http://lod.bco-dmo.org/id/dataset/472814
eng; USA
utf8
dataset
Highest level of data collection, from a common set of sensors or instrumentation, usually within the same research project
Biological and Chemical Oceanography Data Management Office (BCO-DMO)
Unavailable
508-289-2009
WHOI MS#36
Woods Hole
MA
02543
USA
info@bco-dmo.org
http://www.bco-dmo.org
Monday - Friday 8:00am - 5:00pm
For questions regarding this resource, please contact BCO-DMO via the email address provided.
pointOfContact
2013-12-10
ISO 19115-2 Geographic Information - Metadata - Part 2: Extensions for Imagery and Gridded Data
ISO 19115-2:2009(E)
Depth profiles of seawater d18O and dD from R/V Knorr KN199-04 in the subtropical N. Atlantic Ocean from Oct. 2010 (U.S. GEOTRACES NAT project, GEOTRACES: Intercal Phosphate Oxygen project)
2013-12-10
publication
2013-12-10
revision
BCO-DMO Linked Data URI
2013-12-10
creation
http://lod.bco-dmo.org/id/dataset/472814
Antje H.L. Voelker
Instituto Portugues do Mar e da Atmosfera
principalInvestigator
Albert Colman
University of Chicago
principalInvestigator
Biological and Chemical Oceanography Data Management Office (BCO-DMO)
Unavailable
508-289-2009
WHOI MS#36
Woods Hole
MA
02543
USA
info@bco-dmo.org
http://www.bco-dmo.org
Monday - Friday 8:00am - 5:00pm
For questions regarding this resource, please contact BCO-DMO via the email address provided.
publisher
Cite this dataset as: Voelker, A. H., Colman, A. (2013) Depth profiles of seawater d18O and dD from R/V Knorr KN199-04 in the subtropical N. Atlantic Ocean from Oct. 2010 (U.S. GEOTRACES NAT project, GEOTRACES: Intercal Phosphate Oxygen project). Biological and Chemical Oceanography Data Management Office (BCO-DMO). (Version 2013-12-10) Version Date 2013-12-10 [if applicable, indicate subset used]. http://lod.bco-dmo.org/id/dataset/472814 [access date]
Depth profiles of seawater d18O and dD from 8 stations of the KN199-04 cruise. Dataset Description: <p>This data are published in: Voelker, A.H.L., Colman, A., Olack, G., Waniek, J.J. and Hodell, D., 2015. Oxygen and hydrogen isotope signatures of Northeast Atlantic water masses. Deep Sea Research Part II: Topical Studies in Oceanography, doi: <a href="http://dx.doi.org/10.1016/j.dsr2.2014.11.006">http://dx.doi.org/10.1016/j.dsr2.2014.11.006</a>.</p>
<p>Data for KN204-01 (GT11) not yet submitted. (9 June 2014)</p> Methods and Sampling: <p><strong>Methods for Godwin Lab/ A. Voelker data:</strong><br />
Water oxygen and hydrogen isotopes were measured simultaneously by cavity ringdown laser spectroscopy (CRDS) using a L1102-i Picarro water isotope analyzer and A0211 high-precision vaporizer. Each sample was injected nine times into the vaporizer. Memory effects from previous samples were avoided by rejecting the first three analyses. Values for the final six injections were averaged with in-run precision of less than ±0.1 for d18O and ±1 for dD (1-standard deviation). Calibration of results to V-SMOW was achieved by analyzing internal standards before and after each set of 7 or 8 samples. Internal standards were calibrated against V-SMOW, GISP, and SLAP. All results are reported in parts per thousand (o/oo) relative to V-SMOW.&nbsp;<br />
The instrument was calibrated at the start of each run using three working standards from the University of Cambridge (Delta, Botty, Spit) with known values calibrated against V-SMOW, GISP, and SLAP. An internal seawater standard (SPIT) was analysed after every three samples to correct for instrument drift.&nbsp;</p>
<p><br />
<strong>Methods for &nbsp;d18O and dD analysis at the University of Chicago</strong><br />
All seawater samples were processed on a GasBench II (Thermo, Bremen, Germany) with a CTC GC Pal (CTC analytics) and interfaced to a Delta V Plus isotope ratio mass spectrometer (Thermo). &nbsp;A hydrogen equilibration method using Pt catalyst was used for dD analysis; a classical CO2-H2O equilibration was used for d18O analysis. &nbsp;In both cases, samples were entrained in a helium carrier gas with gas sample cleanup and removal of water vapor achieved on the GasBench II peripheral prior to isotopic analysis in continuous flow mode on the mass spectrometer.</p>
<p>For D/H analyses, Pt catalyst sticks (Thermo P/N 1091831) were loaded into Exetainer tubes (Labco, 12 mL, screw cap with butyl rubber septa inserts). &nbsp;Water (samples and standards) were added to each tube using fresh 1 mL syringes (BD syringe) and needles (20 or 22 Ga, 1 or 1.5 inch lengths, BD precision Glide), with 300 µL of seawater sample used for all D/H runs. &nbsp;Standards were either primary (VSMOW2, SLAP2, and/or GISP from the IAEA) or house standards calibrated to the primary standards. &nbsp;The exetainers with Pt catalyst and water were loaded into the GasBench II heater block at 26°C in a group of 5 rows of 10 tubes. &nbsp;The CTC GC PAL sampling and flushing needles were side by side and spaced by 5 positions in the heater block. &nbsp;The first set of 5 tubes were flushed (2% H2 in He (Airgas), 20 mL/min), then following a pause, sampling of the first set of tubes was completed coincident with flushing of the adjacent set of tubes. Total incubation time of H2 gas mix with water and Pt catalyst was 68 minutes for each tube (end of flushing to start of analysis). &nbsp;The dD analysis on headspace H2 takes 15 min: 60 sec transfer time, 3 reference gas pulses (20 sec each, 30 and 80 sec spacing, last used as the reference peak) and 8 sample pulses (100 µL sampling loop, 45 sec load time at 0.5 mL/min, 35 second injection time at 1 mL/min, through PoraPlot Q GC column, 25m x 0.32mm, Varian, at 50°C). &nbsp;Typically the middle six sample peaks are used for isotopic composition determination, and linear plot of the peak’s result vs. peak number determined and the value for the first peak in the series is calculated from the slope and intercept.<br />
For d18O runs, capped Exetainer tubes were flushed with 0.3% CO2 in He (Airgas, ca. 20 mL/min) using the PAL autosampler. &nbsp; Then 200 to 300 microliters of seawater or standard was injected into the Exetainer tube as described for the D/H sample injection. &nbsp;The tubes were incubated in the Gasbench II heater block at &nbsp;26°C for 24 hrs before the analysis was initiated. &nbsp;The CTC GC PAL sampling parameters, GasBench II injection loop program and pattern of reference and sample peaks, and peak processing was similar to that described for dD measurements.</p>
<p>Raw d18O analyses are corrected for the fractionation factor between water and CO2 as a function of temperature of equilibration, mass balance between water oxygen and CO2 oxygen present in the tube, and to the isotopic reference materials using standard practices (Friedman and O’Neil). &nbsp; The D/H analyses are corrected to the standards (Nelson, 2000), and then a uniform -2.0 o/oo salt correction (Martineau et al., 2012) is applied to compensate for isotopic enrichment of the headspace H2 for the seawater samples. &nbsp;Both oxygen and hydrogen isotope compositions are reported on the VSMOW scale</p>
Funding provided by NSF Division of Ocean Sciences (NSF OCE) Award Number: OCE-0827122 Award URL: https://www.nsf.gov/awardsearch/show-award?AWD_ID=0827122
Funding provided by Centro de Investigacao Marinha e Ambiental (CIMAR) Award Number: PesT-C/MAR/LA0015/2009
onGoing
Antje H.L. Voelker
Instituto Portugues do Mar e da Atmosfera
+351-965-764-916
Laboratorio Nacional de Energia e Geologia (LNEG) Estrada da Portela, Zambujal
Amadora
2610-143
Portugal
antje.voelker@ipma.pt
pointOfContact
Albert Colman
University of Chicago
773-834-1278
Dept. Geophysical Sciences 5734 S. Ellis Ave.
Chicago
IL
60637
asc25@uchicago.edu
pointOfContact
asNeeded
Dataset Version: 2013-12-10
Unknown
cruise_id
station_GEOTRC
lat_sta
lon_sta
depth_GEOTRC_CTD
cast_GEOTRC
event_GEOTRC
date
time
bottle_GEOTRC
sample_bottle_GEOTRC
sample_GEOTRC
sample
laboratory
d18O_1
d18O_stdev_1_Chicago
d18O_QF_1
d18O_2
d18O_stdev_2_Chicago
d18O_QF_2
d18O_mean
d18O_stdev_mean
dD_1
dD_corr_Chicago
dD_stdev_Chicago
dD_QF_1
dD_2
dD_QF_2
dD_mean
dD_stdev_mean
cruise_part
Gas Chromatograph
GO-FLO
IR Mass Spec
Niskin bottle
Spectrometer
theme
None, User defined
Cruise identfier
station
latitude
longitude
depth
cast
event
date
time of day
bottle
sample identification
laboratory
oxygen 16 to oxygen 18 ratio
standard deviation
flag
No BCO-DMO term
cruise_part
featureType
BCO-DMO Standard Parameters
Gas Chromatograph
GO-FLO Bottle
Isotope-ratio Mass Spectrometer
Niskin bottle
Spectrometer
instrument
BCO-DMO Standard Instruments
KN199-04
service
Deployment Activity
Subtropical northern Atlantic Ocean
place
Locations
otherRestrictions
otherRestrictions
Access Constraints: none. Use Constraints: Please follow guidelines at: http://www.bco-dmo.org/terms-use Distribution liability: Under no circumstances shall BCO-DMO be liable for any direct, incidental, special, consequential, indirect, or punitive damages that result from the use of, or the inability to use, the materials in this data submission. If you are dissatisfied with any materials in this data submission your sole and exclusive remedy is to discontinue use.
U.S. GEOTRACES
http://www.geotraces.org/
U.S. GEOTRACES
GEOTRACES is a SCOR sponsored program; and funding for program infrastructure development is provided by the U.S. National Science Foundation.
GEOTRACES gained momentum following a special symposium, S02: Biogeochemical cycling of trace elements and isotopes in the ocean and applications to constrain contemporary marine processes (GEOSECS II), at a 2003 Goldschmidt meeting convened in Japan. The GEOSECS II acronym referred to the Geochemical Ocean Section Studies To determine full water column distributions of selected trace elements and isotopes, including their concentration, chemical speciation, and physical form, along a sufficient number of sections in each ocean basin to establish the principal relationships between these distributions and with more traditional hydrographic parameters;
* To evaluate the sources, sinks, and internal cycling of these species and thereby characterize more completely the physical, chemical and biological processes regulating their distributions, and the sensitivity of these processes to global change; and
* To understand the processes that control the concentrations of geochemical species used for proxies of the past environment, both in the water column and in the substrates that reflect the water column.
GEOTRACES will be global in scope, consisting of ocean sections complemented by regional process studies. Sections and process studies will combine fieldwork, laboratory experiments and modelling. Beyond realizing the scientific objectives identified above, a natural outcome of this work will be to build a community of marine scientists who understand the processes regulating trace element cycles sufficiently well to exploit this knowledge reliably in future interdisciplinary studies.
Expand "Projects" below for information about and data resulting from individual US GEOTRACES research projects.
U.S. GEOTRACES
largerWorkCitation
program
U.S. GEOTRACES North Atlantic Transect (GA03)
https://www.geotraces.org/
U.S. GEOTRACES North Atlantic Transect (GA03)
<p><em>Much of this text appeared in an article published in OCB News, October 2008, by the OCB Project Office.</em></p>
<p>The first U.S. GEOTRACES Atlantic Section will be specifically centered around a sampling cruise to be carried out in the North Atlantic in 2010. Ed Boyle (MIT) and Bill Jenkins (WHOI) organized a three-day planning workshop that was held September 22-24, 2008 at the Woods Hole Oceanographic Institution. The main goal of the workshop, sponsored by the National Science Foundation and the U.S. GEOTRACES Scientific Steering Committee, was to design the implementation plan for the first U.S. GEOTRACES Atlantic Section. The primary cruise design motivation was to improve knowledge of the sources, sinks and internal cycling of Trace Elements and their Isotopes (TEIs) by studying their distributions along a section in the North Atlantic (Figure 1). The North Atlantic has the full suite of processes that affect TEIs, including strong meridional advection, boundary scavenging and source effects, aeolian deposition, and the salty Mediterranean Outflow. The North Atlantic is particularly important as it lies at the "origin" of the global Meridional Overturning Circulation.</p>
<p>It is well understood that many trace metals play important roles in biogeochemical processes and the carbon cycle, yet very little is known about their large-scale distributions and the regional scale processes that affect them. Recent advances in sampling and analytical techniques, along with advances in our understanding of their roles in enzymatic and catalytic processes in the open ocean provide a natural opportunity to make substantial advances in our understanding of these important elements. Moreover, we are motivated by the prospect of global change and the need to understand the present and future workings of the ocean's biogeochemistry. The GEOTRACES strategy is to measure a broad suite of TEIs to constrain the critical biogeochemical processes that influence their distributions. In addition to these "exotic" substances, more traditional properties, including macronutrients (at micromolar and nanomolar levels), CTD, bio-optical parameters, and carbon system characteristics will be measured. The cruise starts at Line W, a repeat hydrographic section southeast of Cape Cod, extends to Bermuda and subsequently through the North Atlantic oligotrophic subtropical gyre, then transects into the African coast in the northern limb of the coastal upwelling region. From there, the cruise goes northward into the Mediterranean outflow. The station locations shown on the map are for the "fulldepth TEI" stations, and constitute approximately half of the stations to be ultimately occupied.</p>
<p><em>Figure 1. The proposed 2010 Atlantic GEOTRACES cruise track plotted on dissolved oxygen at 400 m depth. Data from the World Ocean Atlas (Levitus et al., 2005) were plotted using Ocean Data View (courtesy Reiner Schlitzer). [click on the image to view a larger version]</em><br />
<a href="http://bcodata.whoi.edu/US_GEOTRACES/AtlanticSection/GEOTRACES_Atl_stas.jpg" target="_blank"><img alt="" src="https://datadocs.bco-dmo.org/d2/US_GEOTRACES/AtlanticSection/GEOTRACES_Atl_stas.jpg" style="width:350px" /></a></p>
<p>Hydrography, CTD and nutrient measurements will be supported by the Ocean Data Facility (J. Swift) at Scripps Institution of Oceanography and funded through NSF Facilities. They will be providing an additional CTD rosette system along with nephelometer and LADCP. A trace metal clean Go-Flo Rosette and winch will be provided by the group at Old Dominion University (G. Cutter) along with a towed underway pumping system.</p>
<p>The North Atlantic Transect cruise began in 2010 with KN199 leg 4 (station sampling) and leg 5 (underway sampling only) (Figure 2).</p>
<p><a href="http://bcodata.whoi.edu//US_GEOTRACES/AtlanticSection/Cruise_Report_for_Knorr_199_Final_v3.pdf" target="_blank">KN199-04 Cruise Report (PDF)</a></p>
<p><em>Figure 2. The red line shows the cruise track for the first leg of the US Geotraces North Atlantic Transect on the R/V Knorr in October 2010. The rest of the stations (beginning with 13) will be completed in October-December 2011 on the R/V Knorr (courtesy of Bill Jenkins, Chief Scientist, GNAT first leg). [click on the image to view a larger version]</em><br />
<a href="http://bcodata.whoi.edu/US_GEOTRACES/AtlanticSection/GNAT_stationPlan.jpg" target="_blank"><img alt="Atlantic Transect Station location map" src="https://datadocs.bco-dmo.org/d2/US_GEOTRACES/AtlanticSection/GNAT_stationPlan_sm.jpg" style="width:350px" /></a></p>
<p>The section completion effort resumed again in November 2011 with KN204-01A,B (Figure 3).</p>
<p><a href="http://bcodata.whoi.edu//US_GEOTRACES/AtlanticSection/Submitted_Preliminary_Cruise_Report_for_Knorr_204-01.pdf" target="_blank">KN204-01A,B Cruise Report (PDF)</a></p>
<p><em>Figure 3. Station locations occupied on the US Geotraces North Atlantic Transect on the R/V Knorr in November 2011. [click on the image to view a larger version]</em><br />
<a href="http://bcodata.whoi.edu/US_GEOTRACES/AtlanticSection/KN204-01_Stations.png" target="_blank"><img alt="Atlantic Transect/Part 2 Station location map" src="https://datadocs.bco-dmo.org/d2/US_GEOTRACES/AtlanticSection/KN204-01_Stations.png" style="width:350px" /></a></p>
<p>Data from the North Atlantic Transect cruises are available under the Datasets heading below, and consensus values for the SAFe and North Atlantic GEOTRACES Reference Seawater Samples are available from the GEOTRACES Program Office: <a href="http://www.geotraces.org/science/intercalibration/322-standards-and-reference-materials?acm=455_215" target="_blank">Standards and Reference Materials</a></p>
<p><strong>ADCP data</strong> are available from the Currents ADCP group at the University of Hawaii at the links below:<br />
<a href="http://currents.soest.hawaii.edu/uhdas_adcp/year2010.html#kn199_4" target="_blank">KN199-04</a> (leg 1 of 2010 cruise; Lisbon to Cape Verde)<br />
<a href="http://currents.soest.hawaii.edu/uhdas_adcp/year2010.html#kn199_5" target="_blank">KN199-05</a> (leg 2 of 2010 cruise; Cape Verde to Charleston, NC)<br />
<a href="http://currents.soest.hawaii.edu/uhdas_adcp/year2011.html#kn204_01" target="_blank">KN204-01A</a> (part 1 of 2011 cruise; Woods Hole, MA to Bermuda)<br />
<a href="http://currents.soest.hawaii.edu/uhdas_adcp/year2011.html#kn204_02" target="_blank">KN204-01B</a> (part 2 of 2011 cruise; Bermuda to Cape Verde)</p>
U.S. GEOTRACES NAT
largerWorkCitation
project
GEOTRACES: Intercalibration of Phosphate Oxygen Isotope Analyses and Sample Processing Techniques
https://osprey.bco-dmo.org/project/472817
GEOTRACES: Intercalibration of Phosphate Oxygen Isotope Analyses and Sample Processing Techniques
<p>Abstract:</p>
<p>The oxygen isotope composition of dissolved phosphate has the utility of tracing sources of this nutrient in continental shelf and upper slope environments, yield insights into remineralization mechanisms in the open ocean, and reveal biological turnover rates of phosphate. However, currently only a few published measurements are available. Inclusion of this parameter into the GEOTRACES Program would significantly enhance the data set but requires that his component be intercalibrated. For this reason, a scientist from the University of Chicago plans to collect and analyze water samples for the oxygen isotope composition of dissolved phosphate during the GEOTRACES intercalibration cruises to the Atlantic and Pacific Ocean. Once the analyses are completed, a set of recommendations on the best practices to obtain reliable measurements would be made accessible to the ocean sciences community. In addition, the researcher proposes to distribute samples and standards for the analysis of oxygen isotope composition of dissolved phosphate.</p>
<p>As regards broader impacts, this intercalibration effort could represent a first step towards the development of a new tracer for the ocean sciences community aimed at furthering our understanding of the phosphorus cycle. </p>
GEOTRACES: Intercal Phosphate Oxygen
largerWorkCitation
project
eng; USA
oceans
Subtropical northern Atlantic Ocean
2013-12-10
Subtropical western and eastern North Atlantic Ocean (GA03)
0
BCO-DMO catalogue of parameters from Depth profiles of seawater d18O and dD from R/V Knorr KN199-04 in the subtropical N. Atlantic Ocean from Oct. 2010 (U.S. GEOTRACES NAT project, GEOTRACES: Intercal Phosphate Oxygen project)
Biological and Chemical Oceanography Data Management Office (BCO-DMO)
Unavailable
508-289-2009
WHOI MS#36
Woods Hole
MA
02543
USA
info@bco-dmo.org
http://www.bco-dmo.org
Monday - Friday 8:00am - 5:00pm
For questions regarding this resource, please contact BCO-DMO via the email address provided.
pointOfContact
http://lod.bco-dmo.org/id/dataset-parameter/472854.rdf
Name: cruise_id
Units: dimensionless
Description: <p>Cruise ID number</p>
http://lod.bco-dmo.org/id/dataset-parameter/472855.rdf
Name: station_GEOTRC
Units: dimensionless
Description: <p>Station number within cruise</p>
http://lod.bco-dmo.org/id/dataset-parameter/472856.rdf
Name: lat_sta
Units: degrees North
Description: <p>Nominal latitude of station. Obtained from KN199-04 station waypoints provided by Chief Sci.</p>
http://lod.bco-dmo.org/id/dataset-parameter/472857.rdf
Name: lon_sta
Units: degrees East
Description: <p>Nominal longitude of station. Obtained from KN199-04 station waypoints provided by Chief Sci.</p>
http://lod.bco-dmo.org/id/dataset-parameter/472858.rdf
Name: depth_GEOTRC_CTD
Units: meters
Description: <p>Observation/sample depth in meters. Calculated from CTD pressure.</p>
http://lod.bco-dmo.org/id/dataset-parameter/472859.rdf
Name: cast_GEOTRC
Units: dimensionless
Description: <p>Cast identifier; numbered consecutively within a station.</p>
http://lod.bco-dmo.org/id/dataset-parameter/472860.rdf
Name: event_GEOTRC
Units: dimensionless
Description: <p>Unique identifying number for US GEOTRACES sampling events; ranges from 2001 to 2225 for KN199-04 events and from 3001 to 3282 for KN204-01 events.</p>
http://lod.bco-dmo.org/id/dataset-parameter/472861.rdf
Name: date
Units: YYYYMMDD
Description: <p>Date sample collected; UTC</p>
http://lod.bco-dmo.org/id/dataset-parameter/472862.rdf
Name: time
Units: hhmm (h = hour; m = minute)
Description: <p>Time sample collected; UTC</p>
http://lod.bco-dmo.org/id/dataset-parameter/472863.rdf
Name: bottle_GEOTRC
Units: dimensionless
Description: <p>Alphanumeric characters identifying bottle type (e.g. NIS representing Niskin and GF representing GOFLO) and position on a CTD rosette.</p>
http://lod.bco-dmo.org/id/dataset-parameter/472864.rdf
Name: sample_bottle_GEOTRC
Units: dimensionless
Description: <p>Unique identification numbers given to samples taken from bottles; rangies from 1 to 24; often used synonymously with bottle number.</p>
http://lod.bco-dmo.org/id/dataset-parameter/472865.rdf
Name: sample_GEOTRC
Units: dimensionless
Description: <p>Unique identifying number for US GEOTRACES samples; ranges from 5033 to 6078 for KN199-04 and from 6112 to 8148 for KN204-01.</p>
http://lod.bco-dmo.org/id/dataset-parameter/472866.rdf
Name: sample
Units: dimensionless
Description: <p>Internal Lab sample ID given by A. Colman</p>
http://lod.bco-dmo.org/id/dataset-parameter/472867.rdf
Name: laboratory
Units: dimensionless
Description: <p>Laboratory responsible for analysis: 1 = Godwin; 2 = Chicago</p>
http://lod.bco-dmo.org/id/dataset-parameter/472868.rdf
Name: d18O_1
Units: permil V-SMOW
Description: <p>Isotope ratio 18O/16O; 1st analysis</p>
http://lod.bco-dmo.org/id/dataset-parameter/472869.rdf
Name: d18O_stdev_1_Chicago
Units: permil V-SMOW
Description: <p>1 sigma standard deviation for the samples analysed by the Chicago lab (Colman): 1st analysis.</p>
http://lod.bco-dmo.org/id/dataset-parameter/472870.rdf
Name: d18O_QF_1
Units: dimensionless
Description: <p>Quality flag of results from 1st analysis: 1= ok; 2 = unusual but accepted; 9 = rejected</p>
http://lod.bco-dmo.org/id/dataset-parameter/472871.rdf
Name: d18O_2
Units: permil V-SMOW
Description: <p>Isotope ratio 18O/16O; 2nd analysis</p>
http://lod.bco-dmo.org/id/dataset-parameter/472872.rdf
Name: d18O_stdev_2_Chicago
Units: permil V-SMOW
Description: <p>1 sigma standard deviation for the samples analysed by the Chicago lab (Colman): 2nd analysis.</p>
http://lod.bco-dmo.org/id/dataset-parameter/472873.rdf
Name: d18O_QF_2
Units: dimensionless
Description: <p>Quality flag of results from 2nd analysis: 1= ok; 2 = unusual but accepted; 9 = rejected</p>
http://lod.bco-dmo.org/id/dataset-parameter/472874.rdf
Name: d18O_mean
Units: permil V-SMOW
Description: <p>Average of d18O analyses</p>
http://lod.bco-dmo.org/id/dataset-parameter/472875.rdf
Name: d18O_stdev_mean
Units: permil V-SMOW
Description: <p>1 sigma standard deviation</p>
http://lod.bco-dmo.org/id/dataset-parameter/472876.rdf
Name: dD_1
Units: permil V-SMOW
Description: <p>Isotope ratio of 2H:1H; 1st analysis</p>
http://lod.bco-dmo.org/id/dataset-parameter/472877.rdf
Name: dD_corr_Chicago
Units: permil V-SMOW
Description: <p>Chicago value corrected by -2 o/oo</p>
http://lod.bco-dmo.org/id/dataset-parameter/472878.rdf
Name: dD_stdev_Chicago
Units: permil V-SMOW
Description: <p>1 sigma standard deviation Chicago</p>
http://lod.bco-dmo.org/id/dataset-parameter/472879.rdf
Name: dD_QF_1
Units: dimensionless
Description: <p>Quality flag of results from 1st analysis: 1= ok; 2 = unusual but accepted; 9 = rejected</p>
http://lod.bco-dmo.org/id/dataset-parameter/472880.rdf
Name: dD_2
Units: permil V-SMOW
Description: <p>Isotope ratio of 2H:1H; 2nd analysis</p>
http://lod.bco-dmo.org/id/dataset-parameter/472881.rdf
Name: dD_QF_2
Units: dimensionless
Description: <p>Quality flag of results from 2nd analysis: 1= ok; 2 = unusual but accepted; 9 = rejected</p>
http://lod.bco-dmo.org/id/dataset-parameter/472882.rdf
Name: dD_mean
Units: permil V-SMOW
Description: <p>Average of dD analyses</p>
http://lod.bco-dmo.org/id/dataset-parameter/472883.rdf
Name: dD_stdev_mean
Units: permil V-SMOW
Description: <p>dD; 1 sigma standard deviation</p>
http://lod.bco-dmo.org/id/dataset-parameter/516464.rdf
Name: cruise_part
Units: unitless
Description: <p>name given to a leg of the cruise</p>
GB/NERC/BODC > British Oceanographic Data Centre, Natural Environment Research Council, United Kingdom
Biological and Chemical Oceanography Data Management Office (BCO-DMO)
Unavailable
508-289-2009
WHOI MS#36
Woods Hole
MA
02543
USA
info@bco-dmo.org
http://www.bco-dmo.org
Monday - Friday 8:00am - 5:00pm
For questions regarding this resource, please contact BCO-DMO via the email address provided.
pointOfContact
30565
https://datadocs.bco-dmo.org/file/6YYMwPOtPV09ZZ/isotopes_OH.csv
isotopes_OH.csv
Primary data file for dataset ID 472814
download
https://osprey.bco-dmo.org/dataset/472814/data/download
download
onLine
dataset
<p><strong>Methods for Godwin Lab/ A. Voelker data:</strong><br />
Water oxygen and hydrogen isotopes were measured simultaneously by cavity ringdown laser spectroscopy (CRDS) using a L1102-i Picarro water isotope analyzer and A0211 high-precision vaporizer. Each sample was injected nine times into the vaporizer. Memory effects from previous samples were avoided by rejecting the first three analyses. Values for the final six injections were averaged with in-run precision of less than ±0.1 for d18O and ±1 for dD (1-standard deviation). Calibration of results to V-SMOW was achieved by analyzing internal standards before and after each set of 7 or 8 samples. Internal standards were calibrated against V-SMOW, GISP, and SLAP. All results are reported in parts per thousand (o/oo) relative to V-SMOW.&nbsp;<br />
The instrument was calibrated at the start of each run using three working standards from the University of Cambridge (Delta, Botty, Spit) with known values calibrated against V-SMOW, GISP, and SLAP. An internal seawater standard (SPIT) was analysed after every three samples to correct for instrument drift.&nbsp;</p>
<p><br />
<strong>Methods for &nbsp;d18O and dD analysis at the University of Chicago</strong><br />
All seawater samples were processed on a GasBench II (Thermo, Bremen, Germany) with a CTC GC Pal (CTC analytics) and interfaced to a Delta V Plus isotope ratio mass spectrometer (Thermo). &nbsp;A hydrogen equilibration method using Pt catalyst was used for dD analysis; a classical CO2-H2O equilibration was used for d18O analysis. &nbsp;In both cases, samples were entrained in a helium carrier gas with gas sample cleanup and removal of water vapor achieved on the GasBench II peripheral prior to isotopic analysis in continuous flow mode on the mass spectrometer.</p>
<p>For D/H analyses, Pt catalyst sticks (Thermo P/N 1091831) were loaded into Exetainer tubes (Labco, 12 mL, screw cap with butyl rubber septa inserts). &nbsp;Water (samples and standards) were added to each tube using fresh 1 mL syringes (BD syringe) and needles (20 or 22 Ga, 1 or 1.5 inch lengths, BD precision Glide), with 300 µL of seawater sample used for all D/H runs. &nbsp;Standards were either primary (VSMOW2, SLAP2, and/or GISP from the IAEA) or house standards calibrated to the primary standards. &nbsp;The exetainers with Pt catalyst and water were loaded into the GasBench II heater block at 26°C in a group of 5 rows of 10 tubes. &nbsp;The CTC GC PAL sampling and flushing needles were side by side and spaced by 5 positions in the heater block. &nbsp;The first set of 5 tubes were flushed (2% H2 in He (Airgas), 20 mL/min), then following a pause, sampling of the first set of tubes was completed coincident with flushing of the adjacent set of tubes. Total incubation time of H2 gas mix with water and Pt catalyst was 68 minutes for each tube (end of flushing to start of analysis). &nbsp;The dD analysis on headspace H2 takes 15 min: 60 sec transfer time, 3 reference gas pulses (20 sec each, 30 and 80 sec spacing, last used as the reference peak) and 8 sample pulses (100 µL sampling loop, 45 sec load time at 0.5 mL/min, 35 second injection time at 1 mL/min, through PoraPlot Q GC column, 25m x 0.32mm, Varian, at 50°C). &nbsp;Typically the middle six sample peaks are used for isotopic composition determination, and linear plot of the peak’s result vs. peak number determined and the value for the first peak in the series is calculated from the slope and intercept.<br />
For d18O runs, capped Exetainer tubes were flushed with 0.3% CO2 in He (Airgas, ca. 20 mL/min) using the PAL autosampler. &nbsp; Then 200 to 300 microliters of seawater or standard was injected into the Exetainer tube as described for the D/H sample injection. &nbsp;The tubes were incubated in the Gasbench II heater block at &nbsp;26°C for 24 hrs before the analysis was initiated. &nbsp;The CTC GC PAL sampling parameters, GasBench II injection loop program and pattern of reference and sample peaks, and peak processing was similar to that described for dD measurements.</p>
<p>Raw d18O analyses are corrected for the fractionation factor between water and CO2 as a function of temperature of equilibration, mass balance between water oxygen and CO2 oxygen present in the tube, and to the isotopic reference materials using standard practices (Friedman and O’Neil). &nbsp; The D/H analyses are corrected to the standards (Nelson, 2000), and then a uniform -2.0 o/oo salt correction (Martineau et al., 2012) is applied to compensate for isotopic enrichment of the headspace H2 for the seawater samples. &nbsp;Both oxygen and hydrogen isotope compositions are reported on the VSMOW scale</p>
Specified by the Principal Investigator(s)
<p>Averages were calculated for duplicate measurements.</p>
Specified by the Principal Investigator(s)
asNeeded
7.x-1.1
Biological and Chemical Oceanography Data Management Office (BCO-DMO)
Unavailable
508-289-2009
WHOI MS#36
Woods Hole
MA
02543
USA
info@bco-dmo.org
http://www.bco-dmo.org
Monday - Friday 8:00am - 5:00pm
For questions regarding this resource, please contact BCO-DMO via the email address provided.
pointOfContact
Gas Chromatograph
Gas Chromatograph
PI Supplied Instrument Name: Gas Chromatograph PI Supplied Instrument Description:PoraPlot Q GC column, 25m x 0.32mm, Varian, at 50C). Instrument Name: Gas Chromatograph Instrument Short Name:Gas Chromatograph Instrument Description: Instrument separating gases, volatile substances, or substances dissolved in a volatile solvent by transporting an inert gas through a column packed with a sorbent to a detector for assay. (from SeaDataNet, BODC) Community Standard Description: http://vocab.nerc.ac.uk/collection/L05/current/LAB02/
GO-FLO
GO-FLO
PI Supplied Instrument Name: GO-FLO PI Supplied Instrument Description:Demi station samples were collected from the GEOTRACES GO-FLO rosette. The U.S. GEOTRACES sampling system consisted of 24 Teflon-coated GO-FLO bottles. Instrument Name: GO-FLO Bottle Instrument Short Name:GO-FLO Instrument Description: GO-FLO bottle cast used to collect water samples for pigment, nutrient, plankton, etc. The GO-FLO sampling bottle is specially designed to avoid sample contamination at the surface, internal spring contamination, loss of sample on deck (internal seals), and exchange of water from different depths. Community Standard Description: http://vocab.nerc.ac.uk/collection/L05/current/30/
IR Mass Spec
IR Mass Spec
PI Supplied Instrument Name: IR Mass Spec PI Supplied Instrument Description:Colman Lab: All seawater samples were processed on a GasBench II (Thermo, Bremen, Germany) with a CTC GC Pal (CTC analytics) and interfaced to a Delta V Plus isotope ratio mass spectrometer (Thermo) Instrument Name: Isotope-ratio Mass Spectrometer Instrument Short Name:IR Mass Spec; IRMS Instrument Description: The Isotope-ratio Mass Spectrometer is a particular type of mass spectrometer used to measure the relative abundance of isotopes in a given sample (e.g. VG Prism II Isotope Ratio Mass-Spectrometer). Community Standard Description: http://vocab.nerc.ac.uk/collection/L05/current/LAB16/
Niskin bottle
Niskin bottle
PI Supplied Instrument Name: Niskin bottle Instrument Name: Niskin bottle Instrument Short Name:Niskin bottle Instrument Description: A Niskin bottle (a next generation water sampler based on the Nansen bottle) is a cylindrical, non-metallic water collection device with stoppers at both ends. The bottles can be attached individually on a hydrowire or deployed in 12, 24, or 36 bottle Rosette systems mounted on a frame and combined with a CTD. Niskin bottles are used to collect discrete water samples for a range of measurements including pigments, nutrients, plankton, etc. Community Standard Description: http://vocab.nerc.ac.uk/collection/L22/current/TOOL0412/
Spectrometer
Spectrometer
PI Supplied Instrument Name: Spectrometer PI Supplied Instrument Description:Godwin/Voelker Lab: Water oxygen and hydrogen isotopes were measured simultaneously by cavity ringdown laser spectroscopy (CRDS) using a L1102-i Picarro water isotope analyzer and A0211 high-precision vaporizer. Instrument Name: Spectrometer Instrument Short Name:Spectrometer Instrument Description: A spectrometer is an optical instrument used to measure properties of light over a specific portion of the electromagnetic spectrum. Community Standard Description: http://vocab.nerc.ac.uk/collection/L22/current/TOOL0460/
Cruise: KN199-04
KN199-04
R/V Knorr
Community Standard Description
International Council for the Exploration of the Sea
R/V Knorr
vessel
KN199-04
William J. Jenkins
Woods Hole Oceanographic Institution
http://bcodata.whoi.edu/US_GEOTRACES/AtlanticSection/Cruise_Report_for_Knorr_199_Final_v3.pdf
Report describing KN199-04
R/V Knorr
Community Standard Description
International Council for the Exploration of the Sea
R/V Knorr
vessel