast 21:<br />
name 0 = scan: Scan Count<br />
name 1 = latitude: Latitude [deg]<br />
name 2 = longitude: Longitude [deg]<br />
name 3 = nbf: Bottles Fired<br />
name 4 = depSM: Depth [salt water, m]<br />
name 5 = t090C: Temperature [ITS-90, deg C]<br />
name 6 = t190C: Temperature, 2 [ITS-90, deg C]<br />
name 7 = sal00: Salinity, Practical [PSU]<br />
name 8 = sal11: Salinity, Practical, 2 [PSU]<br />
name 9 = sbeox0Mg/L: Oxygen, SBE 43 [mg/l]<br />
name 10 = sbeox0PS: Oxygen, SBE 43 [% saturation]<br />
name 11 = density00: Density [density, Kg/m^3]<br />
name 12 = sigma-é00: Density [sigma-theta, Kg/m^3]<br />
name 13 = bat: Beam Attenuation, Chelsea/Seatech/WET Labs CStar [1/m]<br />
name 14 = xmiss: Beam Transmission, Chelsea/Seatech/WET Labs CStar [%]<br />
name 15 = flECO-AFL: Fluorescence, WET Labs ECO-AFL/FL [mg/m^3]<br />
name 16 = wetCDOM: Fluorescence, WET Labs CDOM [mg/m^3]<br />
name 17 = flCUVA: Fluorescence, Chelsea UV Aquatracka [ug/l]<br />
name 18 = prDM: Pressure, Digiquartz [db]<br />
name 19 = turbWETntu0: Turbidity, WET Labs ECO [NTU]<br />
name 20 = flag:&nbsp; 0.000e+00&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<br />
interval = seconds: 0.0416667; bad_flag = -9.990e-29; Sensors count=13<br />
<br />
Casts 22 through 26:<br />
name 0 = scan: Scan Count<br />
name 1 = latitude: Latitude [deg]<br />
name 2 = longitude: Longitude [deg]<br />
name 3 = t190C: Temperature, 2 [ITS-90, deg C]<br />
name 4 = t090C: Temperature [ITS-90, deg C]<br />
name 5 = sal00: Salinity, Practical [PSU]<br />
name 6 = sal11: Salinity, Practical, 2 [PSU]<br />
name 7 = potemp090C: Potential Temperature [ITS-90, deg C]<br />
name 8 = depSM: Depth [salt water, m]<br />
name 9 = c0S/m: Conductivity [S/m]<br />
name 10 = bat: Beam Attenuation, Chelsea/Seatech/WET Labs CStar [1/m]<br />
name 11 = xmiss: Beam Transmission, Chelsea/Seatech/WET Labs CStar [%]<br />
name 12 = nbf: Bottles Fired<br />
name 13 = density00: Density [density, Kg/m^3]<br />
name 14 = sigma-é00: Density [sigma-theta, Kg/m^3]<br />
name 15 = flECO-AFL: Fluorescence, WET Labs ECO-AFL/FL [mg/m^3]<br />
name 16 = wetCDOM: Fluorescence, WET Labs CDOM [mg/m^3]<br />
name 17 = flCUVA: Fluorescence, Chelsea UV Aquatracka [ug/l]<br />
name 18 = sbeox0Mg/L: Oxygen, SBE 43 [mg/l]<br />
name 19 = sbeox0PS: Oxygen, SBE 43 [% saturation]<br />
name 20 = prDM: Pressure, Digiquartz [db]<br />
name 21 = flag:&nbsp; 0.000e+00&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<br />
interval = seconds: 0.0416667; bad_flag = -9.990e-29; Sensors count=13<br />
<br />
sensor channel 1 = Frequency 0, Temperature; Sensor ID: 55; SerialNumber: 4195<br />
Calibration Date: 23-Jan-10<br />
<br />
sensor channel 2 = Frequency 1, Conductivity; Sensor ID: 3; Serial Number: 2670<br />
Calibration Date: 12-Jan-10<br />
<br />
sensor channel 3 = Frequency 2, Pressure, Digiquartz with TC; Sensor ID: 45; Serial Number: 63505 SBE090462<br />
Calibration Date: 12/23/2002<br />
<br />
sensor channel 4 = Frequency 3, Temperature, 2; Sensor ID: 55; Serial Number: 4481<br />
Calibration Date: 12-Jan-10<br />
<br />
sensor channel 5 = Frequency 4, Conductivity, 2; Sensor ID: 3; Serial Number: 2880<br />
Calibration Date: 12-Jan-10<br />
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<br />
sensor channel 6 = A/D voltage 0, Fluorometer, WET Labs ECO-AFL/FL; Sensor ID: 20 SerialNumber: FLNTURTD-FL-1012<br />
Calibration Date: 2008-04-18<br />
<br />
sensor channel 7 = A/D voltage 1, Turbidity Meter, WET Labs, ECO-NTU;&nbsp; Sensor ID: 67; Serial Number: FLNTURTD-1012<br />
Calibration Date: 2008-04-18<br />
<br />
sensor channel 8 = A/D voltage 2, Fluorometer, WET Labs CDOM; Sensor ID: 19; Serial Number: FLCDRTD-1379<br />
Calibration Date: 4/14/2010<br />
<br />
sensor channel 9 = A/D voltage 3, Fluorometer, Turner SCUFA; Sensor ID: 17; Serial Number: 201011<br />
Calibration Date: 2010-Aug-18<br />
<br />
sensor channel 10 = A/D voltage 4, Altimeter; Sensor ID: 0; Serial Number PSA916-1162<br />
Calibration Date: (blank)<br />
<br />
sensor channel 11 = A/D voltage 5, Oxygen, SBE 43; Sensor ID: 38; Serial Number: 0723<br />
Calibration Date: 12-Feb-10<br />
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<br />
sensor channel 12 = A/D voltage 6, Transmissometer, Chelsea/Seatech/WET Lab CStar; Sensor ID: 59 Serial Number: CST-1118DR<br />
Calibration Date: 2008-04-30<br />
<br />
sensor channel 13 = A/D voltage 7, Fluorometer, Chelsea UV Aquatracka; Sensor ID: 7; Serial Number: 107733001<br />
Calibration Date: 2010-8-18<br />
----</p>
Funding provided by NSF Division of Ocean Sciences (NSF OCE) Award Number: OCE-1043225 Award URL: https://www.nsf.gov/awardsearch/show-award?AWD_ID=1043225
completed
Samantha B. Joye
University of Georgia
706-542-5893
Dept. of Marine Sciences 325 Sanford Drive
Athens
GA
30602
USA
mjoye@uga.edu
pointOfContact
asNeeded
Dataset Version: 1
Unknown
cast
event
date_start_utc
time_start_utc
lat_start
lon_start
lat
lon
time_elapsed
press
depth
temp
temp2
cond
cond2
sal
sal2
density
density2
sigma_0
O2_sat_pcnt
O2_v
O2_mg_L
O2_umol_kg_SBE
O2_umol_kg_W
trans
beam_c
potemp
potemp2
fluor_ug_L
turbidity
CDOM
chl_a_fluor
fluor_ppb
alt
sound_vel_avg
bottles_fired
error_count
CTD Sea-Bird 9
theme
None, User defined
cast
event
date begin
time_start
latitude at start time of measurement
longitude at start time of measurement
latitude
longitude
time_elapsed
water pressure
depth
water temperature at measurement depth
temperature (temp2) from secondary sensor
conductivity
conductivity from the CTD secondary sensor
salinity
salinity calculated from the CTD secondary sensors
density
sigma-theta
Dissolved oxygen (percent)
Oxygen in volts
Dissolved_Oxygen
dissolved Oxygen
transmission
beam_c
potential temperature
potemp2
fluorescence
turbidity
colored or chromophoric dissolved organic matter
chlorophyll-a; fluorometric method
No BCO-DMO term
altitude
sound velocity
featureType
BCO-DMO Standard Parameters
CTD Sea-Bird 9
instrument
BCO-DMO Standard Instruments
AT18-02
service
Deployment Activity
Gulf of Mexico Macondo wellhead area 28N 88W, 1500 m
place
Locations
otherRestrictions
otherRestrictions
Access Constraints: none. Use Constraints: Please follow guidelines at: http://www.bco-dmo.org/terms-use Distribution liability: Under no circumstances shall BCO-DMO be liable for any direct, incidental, special, consequential, indirect, or punitive damages that result from the use of, or the inability to use, the materials in this data submission. If you are dissatisfied with any materials in this data submission your sole and exclusive remedy is to discontinue use.
Gulf of Mexico - Deepwater Horizon Oil Spill
https://osprey.bco-dmo.org/program/2028
Gulf of Mexico - Deepwater Horizon Oil Spill
Grants for Rapid Response Research (RAPID)
The RAPID funding mechanism is used for proposals having a severe urgency with regard to availability of, or access to data, facilities or specialized equipment, including quick-response research on natural or anthropogenic disasters and similar unanticipated events.
GOM - Broader Impacts
The need to understand the impact of this largest oil spill to date on ecosystems and biochemical cycling is self evident. The consequences of the disaster and accompanying clean up measures (e.g. the distribution of dispersants) need to be evaluated to guide further mediating measures and to develop and improve responses to similar disasters in the future. Would it be advantageous if such oil aggregates sink, or should it rather remain suspended? Possibly measures can be developed to enhance sinking or suspension (e.g. addition of ballast minerals) once we understand their current formation and fate. Understanding the particle dynamics following the input of large amounts of oil and dispersants into the water is a prerequisite to develop response strategies for now and in the future.
GoMX - DHOS
largerWorkCitation
program
RAPID Deepwater Horizon Oil Spill: Deep pelagic and benthic impacts of the oil spill
https://osprey.bco-dmo.org/project/2234
RAPID Deepwater Horizon Oil Spill: Deep pelagic and benthic impacts of the oil spill
<p>During late spring and summer of 2010, the Northern Gulf of Mexico (GoM) was exposed to an oil spill different in magnitude and scope from any previous spill. The Deepwater Horizon, an ultra-deep, offshore drilling platform, began working GoM oil fields in 2001. While working a well in Mississippi Canyon on April 20, 2010, a bolus of methane gas ascended the drill pipe and exploded at the surface. Two days later the platform sank and since then, substantial quantities of oil and gas have leaked from the damaged wellhead. This work addressed the offshore oceanic impacts of the BP spill.</p>
<p>Sediment microbial mediated processes are capable of oxidizing oil and methane in the environment. The PI's examined the impacts of the Deepwater Horizon Oil Spill on microbially mediated processes in the deep waters and sediments in the vicinity of the spill site. The work complemented several funded or planned geochemical and microbiological sampling programs focused on the oil spill response. PI's evaluated rates of water column methane oxidation and sediment sulfate reduction and methanogenesis at multiple sites around the spill site. Additional experiments quantified the impact of nutrients, oxygen and substrate concentrations on these important microbially mediated processes.</p>
<p>The Joye group participated in six research cruises during 2010 and received samples from another six cruises from the study area. On all cruises, water samples were collected using a CTD rosette and Niskin or Go-Flo bottles. Sediment samples were obtained by box coring, multi-coring, or using the manned submersible ALVIN.</p>
<p>The PI's extended the monitoring/assessment program that was initiated through the NOAA National Institute of Undersea Science and Technology (NIUST) funded cruise and further leveraged by NOAA/NIUST (cruises in July 2010, October 2010) by conducting three major expeditions in 2010. This RAPID project directly supported the PI's efforts for cruises in May/June 2010 (NSF Joye chief scientist); August 2010 (NSF Montoya, chief scientist); November/December 2010 (NSF Joye chief scientist); and July 2011 (NSF Montoya, chief scientist)</p>
DWH_Deep_Microbes
largerWorkCitation
project
eng; USA
oceans
Gulf of Mexico Macondo wellhead area 28N 88W, 1500 m
-90.5683
-88.3097
27.3668
28.8525
2010-11-26
2010-12-02
Gulf of Mexico; 26.9N, 90.7W
0
BCO-DMO catalogue of parameters from CTD data from R/V Atlantis cruise AT18-02 in the Gulf of Mexico Macondo wellhead area in Nov-Dec 2010 (DWH_Deep_Microbes project)
Biological and Chemical Oceanography Data Management Office (BCO-DMO)
Unavailable
508-289-2009
WHOI MS#36
Woods Hole
MA
02543
USA
info@bco-dmo.org
http://www.bco-dmo.org
Monday - Friday 8:00am - 5:00pm
For questions regarding this resource, please contact BCO-DMO via the email address provided.
pointOfContact
http://lod.bco-dmo.org/id/dataset-parameter/29739.rdf
Name: cast
Units: unitless
Description: <p>Consecutive cast number of the instrument.</p>
http://lod.bco-dmo.org/id/dataset-parameter/29740.rdf
Name: event
Units: unitless
Description: <p>Unique event number. The first one or two digits (before the decimal) are the station number.</p>
http://lod.bco-dmo.org/id/dataset-parameter/29741.rdf
Name: date_start_utc
Units: unitless
Description: <p>Date at start of CTD cast; UTC. format: mm/dd/YYYY</p>
http://lod.bco-dmo.org/id/dataset-parameter/29742.rdf
Name: time_start_utc
Units: unitless
Description: <p>Time at start of CTD cast; 24-hour clock; UTC; in hours and decimal minutes. format: HHMM.mm</p>
http://lod.bco-dmo.org/id/dataset-parameter/29743.rdf
Name: lat_start
Units: decimal degrees
Description: <p>Latitude at start of cast; postive values = North.</p>
http://lod.bco-dmo.org/id/dataset-parameter/29744.rdf
Name: lon_start
Units: decimal degrees
Description: <p>Longitude at start of cast; negative values = West.</p>
http://lod.bco-dmo.org/id/dataset-parameter/29745.rdf
Name: lat
Units: decimal degrees
Description: <p>Latitude; postive values = North.</p>
http://lod.bco-dmo.org/id/dataset-parameter/29746.rdf
Name: lon
Units: decimal degrees
Description: <p>Longitude; negative values = West.</p>
http://lod.bco-dmo.org/id/dataset-parameter/29747.rdf
Name: time_elapsed
Units: seconds
Description: <p>Number of seconds elapsed from the start of the cast. Originally named 'timeS'.</p>
http://lod.bco-dmo.org/id/dataset-parameter/29748.rdf
Name: press
Units: decibars
Description: <p>Pressure. Originally named 'prDM'.</p>
http://lod.bco-dmo.org/id/dataset-parameter/29749.rdf
Name: depth
Units: meters
Description: <p>Depth. Originally named 'depSM'.</p>
http://lod.bco-dmo.org/id/dataset-parameter/29750.rdf
Name: temp
Units: degrees Celsius
Description: <p>Primary temperature measurement. Originally named 'T090C'.</p>
http://lod.bco-dmo.org/id/dataset-parameter/29751.rdf
Name: temp2
Units: degrees Celsius
Description: <p>Secondary tempearture measurement. Originally named 'T190C'.</p>
http://lod.bco-dmo.org/id/dataset-parameter/29752.rdf
Name: cond
Units: S/m
Description: <p>Primary conductivity measurement in Siemens per meter. Originally named 'c0S/m'.</p>
http://lod.bco-dmo.org/id/dataset-parameter/29753.rdf
Name: cond2
Units: S/m
Description: <p>Primary conductivity measurement in Siemens per meter. Originally named 'c1S/m'.</p>
http://lod.bco-dmo.org/id/dataset-parameter/29754.rdf
Name: sal
Units: PSU
Description: <p>Primary salinity measurement. Originally named 'Sal00'.</p>
http://lod.bco-dmo.org/id/dataset-parameter/29755.rdf
Name: sal2
Units: PSU
Description: <p>Secondary salinity measurement. Originally named 'Sal11'.</p>
http://lod.bco-dmo.org/id/dataset-parameter/29756.rdf
Name: density
Units: kg/m^3
Description: <p>Primary measure of density in kilograms per cubic meter.</p>
http://lod.bco-dmo.org/id/dataset-parameter/29757.rdf
Name: density2
Units: kg/m^3
Description: <p>Secondary measure of density in kilograms per cubic meter.</p>
http://lod.bco-dmo.org/id/dataset-parameter/29758.rdf
Name: sigma_0
Units: kg/m^3
Description: <p>Sigma theta density. Orignally named 'Sigma-e00'.</p>
http://lod.bco-dmo.org/id/dataset-parameter/29759.rdf
Name: O2_sat_pcnt
Units: %
Description: <p>Percent oxygen saturation. Originally named 'Sbeox0PS'.</p>
http://lod.bco-dmo.org/id/dataset-parameter/29760.rdf
Name: O2_v
Units: volts
Description: <p>Raw voltage from SBE43 oxygen sensor. Originally named 'Sbeox0V'.</p>
http://lod.bco-dmo.org/id/dataset-parameter/29761.rdf
Name: O2_mg_L
Units: mg/L
Description: <p>Oxygen in milligrams per liter. Originally named 'Sbeox0Mg/L'.</p>
http://lod.bco-dmo.org/id/dataset-parameter/29762.rdf
Name: O2_umol_kg_SBE
Units: umol/kg
Description: <p>Oxygen in micromoles per kilograms measured by SBE43 sensor. Originally named 'Sbeox0Mm/Kg'.</p>
http://lod.bco-dmo.org/id/dataset-parameter/29763.rdf
Name: O2_umol_kg_W
Units: umol/kg
Description: <p>Oxygen in micromoles per kilograms measured by Weiss sensor. Originally named 'oxsatMm/Kg'.</p>
http://lod.bco-dmo.org/id/dataset-parameter/29764.rdf
Name: trans
Units: %
Description: <p>Beam transmission. Originally named 'Xmiss'.</p>
http://lod.bco-dmo.org/id/dataset-parameter/29765.rdf
Name: beam_c
Units: 1/m
Description: <p>Beam attenuation. Originally named 'Bat'.</p>
http://lod.bco-dmo.org/id/dataset-parameter/29766.rdf
Name: potemp
Units: degrees Celsius
Description: <p>Primary measure of potential temperature. Originally named 'potemp090C'.</p>
http://lod.bco-dmo.org/id/dataset-parameter/29767.rdf
Name: potemp2
Units: degrees Celsius
Description: <p>Secondary measure of potential temperature. Originally named 'potemp190C'.</p>
http://lod.bco-dmo.org/id/dataset-parameter/29768.rdf
Name: fluor_ug_L
Units: mg/m^3
Description: <p>Fluorescence measured by WET Labs ECO-AFL/FL in milligrams per cubic meter. Originally named 'flECO-AFL'.</p>
http://lod.bco-dmo.org/id/dataset-parameter/29769.rdf
Name: turbidity
Units: NTU
Description: <p>Turbidity measured by WET Labs ECO. Originally named 'turbWetntu0'.</p>
http://lod.bco-dmo.org/id/dataset-parameter/29770.rdf
Name: CDOM
Units: mg/m^3
Description: <p>CDOM fluoresence in milligrams per cubic meter. Originally named 'wetCDOM'.</p>
http://lod.bco-dmo.org/id/dataset-parameter/29771.rdf
Name: chl_a_fluor
Units: ug/L
Description: <p>Fluorescence measured by Chelsea UV Aquatracka in micrograms per liter. Originally named 'flCUVA'.</p>
http://lod.bco-dmo.org/id/dataset-parameter/29772.rdf
Name: fluor_ppb
Units: ppb
Description: <p>Fluorescence measured by Turner SCUFA in parts per billion. Originally named 'flScufa'.</p>
http://lod.bco-dmo.org/id/dataset-parameter/29773.rdf
Name: alt
Units: meters
Description: <p>Altimeter reading.</p>
http://lod.bco-dmo.org/id/dataset-parameter/29774.rdf
Name: sound_vel_avg
Units: m/s
Description: <p>Average sound velocity in meters per second. Originally named 'avgsvCM'.</p>
http://lod.bco-dmo.org/id/dataset-parameter/29775.rdf
Name: bottles_fired
Units: unitless
Description: <p>Number of bottle fired.</p>
http://lod.bco-dmo.org/id/dataset-parameter/29776.rdf
Name: error_count
Units: unitless
Description: <p>Modulo error count.</p>
GB/NERC/BODC > British Oceanographic Data Centre, Natural Environment Research Council, United Kingdom
Biological and Chemical Oceanography Data Management Office (BCO-DMO)
Unavailable
508-289-2009
WHOI MS#36
Woods Hole
MA
02543
USA
info@bco-dmo.org
http://www.bco-dmo.org
Monday - Friday 8:00am - 5:00pm
For questions regarding this resource, please contact BCO-DMO via the email address provided.
pointOfContact
199961491
https://datadocs.bco-dmo.org/file/0AAMnQmCgvB9y6/AT18-02_CTD.csv
AT18-02_CTD.csv
Primary data file for dataset ID 3728
download
https://osprey.bco-dmo.org/dataset/3728/data/download
download
onLine
dataset
<p>All CTD sensors were calibrated by U Miami or WHOI technicians prior to sailing except the CDOM sensor, which was obtained directly from WETLABS by collaborator V. Asper. That instrument was calibrated by Wetlabs. CTD casts in the vicinity of the Macondo Wellhead were complicated by the presence of oil on the sea surface. A saltwater hose was used to spray the sea surface, parting the oil to create a clean area for the CTD to be dropped through; a similar procedure was used for deployment and recovery.</p>
<p><strong>Header information from Sea-Bird SBE 9 data files:</strong><br />
Software Version Seasave V 7.20f<br />
Temperature SN = 4195; Conductivity SN = 2670<br />
Number of Bytes Per Scan = 37; Number of Voltage Words = 4<br />
Number of Scans Averaged by the Deck Unit = 1<br />
units = specified<br />
<br />
Station 9 (casts 19 and 20):<br />
name 0 = latitude: Latitude [deg]<br />
name 1 = longitude: Longitude [deg]<br />
name 2 = timeS: Time, Elapsed [seconds]<br />
name 3 = prDM: Pressure, Digiquartz [db]<br />
name 4 = depSM: Depth [salt water, m]<br />
name 5 = t090C: Temperature [ITS-90, deg C]<br />
name 6 = t190C: Temperature, 2 [ITS-90, deg C]<br />
name 7 = c0S/m: Conductivity [S/m]<br />
name 8 = c1S/m: Conductivity, 2 [S/m]<br />
name 9 = sal00: Salinity, Practical [PSU]<br />
name 10 = sal11: Salinity, Practical, 2 [PSU]<br />
name 11 = density00: Density [density, Kg/m^3]<br />
name 12 = density11: Density, 2 [density, Kg/m^3]<br />
name 13 = avgsvCM: Average Sound Velocity [Chen-Millero, m/s]<br />
name 14 = sbeox0V: Oxygen raw, SBE 43 [V]<br />
name 15 = sbeox0Mm/Kg: Oxygen, SBE 43 [umol/Kg]<br />
name 16 = oxsatMm/Kg: Oxygen Saturation, Weiss [umol/Kg]<br />
name 17 = xmiss: Beam Transmission, Chelsea/Seatech/WET Labs CStar [%]<br />
name 18 = potemp090C: Potential Temperature [ITS-90, deg C]<br />
name 19 = potemp190C: Potential Temperature, 2 [ITS-90, deg C]<br />
name 20 = flECO-AFL: Fluorescence, WET Labs ECO-AFL/FL [mg/m^3]<br />
name 21 = turbWETntu0: Turbidity, WET Labs ECO [NTU]<br />
name 22 = wetCDOM: Fluorescence, WET Labs CDOM [mg/m^3]<br />
name 23 = flCUVA: Fluorescence, Chelsea UV Aquatracka [ug/l]<br />
name 24 = flScufa: Fluorescence, Turner SCUFA [ppb]<br />
name 25 = altM: Altimeter [m]<br />
name 26 = nbf: Bottles Fired<br />
name 27 = modError: Modulo Error Count<br />
interval = decibars: 1; bad_flag = -9.990e-29; Sensors count=13<br />
<br />
Cast 21:<br />
name 0 = scan: Scan Count<br />
name 1 = latitude: Latitude [deg]<br />
name 2 = longitude: Longitude [deg]<br />
name 3 = nbf: Bottles Fired<br />
name 4 = depSM: Depth [salt water, m]<br />
name 5 = t090C: Temperature [ITS-90, deg C]<br />
name 6 = t190C: Temperature, 2 [ITS-90, deg C]<br />
name 7 = sal00: Salinity, Practical [PSU]<br />
name 8 = sal11: Salinity, Practical, 2 [PSU]<br />
name 9 = sbeox0Mg/L: Oxygen, SBE 43 [mg/l]<br />
name 10 = sbeox0PS: Oxygen, SBE 43 [% saturation]<br />
name 11 = density00: Density [density, Kg/m^3]<br />
name 12 = sigma-é00: Density [sigma-theta, Kg/m^3]<br />
name 13 = bat: Beam Attenuation, Chelsea/Seatech/WET Labs CStar [1/m]<br />
name 14 = xmiss: Beam Transmission, Chelsea/Seatech/WET Labs CStar [%]<br />
name 15 = flECO-AFL: Fluorescence, WET Labs ECO-AFL/FL [mg/m^3]<br />
name 16 = wetCDOM: Fluorescence, WET Labs CDOM [mg/m^3]<br />
name 17 = flCUVA: Fluorescence, Chelsea UV Aquatracka [ug/l]<br />
name 18 = prDM: Pressure, Digiquartz [db]<br />
name 19 = turbWETntu0: Turbidity, WET Labs ECO [NTU]<br />
name 20 = flag:&nbsp; 0.000e+00&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<br />
interval = seconds: 0.0416667; bad_flag = -9.990e-29; Sensors count=13<br />
<br />
Casts 22 through 26:<br />
name 0 = scan: Scan Count<br />
name 1 = latitude: Latitude [deg]<br />
name 2 = longitude: Longitude [deg]<br />
name 3 = t190C: Temperature, 2 [ITS-90, deg C]<br />
name 4 = t090C: Temperature [ITS-90, deg C]<br />
name 5 = sal00: Salinity, Practical [PSU]<br />
name 6 = sal11: Salinity, Practical, 2 [PSU]<br />
name 7 = potemp090C: Potential Temperature [ITS-90, deg C]<br />
name 8 = depSM: Depth [salt water, m]<br />
name 9 = c0S/m: Conductivity [S/m]<br />
name 10 = bat: Beam Attenuation, Chelsea/Seatech/WET Labs CStar [1/m]<br />
name 11 = xmiss: Beam Transmission, Chelsea/Seatech/WET Labs CStar [%]<br />
name 12 = nbf: Bottles Fired<br />
name 13 = density00: Density [density, Kg/m^3]<br />
name 14 = sigma-é00: Density [sigma-theta, Kg/m^3]<br />
name 15 = flECO-AFL: Fluorescence, WET Labs ECO-AFL/FL [mg/m^3]<br />
name 16 = wetCDOM: Fluorescence, WET Labs CDOM [mg/m^3]<br />
name 17 = flCUVA: Fluorescence, Chelsea UV Aquatracka [ug/l]<br />
name 18 = sbeox0Mg/L: Oxygen, SBE 43 [mg/l]<br />
name 19 = sbeox0PS: Oxygen, SBE 43 [% saturation]<br />
name 20 = prDM: Pressure, Digiquartz [db]<br />
name 21 = flag:&nbsp; 0.000e+00&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<br />
interval = seconds: 0.0416667; bad_flag = -9.990e-29; Sensors count=13<br />
<br />
sensor channel 1 = Frequency 0, Temperature; Sensor ID: 55; SerialNumber: 4195<br />
Calibration Date: 23-Jan-10<br />
<br />
sensor channel 2 = Frequency 1, Conductivity; Sensor ID: 3; Serial Number: 2670<br />
Calibration Date: 12-Jan-10<br />
<br />
sensor channel 3 = Frequency 2, Pressure, Digiquartz with TC; Sensor ID: 45; Serial Number: 63505 SBE090462<br />
Calibration Date: 12/23/2002<br />
<br />
sensor channel 4 = Frequency 3, Temperature, 2; Sensor ID: 55; Serial Number: 4481<br />
Calibration Date: 12-Jan-10<br />
<br />
sensor channel 5 = Frequency 4, Conductivity, 2; Sensor ID: 3; Serial Number: 2880<br />
Calibration Date: 12-Jan-10<br />
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<br />
sensor channel 6 = A/D voltage 0, Fluorometer, WET Labs ECO-AFL/FL; Sensor ID: 20 SerialNumber: FLNTURTD-FL-1012<br />
Calibration Date: 2008-04-18<br />
<br />
sensor channel 7 = A/D voltage 1, Turbidity Meter, WET Labs, ECO-NTU;&nbsp; Sensor ID: 67; Serial Number: FLNTURTD-1012<br />
Calibration Date: 2008-04-18<br />
<br />
sensor channel 8 = A/D voltage 2, Fluorometer, WET Labs CDOM; Sensor ID: 19; Serial Number: FLCDRTD-1379<br />
Calibration Date: 4/14/2010<br />
<br />
sensor channel 9 = A/D voltage 3, Fluorometer, Turner SCUFA; Sensor ID: 17; Serial Number: 201011<br />
Calibration Date: 2010-Aug-18<br />
<br />
sensor channel 10 = A/D voltage 4, Altimeter; Sensor ID: 0; Serial Number PSA916-1162<br />
Calibration Date: (blank)<br />
<br />
sensor channel 11 = A/D voltage 5, Oxygen, SBE 43; Sensor ID: 38; Serial Number: 0723<br />
Calibration Date: 12-Feb-10<br />
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<br />
sensor channel 12 = A/D voltage 6, Transmissometer, Chelsea/Seatech/WET Lab CStar; Sensor ID: 59 Serial Number: CST-1118DR<br />
Calibration Date: 2008-04-30<br />
<br />
sensor channel 13 = A/D voltage 7, Fluorometer, Chelsea UV Aquatracka; Sensor ID: 7; Serial Number: 107733001<br />
Calibration Date: 2010-8-18<br />
----</p>
Specified by the Principal Investigator(s)
<p>The CTD data were processed on Seasave software version 7.20f as per routine operating procedures.</p>
<p><strong>BCO-DMO made the following modifications:</strong><br />
- Removed duplicate parameters from display.<br />
- Changed parameter names to conform with BCO-DMO conventions.<br />
- Added date_start_utc, time_start_utc, lat_start, and lon_start from the header information in the original CTD files.<br />
- Files named '12.04' were assumed to be be '12.05', based on the event log.</p>
Specified by the Principal Investigator(s)
asNeeded
7.x-1.1
Biological and Chemical Oceanography Data Management Office (BCO-DMO)
Unavailable
508-289-2009
WHOI MS#36
Woods Hole
MA
02543
USA
info@bco-dmo.org
http://www.bco-dmo.org
Monday - Friday 8:00am - 5:00pm
For questions regarding this resource, please contact BCO-DMO via the email address provided.
pointOfContact
CTD Sea-Bird 9
CTD Sea-Bird 9
PI Supplied Instrument Name: CTD Sea-Bird 9 Instrument Name: CTD Sea-Bird 9 Instrument Short Name:CTD SBE 9 Instrument Description: The Sea-Bird SBE 9 is a type of CTD instrument package. The SBE 9 is the Underwater Unit and is most often combined with the SBE 11 Deck Unit (for real-time readout using conductive wire) when deployed from a research vessel. The combination of the SBE 9 and SBE 11 is called a SBE 911. The SBE 9 uses Sea-Bird's standard modular temperature and conductivity sensors (SBE 3 and SBE 4). The SBE 9 CTD can be configured with auxiliary sensors to measure other parameters including dissolved oxygen, pH, turbidity, fluorometer, altimeter, etc.). Note that in most cases, it is more accurate to specify SBE 911 than SBE 9 since it is likely a SBE 11 deck unit was used. more information from Sea-Bird Electronics Community Standard Description: http://vocab.nerc.ac.uk/collection/L05/current/130/
Cruise: AT18-02
AT18-02
R/V Atlantis
Community Standard Description
International Council for the Exploration of the Sea
R/V Atlantis
vessel
AT18-02
Samantha B. Joye
University of Georgia
R/V Atlantis
Community Standard Description
International Council for the Exploration of the Sea
R/V Atlantis
vessel