http://lod.bco-dmo.org/id/dataset/676231
eng; USA
utf8
dataset
Highest level of data collection, from a common set of sensors or instrumentation, usually within the same research project
Biological and Chemical Oceanography Data Management Office (BCO-DMO)
Unavailable
508-289-2009
WHOI MS#36
Woods Hole
MA
02543
USA
info@bco-dmo.org
http://www.bco-dmo.org
Monday - Friday 8:00am - 5:00pm
For questions regarding this resource, please contact BCO-DMO via the email address provided.
pointOfContact
2017-01-26
ISO 19115-2 Geographic Information - Metadata - Part 2: Extensions for Imagery and Gridded Data
ISO 19115-2:2009(E)
Small and large particulate Th and Pa samples from different depth profiles collected on R/V Thomas G. Thompson in the Eastern Tropical Pacific during 2013 (EPZT Th Pa project)
2017-01-24
publication
2017-01-24
revision
BCO-DMO Linked Data URI
2017-01-24
creation
http://lod.bco-dmo.org/id/dataset/676231
Robert F. Anderson
Lamont-Doherty Earth Observatory
principalInvestigator
Hai Cheng
University of Minnesota Twin Cities
principalInvestigator
R. Lawrence Edwards
University of Minnesota Twin Cities
principalInvestigator
Martin Q. Fleisher
Lamont-Doherty Earth Observatory
principalInvestigator
Biological and Chemical Oceanography Data Management Office (BCO-DMO)
Unavailable
508-289-2009
WHOI MS#36
Woods Hole
MA
02543
USA
info@bco-dmo.org
http://www.bco-dmo.org
Monday - Friday 8:00am - 5:00pm
For questions regarding this resource, please contact BCO-DMO via the email address provided.
publisher
Cite this dataset as: Anderson, R. F., Edwards, R. L., Fleisher, M. Q., Cheng, H. (2017) Small and large particulate Th and Pa samples from different depth profiles collected on R/V Thomas G. Thompson in the Eastern Tropical Pacific during 2013 (EPZT Th Pa project). Biological and Chemical Oceanography Data Management Office (BCO-DMO). (Version 1) Version Date 2017-01-24 [if applicable, indicate subset used]. http://lod.bco-dmo.org/id/dataset/676231 [access date]
Depth profiles of seawater small and large particulate Th and Pa (RESTRICTED) Dataset Description: <p>Depth profiles of seawater small and large particulate 232Th, 230Th, and 231Pa.</p> Methods and Sampling: <p>Size-fractionated particles were collected using McLane Research in-situ pumps (WTS-LV) that had been modified to accommodate two flowpaths (Lam and Morris Patent pending).&nbsp;&nbsp; The wire-out was used to target depths during deployment, and a self-recording Seabird 19plus CTD deployed at the end of the line and RBR data loggers attached to three of the eight pumps were used to correct for actual depths during pumping.</p>
<p>Filter holders used were 142 mm-diameter “mini-MULVFS” style filter holders with two stages for two size fractions and multiple baffle systems designed to ensure even particle distribution and prevent particle loss (Bishop et al. 2012).&nbsp; One of two filter holder/flowpaths was loaded with a 51um Sefar polyester mesh prefilter followed by paired 0.8 um Pall Supor800 polyethersulfone filters.&nbsp; Each cast also had “dipped blank” filters deployed.&nbsp; These were the full filters sets (prefilter followed by paired Supor filters) sandwiched within a 1 um polyester mesh filter, loaded into perforated polypropylene containers, attached with plastic cable ties to a pump frame, and deployed.&nbsp; Dipped blank filters were exposed to seawater for the length of the deployment and processed and analyzed as regular samples, and thus functioned as full seawater process blanks.&nbsp; We analyzed either quarter (LDEO) or eighth (Minnesota) portions of the top and bottom filters from the “dipped” blank from 1 or more depths for all stations.</p>
<p>All filters and filter holders were acid leached prior to use according to methods recommended in the GEOTRACES sample and sample-handing Protocols (Geotraces 2010).</p>
<p><strong>Analytical methods for particulate radionuclides:</strong></p>
<p><strong>LDEO:</strong></p>
<p>Filters were folded into 60 mL Teflon jars and weighed aliquots of artificial isotope yield monitors&nbsp;229Th (1 pg) and&nbsp;233Pa (0.3-0.4 pg) and 7-8 mg dissolved Fe were added to each sample, which then sat overnight in 5 mL 16M HNO3&nbsp;&nbsp;[All acids and bases used were Fisher Chemical OPTIMA grade or equivalent from Trace Metal grade acids re-distilled in a Savillex™ DST-1000 sub-boiling still]. The next day, the filters were heated for ~1 hour at 180 deg C, at which point 4-5 ml HClO4&nbsp;was added and the hot plate temperature was increased to 220 deg C. Samples were heated until dense white fumes appeared. After 10-20 minutes, the samples were covered with a Teflon watch cover. After 30-60 minutes, rapid oxidation of the Supor material would occur, at which point the Supor material was almost completely broken down. The watch glasses were removed and beaker walls were rinsed down with 3 ml 8N HNO3.&nbsp;Ten drops of HF were added, and the samples were heated at 220 deg C until the HClO4&nbsp;dried down to a viscous residue.</p>
<p>The sample residue was taken up in dilute HCl, and transferred to 50 mL centrifuge tubes with Milli-Q water rinses. Fifteen to 25 drops of NH4OH were added to raise pH to 8-8.5 when iron (oxy)hydroxide precipitated. This precipitate was then centrifuged, supernatant was decanted, and the precipitate was washed with Milli-Q H2O. These step were repeated. The precipitate was then dissolved in 12 M HCl, ready for a series of anion-exchange chromatography steps to purify Th and Pa, as outlined in Anderson et. al., 2012. The purified Th and Pa solutions were dried down at 180-220 deg C in the presence of 2 drops of HClO4&nbsp;and taken up in 0.5 mL of 0.16 M HNO3/0.026 M HF for mass spectrometric analysis.</p>
<p>Concentrations of&nbsp;232Th,&nbsp;230Th and&nbsp;231Pa were calculated by isotope dilution, relative to the calibrated tracers&nbsp;229Th and&nbsp;233Pa added at the beginning of sample processing. Analyses were carried out on a Thermo-Finnegan ELEMENT XR Single Collector Magnetic Sector ICP-MS, equipped with a high-performance Interface pump (Jet Pump), and specially-designed sample (X) and skimmer (Jet) cones to ensure the highest possible sensitivity. All measurements were made in low-resolution mode (∆m/M≈300), peak jumping in Escan mode across the central 5% of the flat-topped peaks. Measurements were made on a MasCom^TM SEM;&nbsp;229Th,&nbsp;230Th, 231Pa and&nbsp;233Pa were measured in Counting mode, while the&nbsp;232Th signals were large enough that they were measured in Analog mode. Two solutions of SRM129, a natural U standard, were run multiple times throughout each run. One solution was in a concentration range where&nbsp;238U and&nbsp;235U were both measured in counting mode, allowing us to determine the mass bias/amu (typical values varied from -0.01/amu to 0.03/amu). In the other, more concentrated solution,&nbsp;238U was measured in Analog mode and&nbsp;235U was measured in Counting mode, yielding a measurement of the Analog/Counting Correction Factor.&nbsp; These corrections assume that the mass bias and Analog Correction Factor measured on U isotopes can be applied to Th and Pa isotope measurements. Each sample measurement was bracketed by measurement of an aliquot of the run solution, used to correct for the instrumental background count rates. To correct for tailing of&nbsp;232Th into the minor Th and Pa isotopes, a series of&nbsp;232Th standards were run at concentrations bracketing the expected&nbsp;232Th concentrations in the samples. The analysis routine for these standards was identical to the analysis routine for samples, so we could see the changing beam intensities at the minor masses as we increased the concentration of the&nbsp;232Th standards. The&nbsp;232Th count rates in our Pa fractions are quite small, reflecting mainly reagent blanks, compared to the&nbsp;232Th signal intensity in the Th fraction. The regressions of&nbsp;230Th,&nbsp;231Pa, and&nbsp;233Pa signals as a function of the&nbsp;232Th signal in the standards was used to correct for tailing of&nbsp;232Th in samples.</p>
<p>In addition to laboratory procedural blanks (reagents/labware blanks) and periodic measurements of an intercalibrated working standard solution of&nbsp;232Th,&nbsp;230Th and&nbsp;231Pa, SW STD 2010-1, referred to by Anderson et al. (2012), the participating labs also analyzed “dipped blank” filters, mentioned above, to determine the total blank, associated with the sample collection and handling in addition to the laboratory procedure. LDEO measured top and bottom dipped blanks separately, while UMN measured top and bottom dipped blanks together.</p>
<p>We pooled all procedural blank-corrected “dipped” blanks separately by institution to determine filter blank corrections. That is, the LDEO data were corrected by the LDEO average dipped blank values (both top and bottom included), while the UMN data were corrected by the UMN average dipped blank values. Averages for “Dipped” small particle filter blanks for a 1/4 filter fraction&nbsp;232Th,&nbsp;230Th, and&nbsp;231Pa at LDEO were 21.52 +/- 19.32 pg, 1.17 +/- 0.9 fg, and 0.07 +/- 0.07 fg, respectively.</p>
<p>Further details on analysis of seawater particulate radionuclides are given by Anderson et al. (2012).</p>
<p><strong>UMN:</strong></p>
<p>Filters were folded into 30 mL Teflon beaker and weighed aliquots of the artificial isotope yield monitors&nbsp;229Th and&nbsp;233Pa. Filters were first completely submerged in 7N HNO3&nbsp;acid combined with 10 drops HF, tightly covered with a Teflon threaded cap and heated for 10 hours at 200 deg F so that the particulate sample was dissolved/leached under pressure. The leach solution was then transferred to a second acid-cleaned Teflon beaker separate from the residual filter. Five drops of HClO4&nbsp;were then added to the leach solution in the second beaker.&nbsp; The original beaker walls and caps were washed with small amounts of weak HNO3&nbsp;and the resulting solution added to the second beaker. The solution was then dried down and was taken up in 2N HCl, and transferred to 15ml centrifuge tubes along with a 2N HCl rinse. One drop of dissolved Fe and six to nine drops of NH4OH were added to raise pH to 8-8.5 at which time iron (oxy)hydroxide precipitated.&nbsp; This precipitate was then centrifuged, decanted, washed with deionized H2O (&gt;18 MΩ), centrifuged, and dissolved in 14M HNO3&nbsp;and transferred to a Teflon beaker. It was then dried down and taken up in 7N HNO3&nbsp;for anion-exchange chromatography using AG1-X8, 100-200 mesh resin and a polyethylene frit. Initial separation was done on Teflon columns (internal diameter ~ 0.35cm) with a ~0.55 ml column volume (CV).&nbsp; The sample was loaded in one CV of 7N HNO3, followed by 1.5 CV of 7N HNO3, 3 CV of 8N HCl (collect Th fraction), and 3 CV of 8N HCl combined with 0.015N HF (collect Pa fraction).&nbsp; The Pa and Th fractions were then dried down in the presence of 2 drops of HClO4&nbsp;and taken up in 7N HNO3.&nbsp; They were each passed through second and third columns (each with ~0.55 ml column volumes) using similar elution schemes.&nbsp; The final Pa and Th fractions were then dried down in the presence of 2 drops of HClO4&nbsp;and dissolved in weak nitric acid for analysis on the mass spectrometer.</p>
<p>Concentrations of&nbsp;232Th,&nbsp;230Th and&nbsp;231Pa were calculated by isotope dilution using nuclide ratios determined on a Thermo-Finnigan Neptune mass spectrometer. All measurements were done using a peak jumping routine in ion counting mode on the discreet dynode multiplier behind the retarding potential quadrupole.&nbsp; A solution of&nbsp;233U-236U tracer was run to determine the mass bias correction (assuming that the mass fractionation for Th and Pa are the same as for U). Each sample measurement was bracketed by measurement of an aliquot of a wash solution, used to correct for the instrument background count rates on the masses measured.</p>
<p>Particulate samples were analyzed in batches of 37 to 39.&nbsp; An aliquot of an intercalibrated working standard solution of&nbsp;232Th,&nbsp;230Th and&nbsp;231Pa, SW STD 2010-1, was added to a separate acid-cleaned Teflon beaker along with weighed aliquots of&nbsp;229Th spike and&nbsp;233Pa spike. Spike and Standard were equilibrated for 3 days. The solution was then dried down and taken up in 7N HNO3&nbsp;for anion-exchange chromatography using AG1-X8, 100-200 mesh resin and a polyethylene frit, and processed like a sample. In addition to laboratory procedural blanks (reagents/labware blanks), a number of “dipped blank” filters were also processed like samples, to determine the total blank, associated with the sample collection and handling, in addition to the laboratory procedure.</p>
<p>At UMN, averages for “Dipped” small particle filter blanks for a 1/8 filter fraction were 13.06 +/- 15.43 pg&nbsp;232Th, 0.61 +/- 0.55 fg&nbsp;230Th, and 0.05 +/- 0.05 fg&nbsp;231Pa respectively. For large particles, the blanks for a 1/8 filter fraction were 11.89 +/- 9.90 pg&nbsp;232Th, 0.57 +/- 0.60 fg&nbsp;230Th, and 0.03 +/-&nbsp;0.02 fg&nbsp;231Pa.</p>
<p>Further details on Pa and Th analysis at the U. Minnesota laboratory are given in Shen et al. (2002, 2003, 2012), and Cheng et al. (2000, 2013).&nbsp;</p>
Funding provided by NSF Division of Ocean Sciences (NSF OCE) Award Number: OCE-1233688 Award URL: https://www.nsf.gov/awardsearch/show-award?AWD_ID=1233688
Funding provided by NSF Division of Ocean Sciences (NSF OCE) Award Number: OCE-1233903 Award URL: https://www.nsf.gov/awardsearch/show-award?AWD_ID=1233903
completed
Robert F. Anderson
Lamont-Doherty Earth Observatory
845-365-8508
61 U.S. Route 9W, P.O. Box 1000 231 Comer Building
Palisades
NY
10964-8000
USA
boba@ldeo.columbia.edu
pointOfContact
Hai Cheng
University of Minnesota Twin Cities
612-624-9598
100 Union Street SE Shep Lab, Room 475
Minneapolis
MN
55455
USA
cheng021@umn.edu
pointOfContact
R. Lawrence Edwards
University of Minnesota Twin Cities
612-626-0207
116 Church Street SE Tate Hall, Room 471
Minneapolis
MN
55455
USA
edwar001@umn.edu
pointOfContact
Martin Q. Fleisher
Lamont-Doherty Earth Observatory
845-365-8632
233 Comer Bldg. 61 Route 9W
Palisades
NY
10964
USA
martyq@ldeo.columbia.edu
pointOfContact
asNeeded
Dataset Version: 1
Unknown
cruise_id
cruise_part
STNNBR
EVENT_LAT
EVENT_LON
DEPTH_MAX
CASTNO
GEOTRC_EVENTNO
DATE_START_EVENT
TIME_START_EVENT
BTLNBR
GEOTRC_SAMPNO
lab
Th_232_SP_CONC_PUMP
Th_232_SP_CONC_PUMP_ERR
Th_232_SP_CONC_PUMP_FLAG
Th_230_SP_CONC_PUMP
Th_230_SP_CONC_PUMP_ERR
Th_230_SP_CONC_PUMP_FLAG
Pa_231_SP_CONC_PUMP
Pa_231_SP_CONC_PUMP_ERR
Pa_231_SP_CONC_PUMP_FLAG
Th_232_LP_CONC_PUMP
Th_232_LP_CONC_PUMP_ERR
Th_232_LP_CONC_PUMP_FLAG
Th_230_LP_CONC_PUMP
Th_230_LP_CONC_PUMP_ERR
Th_230_LP_CONC_PUMP_FLAG
Pa_231_LP_CONC_PUMP
Pa_231_LP_CONC_PUMP_ERR
Pa_231_LP_CONC_PUMP_FLAG
Th_230_SP_ADS_CONC_PUMP
Th_230_SP_ADS_CONC_PUMP_ERR
Th_230_SP_XS_CONC_PUMP
Th_230_SP_XS_CONC_PUMP_ERR
Pa_231_SP_ADS_CONC_PUMP
Pa_231_SP_ADS_CONC_PUMP_ERR
Pa_231_SP_XS_CONC_PUMP
Pa_231_SP_XS_CONC_PUMP_ERR
Th_230_LP_ADS_CONC_PUMP
Th_230_LP_ADS_CONC_PUMP_ERR
Th_230_LP_XS_CONC_PUMP
Th_230_LP_XS_CONC_PUMP_ERR
Pa_231_LP_ADS_CONC_PUMP
Pa_231_LP_ADS_CONC_PUMP_ERR
Pa_231_LP_XS_CONC_PUMP
Pa_231_LP_XS_CONC_PUMP_ERR
SeaBird 19Plus
Niskin bottle
in situ pumps
theme
None, User defined
Cruise identfier
cruise_part
station
latitude
longitude
depth_max
cast
event
date
time of day
bottle number
sample identification
laboratory
trace element concentration
flag
featureType
BCO-DMO Standard Parameters
CTD Sea-Bird
Niskin bottle
Pump
instrument
BCO-DMO Standard Instruments
TN303
service
Deployment Activity
Eastern Tropical Pacific - Transect from Peru to Tahiti
place
Locations
otherRestrictions
otherRestrictions
Access Constraints: none. Use Constraints: Please follow guidelines at: http://www.bco-dmo.org/terms-use Distribution liability: Under no circumstances shall BCO-DMO be liable for any direct, incidental, special, consequential, indirect, or punitive damages that result from the use of, or the inability to use, the materials in this data submission. If you are dissatisfied with any materials in this data submission your sole and exclusive remedy is to discontinue use.
U.S. GEOTRACES
http://www.geotraces.org/
U.S. GEOTRACES
GEOTRACES is a SCOR sponsored program; and funding for program infrastructure development is provided by the U.S. National Science Foundation.
GEOTRACES gained momentum following a special symposium, S02: Biogeochemical cycling of trace elements and isotopes in the ocean and applications to constrain contemporary marine processes (GEOSECS II), at a 2003 Goldschmidt meeting convened in Japan. The GEOSECS II acronym referred to the Geochemical Ocean Section Studies To determine full water column distributions of selected trace elements and isotopes, including their concentration, chemical speciation, and physical form, along a sufficient number of sections in each ocean basin to establish the principal relationships between these distributions and with more traditional hydrographic parameters;
* To evaluate the sources, sinks, and internal cycling of these species and thereby characterize more completely the physical, chemical and biological processes regulating their distributions, and the sensitivity of these processes to global change; and
* To understand the processes that control the concentrations of geochemical species used for proxies of the past environment, both in the water column and in the substrates that reflect the water column.
GEOTRACES will be global in scope, consisting of ocean sections complemented by regional process studies. Sections and process studies will combine fieldwork, laboratory experiments and modelling. Beyond realizing the scientific objectives identified above, a natural outcome of this work will be to build a community of marine scientists who understand the processes regulating trace element cycles sufficiently well to exploit this knowledge reliably in future interdisciplinary studies.
Expand "Projects" below for information about and data resulting from individual US GEOTRACES research projects.
U.S. GEOTRACES
largerWorkCitation
program
U.S. GEOTRACES East Pacific Zonal Transect (GP16)
http://www.geotraces.org/
U.S. GEOTRACES East Pacific Zonal Transect (GP16)
<p><strong>From the NSF Award Abstract</strong><br />
The mission of the International GEOTRACES Program (<a href="https://www.geotraces.org/" target="_blank">https://www.geotraces.org/</a>), of which the U.S. chemical oceanography research community is a founding member, is "to identify processes and quantify fluxes that control the distributions of key trace elements and isotopes in the ocean, and to establish the sensitivity of these distributions to changing environmental conditions" (GEOTRACES Science Plan, 2006). In the United States, ocean chemists are currently in the process of organizing a zonal transect in the eastern tropical South Pacific (ETSP) from Peru to Tahiti as the second cruise of the U.S.GEOTRACES Program. This Pacific section includes a large area characterized by high rates of primary production and particle export in the eastern boundary associated with the Peru Upwelling, a large oxygen minimum zone that is a major global sink for fixed nitrogen, and a large hydrothermal plume arising from the East Pacific Rise. This particular section was selected as a result of open planning workshops in 2007 and 2008, with a final recommendation made by the U.S.GEOTRACES Steering Committee in 2009. It is the first part of a two-stage plan that will include a meridional section of the Pacific from Tahiti to Alaska as a subsequent expedition.</p>
<p>This award provides funding for management of the U.S.GEOTRACES Pacific campaign to a team of scientists from the University of Southern California, Old Dominion University, and the Woods Hole Oceanographic Institution. The three co-leaders will provide mission leadership, essential support services, and management structure for acquiring the trace elements and isotopes samples listed as core parameters in the International GEOTRACES Science Plan, plus hydrographic and nutrient data needed by participating investigators. With this support from NSF, the management team will (1) plan and coordinate the 52-day Pacific research cruise described above; (2) obtain representative samples for a wide variety of trace metals of interest using conventional CTD/rosette and GEOTRACES Sampling Systems; (3) acquire conventional JGOFS/WOCE-quality hydrographic data (CTD, transmissometer, fluorometer, oxygen sensor, etc) along with discrete samples for salinity, dissolved oxygen (to 1 uM detection limits), plant pigments, redox tracers such as ammonium and nitrite, and dissolved nutrients at micro- and nanomolar levels; (4) ensure that proper QA/QC protocols are followed and reported, as well as fulfilling all GEOTRACES Intercalibration protocols; (5) prepare and deliver all hydrographic-type data to the GEOTRACES Data Center (and US data centers); and (6) coordinate cruise communications between all participating investigators, including preparation of a hydrographic report/publication.</p>
<p>Broader Impacts: The project is part of an international collaborative program that has forged strong partnerships in the intercalibration and implementation phases that are unprecedented in chemical oceanography. The science product of these collective missions will enhance our ability to understand how to interpret the chemical composition of the ocean, and interpret how climate change will affect ocean chemistry. Partnerships include contributions to the infrastructure of developing nations with overlapping interests in the study area, in this case Peru. There is a strong educational component to the program, with many Ph.D. students carrying out thesis research within the program.</p>
<p><em>Figure 1. The 2013 GEOTRACES EPZT Cruise Track. [click on the image to view a larger version]</em><br />
<a href="http://dmoserv3.whoi.edu/data_docs/GEOTRACES/EPZT/GEOTRACES_EPZT_TN303_CruiseTrack.png" target="_blank"><img alt="" src="https://datadocs.bco-dmo.org/d3/data_docs/GEOTRACES/EPZT/GEOTRACES_EPZT_TN303_CruiseTrack.png" /></a></p>
U.S. GEOTRACES EPZT
largerWorkCitation
project
U.S. GEOTRACES Pacific Section: Analysis of 230Th, 232Th and 231Pa
https://osprey.bco-dmo.org/project/643643
U.S. GEOTRACES Pacific Section: Analysis of 230Th, 232Th and 231Pa
<p>The International GEOTRACES program is a multi-national effort to survey (by a series of cross-ocean sections) and understand the global-ocean distribution of trace elements and isotopes in seawater. The GEOTRACES Science Plan has designated the natural radioisotopes 231Pa and 230Th to be key parameters inasmuch as their measurement on all sections is deemed to be critical to the success of entire international ocean science program</p>
<p>In this project, a research team from the Lamont- Doherty Earth Observatory of Columbia University and the University of Minnesota - Twin Cities will undertake measurement of the dissolved and particulate concentrations of 230Th and 231Pa on the US GEOTRACES Peru-Tahiti section, one of the American contributions to the global GEOTRACES effort. Additionally, they will measure dissolved and particulate 232Th concentrations and analyze a limited number of aerosol samples, aerosol leachates, and surface sediments for these radionuclides. These data will be used to: 1) Quantify the rates of boundary scavenging of 231Pa and 230Th associated with the biologically productive Peru upwelling system, 2) Quantify the rates of bottom scavenging of 231Pa and 230Th thought to be associated with resuspended sediments in nepheloid layers, 3) Quantify the uptake of dissolved Th and Pa by metalliferous particles associated with the hydrothermal plume emanating from the East Pacific Rise as well as by authigenic particles formed within the oxygen minimum zone, 4) Quantify the supply of lithogenic 232Th from margin sediments by the combined study of 232Th and 230Th, and 5) Quantify the supply of lithogenic 232Th from aerosols by the combined study of 232Th and 230Th.</p>
<p>Through collaboration with other US GEOTRACES investigators, the team expects that this work will provide unprecedented constraints on the processes that supply trace elements to the ocean as well as the processes that remove them.</p>
EPZT_Th_Pa
largerWorkCitation
project
eng; USA
oceans
Eastern Tropical Pacific - Transect from Peru to Tahiti
2017-01-24
From projects that focused on the following 2 locations: 1. Eastern Tropical Pacific - Transect from Peru to Tahiti (GP16) 2. Eastern Tropical South Pacific
0
BCO-DMO catalogue of parameters from Small and large particulate Th and Pa samples from different depth profiles collected on R/V Thomas G. Thompson in the Eastern Tropical Pacific during 2013 (EPZT Th Pa project)
Biological and Chemical Oceanography Data Management Office (BCO-DMO)
Unavailable
508-289-2009
WHOI MS#36
Woods Hole
MA
02543
USA
info@bco-dmo.org
http://www.bco-dmo.org
Monday - Friday 8:00am - 5:00pm
For questions regarding this resource, please contact BCO-DMO via the email address provided.
pointOfContact
http://lod.bco-dmo.org/id/dataset-parameter/676707.rdf
Name: cruise_id
Units: unitless
Description: <p>Ships cruise designation</p>
http://lod.bco-dmo.org/id/dataset-parameter/676709.rdf
Name: cruise_part
Units: unitless
Description: <p>Leg of cruise</p>
http://lod.bco-dmo.org/id/dataset-parameter/676710.rdf
Name: STNNBR
Units: unitless
Description: <p>Station number</p>
http://lod.bco-dmo.org/id/dataset-parameter/676711.rdf
Name: EVENT_LAT
Units: decimal degrees
Description: <p>Station latitude; N is positive</p>
http://lod.bco-dmo.org/id/dataset-parameter/676713.rdf
Name: EVENT_LON
Units: decimal degrees
Description: <p>Station longitude; E is positive</p>
http://lod.bco-dmo.org/id/dataset-parameter/676714.rdf
Name: DEPTH_MAX
Units: meters
Description: <p>Maximum depth of pump deployment</p>
http://lod.bco-dmo.org/id/dataset-parameter/676715.rdf
Name: CASTNO
Units: unitless
Description: <p>Cast number within a station</p>
http://lod.bco-dmo.org/id/dataset-parameter/676716.rdf
Name: GEOTRC_EVENTNO
Units: unitless
Description: <p>GEOTRACES event number</p>
http://lod.bco-dmo.org/id/dataset-parameter/676717.rdf
Name: DATE_START_EVENT
Units: unitless
Description: <p>Date sample was collected; yyyymmdd</p>
http://lod.bco-dmo.org/id/dataset-parameter/676718.rdf
Name: TIME_START_EVENT
Units: unitless
Description: <p>Time sample was collected; hhmm</p>
http://lod.bco-dmo.org/id/dataset-parameter/676720.rdf
Name: BTLNBR
Units: unitless
Description: <p>Sample bottle designation</p>
http://lod.bco-dmo.org/id/dataset-parameter/676721.rdf
Name: GEOTRC_SAMPNO
Units: unitless
Description: <p>GEOTRACES sample number</p>
http://lod.bco-dmo.org/id/dataset-parameter/676722.rdf
Name: lab
Units: unitless
Description: <p>Analystical lab</p>
http://lod.bco-dmo.org/id/dataset-parameter/676723.rdf
Name: Th_232_SP_CONC_PUMP
Units: pmol/kg
Description: <p>Small particulate Th-232 concentration</p>
http://lod.bco-dmo.org/id/dataset-parameter/676724.rdf
Name: Th_232_SP_CONC_PUMP_ERR
Units: pmol/kg
Description: <p>1 sigma error in small particulate Th-232</p>
http://lod.bco-dmo.org/id/dataset-parameter/676725.rdf
Name: Th_232_SP_CONC_PUMP_FLAG
Units: unitless
Description: <p>Flag for small particulate Th-232</p>
http://lod.bco-dmo.org/id/dataset-parameter/676726.rdf
Name: Th_230_SP_CONC_PUMP
Units: uBq/kg
Description: <p>Small particulate Th-230 concentration</p>
http://lod.bco-dmo.org/id/dataset-parameter/676727.rdf
Name: Th_230_SP_CONC_PUMP_ERR
Units: uBq/kg
Description: <p>1 sigma error in small particulate Th-230</p>
http://lod.bco-dmo.org/id/dataset-parameter/676729.rdf
Name: Th_230_SP_CONC_PUMP_FLAG
Units: unitless
Description: <p>Flag for small particulate Th-230</p>
http://lod.bco-dmo.org/id/dataset-parameter/676730.rdf
Name: Pa_231_SP_CONC_PUMP
Units: uBq/kg
Description: <p>Small particulate Pa-231 concentration</p>
http://lod.bco-dmo.org/id/dataset-parameter/676731.rdf
Name: Pa_231_SP_CONC_PUMP_ERR
Units: uBq/kg
Description: <p>1 sigma error in small particulate Pa-231</p>
http://lod.bco-dmo.org/id/dataset-parameter/676732.rdf
Name: Pa_231_SP_CONC_PUMP_FLAG
Units: unitless
Description: <p>Flag for small particulate Pa-231</p>
http://lod.bco-dmo.org/id/dataset-parameter/676734.rdf
Name: Th_232_LP_CONC_PUMP
Units: pmol/kg
Description: <p>Large particulate Th-232 concentration</p>
http://lod.bco-dmo.org/id/dataset-parameter/676735.rdf
Name: Th_232_LP_CONC_PUMP_ERR
Units: pmol/kg
Description: <p>1 sigma error in large particulate Th-232</p>
http://lod.bco-dmo.org/id/dataset-parameter/676736.rdf
Name: Th_232_LP_CONC_PUMP_FLAG
Units: unitless
Description: <p>Flag for large particulate Th-232</p>
http://lod.bco-dmo.org/id/dataset-parameter/676737.rdf
Name: Th_230_LP_CONC_PUMP
Units: uBq/kg
Description: <p>Large particulate Th-230 concentration</p>
http://lod.bco-dmo.org/id/dataset-parameter/676738.rdf
Name: Th_230_LP_CONC_PUMP_ERR
Units: uBq/kg
Description: <p>1 sigma error in large particulate Th-230</p>
http://lod.bco-dmo.org/id/dataset-parameter/676740.rdf
Name: Th_230_LP_CONC_PUMP_FLAG
Units: unitless
Description: <p>Flag for large particulate Th-230</p>
http://lod.bco-dmo.org/id/dataset-parameter/676741.rdf
Name: Pa_231_LP_CONC_PUMP
Units: uBq/kg
Description: <p>Large particulate Pa-231 concentration</p>
http://lod.bco-dmo.org/id/dataset-parameter/676742.rdf
Name: Pa_231_LP_CONC_PUMP_ERR
Units: uBq/kg
Description: <p>1 sigma error in large particulate Pa-231</p>
http://lod.bco-dmo.org/id/dataset-parameter/676743.rdf
Name: Pa_231_LP_CONC_PUMP_FLAG
Units: unitless
Description: <p>Flag for large particulate Pa-231</p>
http://lod.bco-dmo.org/id/dataset-parameter/676744.rdf
Name: Th_230_SP_ADS_CONC_PUMP
Units: uBq/kg
Description: <p>Small particulate adsorbed Th-230</p>
http://lod.bco-dmo.org/id/dataset-parameter/676745.rdf
Name: Th_230_SP_ADS_CONC_PUMP_ERR
Units: uBq/kg
Description: <p>1 sigma error in small particulate adsorbed Th-230</p>
http://lod.bco-dmo.org/id/dataset-parameter/676747.rdf
Name: Th_230_SP_XS_CONC_PUMP
Units: uBq/kg
Description: <p>Small particulate excess Th-230</p>
http://lod.bco-dmo.org/id/dataset-parameter/676748.rdf
Name: Th_230_SP_XS_CONC_PUMP_ERR
Units: uBq/kg
Description: <p>1 sigma error in small particulate excess Th-230</p>
http://lod.bco-dmo.org/id/dataset-parameter/676749.rdf
Name: Pa_231_SP_ADS_CONC_PUMP
Units: uBq/kg
Description: <p>Small particulate adsorbed Pa-231</p>
http://lod.bco-dmo.org/id/dataset-parameter/676750.rdf
Name: Pa_231_SP_ADS_CONC_PUMP_ERR
Units: uBq/kg
Description: <p>1 sigma error in small particulate adsorbed Pa-231</p>
http://lod.bco-dmo.org/id/dataset-parameter/676751.rdf
Name: Pa_231_SP_XS_CONC_PUMP
Units: uBq/kg
Description: <p>Small particulate excess Pa-231</p>
http://lod.bco-dmo.org/id/dataset-parameter/676753.rdf
Name: Pa_231_SP_XS_CONC_PUMP_ERR
Units: uBq/kg
Description: <p>1 sigma error in small particulate excess Pa-231</p>
http://lod.bco-dmo.org/id/dataset-parameter/676754.rdf
Name: Th_230_LP_ADS_CONC_PUMP
Units: uBq/kg
Description: <p>Large particulate adsorbed Th-230</p>
http://lod.bco-dmo.org/id/dataset-parameter/676755.rdf
Name: Th_230_LP_ADS_CONC_PUMP_ERR
Units: uBq/kg
Description: <p>1 sigma error in large particulate adsorbed Th-230</p>
http://lod.bco-dmo.org/id/dataset-parameter/676756.rdf
Name: Th_230_LP_XS_CONC_PUMP
Units: uBq/kg
Description: <p>Large particulate excess Th-230</p>
http://lod.bco-dmo.org/id/dataset-parameter/676757.rdf
Name: Th_230_LP_XS_CONC_PUMP_ERR
Units: uBq/kg
Description: <p>1 sigma error in large particulate excess Th-230</p>
http://lod.bco-dmo.org/id/dataset-parameter/676759.rdf
Name: Pa_231_LP_ADS_CONC_PUMP
Units: uBq/kg
Description: <p>Large particulate adsorbed Pa-231</p>
http://lod.bco-dmo.org/id/dataset-parameter/676760.rdf
Name: Pa_231_LP_ADS_CONC_PUMP_ERR
Units: uBq/kg
Description: <p>1 sigma error in large particulate adsorbed Th-230</p>
http://lod.bco-dmo.org/id/dataset-parameter/676761.rdf
Name: Pa_231_LP_XS_CONC_PUMP
Units: uBq/kg
Description: <p>Large particulate excess Pa-231</p>
http://lod.bco-dmo.org/id/dataset-parameter/676762.rdf
Name: Pa_231_LP_XS_CONC_PUMP_ERR
Units: uBq/kg
Description: <p>1 sigma error in large particulate excess Pa-231</p>
GB/NERC/BODC > British Oceanographic Data Centre, Natural Environment Research Council, United Kingdom
Biological and Chemical Oceanography Data Management Office (BCO-DMO)
Unavailable
508-289-2009
WHOI MS#36
Woods Hole
MA
02543
USA
info@bco-dmo.org
http://www.bco-dmo.org
Monday - Friday 8:00am - 5:00pm
For questions regarding this resource, please contact BCO-DMO via the email address provided.
pointOfContact
100710
https://datadocs.bco-dmo.org/file/B11vAg8HAWNMJN/EPZT_Particulate_Th_Pa.csv
EPZT_Particulate_Th_Pa.csv
Primary data file for dataset ID 676231
download
https://osprey.bco-dmo.org/dataset/676231/data/download
download
onLine
dataset
<p>Size-fractionated particles were collected using McLane Research in-situ pumps (WTS-LV) that had been modified to accommodate two flowpaths (Lam and Morris Patent pending).&nbsp;&nbsp; The wire-out was used to target depths during deployment, and a self-recording Seabird 19plus CTD deployed at the end of the line and RBR data loggers attached to three of the eight pumps were used to correct for actual depths during pumping.</p>
<p>Filter holders used were 142 mm-diameter “mini-MULVFS” style filter holders with two stages for two size fractions and multiple baffle systems designed to ensure even particle distribution and prevent particle loss (Bishop et al. 2012).&nbsp; One of two filter holder/flowpaths was loaded with a 51um Sefar polyester mesh prefilter followed by paired 0.8 um Pall Supor800 polyethersulfone filters.&nbsp; Each cast also had “dipped blank” filters deployed.&nbsp; These were the full filters sets (prefilter followed by paired Supor filters) sandwiched within a 1 um polyester mesh filter, loaded into perforated polypropylene containers, attached with plastic cable ties to a pump frame, and deployed.&nbsp; Dipped blank filters were exposed to seawater for the length of the deployment and processed and analyzed as regular samples, and thus functioned as full seawater process blanks.&nbsp; We analyzed either quarter (LDEO) or eighth (Minnesota) portions of the top and bottom filters from the “dipped” blank from 1 or more depths for all stations.</p>
<p>All filters and filter holders were acid leached prior to use according to methods recommended in the GEOTRACES sample and sample-handing Protocols (Geotraces 2010).</p>
<p><strong>Analytical methods for particulate radionuclides:</strong></p>
<p><strong>LDEO:</strong></p>
<p>Filters were folded into 60 mL Teflon jars and weighed aliquots of artificial isotope yield monitors&nbsp;229Th (1 pg) and&nbsp;233Pa (0.3-0.4 pg) and 7-8 mg dissolved Fe were added to each sample, which then sat overnight in 5 mL 16M HNO3&nbsp;&nbsp;[All acids and bases used were Fisher Chemical OPTIMA grade or equivalent from Trace Metal grade acids re-distilled in a Savillex™ DST-1000 sub-boiling still]. The next day, the filters were heated for ~1 hour at 180 deg C, at which point 4-5 ml HClO4&nbsp;was added and the hot plate temperature was increased to 220 deg C. Samples were heated until dense white fumes appeared. After 10-20 minutes, the samples were covered with a Teflon watch cover. After 30-60 minutes, rapid oxidation of the Supor material would occur, at which point the Supor material was almost completely broken down. The watch glasses were removed and beaker walls were rinsed down with 3 ml 8N HNO3.&nbsp;Ten drops of HF were added, and the samples were heated at 220 deg C until the HClO4&nbsp;dried down to a viscous residue.</p>
<p>The sample residue was taken up in dilute HCl, and transferred to 50 mL centrifuge tubes with Milli-Q water rinses. Fifteen to 25 drops of NH4OH were added to raise pH to 8-8.5 when iron (oxy)hydroxide precipitated. This precipitate was then centrifuged, supernatant was decanted, and the precipitate was washed with Milli-Q H2O. These step were repeated. The precipitate was then dissolved in 12 M HCl, ready for a series of anion-exchange chromatography steps to purify Th and Pa, as outlined in Anderson et. al., 2012. The purified Th and Pa solutions were dried down at 180-220 deg C in the presence of 2 drops of HClO4&nbsp;and taken up in 0.5 mL of 0.16 M HNO3/0.026 M HF for mass spectrometric analysis.</p>
<p>Concentrations of&nbsp;232Th,&nbsp;230Th and&nbsp;231Pa were calculated by isotope dilution, relative to the calibrated tracers&nbsp;229Th and&nbsp;233Pa added at the beginning of sample processing. Analyses were carried out on a Thermo-Finnegan ELEMENT XR Single Collector Magnetic Sector ICP-MS, equipped with a high-performance Interface pump (Jet Pump), and specially-designed sample (X) and skimmer (Jet) cones to ensure the highest possible sensitivity. All measurements were made in low-resolution mode (∆m/M≈300), peak jumping in Escan mode across the central 5% of the flat-topped peaks. Measurements were made on a MasCom^TM SEM;&nbsp;229Th,&nbsp;230Th, 231Pa and&nbsp;233Pa were measured in Counting mode, while the&nbsp;232Th signals were large enough that they were measured in Analog mode. Two solutions of SRM129, a natural U standard, were run multiple times throughout each run. One solution was in a concentration range where&nbsp;238U and&nbsp;235U were both measured in counting mode, allowing us to determine the mass bias/amu (typical values varied from -0.01/amu to 0.03/amu). In the other, more concentrated solution,&nbsp;238U was measured in Analog mode and&nbsp;235U was measured in Counting mode, yielding a measurement of the Analog/Counting Correction Factor.&nbsp; These corrections assume that the mass bias and Analog Correction Factor measured on U isotopes can be applied to Th and Pa isotope measurements. Each sample measurement was bracketed by measurement of an aliquot of the run solution, used to correct for the instrumental background count rates. To correct for tailing of&nbsp;232Th into the minor Th and Pa isotopes, a series of&nbsp;232Th standards were run at concentrations bracketing the expected&nbsp;232Th concentrations in the samples. The analysis routine for these standards was identical to the analysis routine for samples, so we could see the changing beam intensities at the minor masses as we increased the concentration of the&nbsp;232Th standards. The&nbsp;232Th count rates in our Pa fractions are quite small, reflecting mainly reagent blanks, compared to the&nbsp;232Th signal intensity in the Th fraction. The regressions of&nbsp;230Th,&nbsp;231Pa, and&nbsp;233Pa signals as a function of the&nbsp;232Th signal in the standards was used to correct for tailing of&nbsp;232Th in samples.</p>
<p>In addition to laboratory procedural blanks (reagents/labware blanks) and periodic measurements of an intercalibrated working standard solution of&nbsp;232Th,&nbsp;230Th and&nbsp;231Pa, SW STD 2010-1, referred to by Anderson et al. (2012), the participating labs also analyzed “dipped blank” filters, mentioned above, to determine the total blank, associated with the sample collection and handling in addition to the laboratory procedure. LDEO measured top and bottom dipped blanks separately, while UMN measured top and bottom dipped blanks together.</p>
<p>We pooled all procedural blank-corrected “dipped” blanks separately by institution to determine filter blank corrections. That is, the LDEO data were corrected by the LDEO average dipped blank values (both top and bottom included), while the UMN data were corrected by the UMN average dipped blank values. Averages for “Dipped” small particle filter blanks for a 1/4 filter fraction&nbsp;232Th,&nbsp;230Th, and&nbsp;231Pa at LDEO were 21.52 +/- 19.32 pg, 1.17 +/- 0.9 fg, and 0.07 +/- 0.07 fg, respectively.</p>
<p>Further details on analysis of seawater particulate radionuclides are given by Anderson et al. (2012).</p>
<p><strong>UMN:</strong></p>
<p>Filters were folded into 30 mL Teflon beaker and weighed aliquots of the artificial isotope yield monitors&nbsp;229Th and&nbsp;233Pa. Filters were first completely submerged in 7N HNO3&nbsp;acid combined with 10 drops HF, tightly covered with a Teflon threaded cap and heated for 10 hours at 200 deg F so that the particulate sample was dissolved/leached under pressure. The leach solution was then transferred to a second acid-cleaned Teflon beaker separate from the residual filter. Five drops of HClO4&nbsp;were then added to the leach solution in the second beaker.&nbsp; The original beaker walls and caps were washed with small amounts of weak HNO3&nbsp;and the resulting solution added to the second beaker. The solution was then dried down and was taken up in 2N HCl, and transferred to 15ml centrifuge tubes along with a 2N HCl rinse. One drop of dissolved Fe and six to nine drops of NH4OH were added to raise pH to 8-8.5 at which time iron (oxy)hydroxide precipitated.&nbsp; This precipitate was then centrifuged, decanted, washed with deionized H2O (&gt;18 MΩ), centrifuged, and dissolved in 14M HNO3&nbsp;and transferred to a Teflon beaker. It was then dried down and taken up in 7N HNO3&nbsp;for anion-exchange chromatography using AG1-X8, 100-200 mesh resin and a polyethylene frit. Initial separation was done on Teflon columns (internal diameter ~ 0.35cm) with a ~0.55 ml column volume (CV).&nbsp; The sample was loaded in one CV of 7N HNO3, followed by 1.5 CV of 7N HNO3, 3 CV of 8N HCl (collect Th fraction), and 3 CV of 8N HCl combined with 0.015N HF (collect Pa fraction).&nbsp; The Pa and Th fractions were then dried down in the presence of 2 drops of HClO4&nbsp;and taken up in 7N HNO3.&nbsp; They were each passed through second and third columns (each with ~0.55 ml column volumes) using similar elution schemes.&nbsp; The final Pa and Th fractions were then dried down in the presence of 2 drops of HClO4&nbsp;and dissolved in weak nitric acid for analysis on the mass spectrometer.</p>
<p>Concentrations of&nbsp;232Th,&nbsp;230Th and&nbsp;231Pa were calculated by isotope dilution using nuclide ratios determined on a Thermo-Finnigan Neptune mass spectrometer. All measurements were done using a peak jumping routine in ion counting mode on the discreet dynode multiplier behind the retarding potential quadrupole.&nbsp; A solution of&nbsp;233U-236U tracer was run to determine the mass bias correction (assuming that the mass fractionation for Th and Pa are the same as for U). Each sample measurement was bracketed by measurement of an aliquot of a wash solution, used to correct for the instrument background count rates on the masses measured.</p>
<p>Particulate samples were analyzed in batches of 37 to 39.&nbsp; An aliquot of an intercalibrated working standard solution of&nbsp;232Th,&nbsp;230Th and&nbsp;231Pa, SW STD 2010-1, was added to a separate acid-cleaned Teflon beaker along with weighed aliquots of&nbsp;229Th spike and&nbsp;233Pa spike. Spike and Standard were equilibrated for 3 days. The solution was then dried down and taken up in 7N HNO3&nbsp;for anion-exchange chromatography using AG1-X8, 100-200 mesh resin and a polyethylene frit, and processed like a sample. In addition to laboratory procedural blanks (reagents/labware blanks), a number of “dipped blank” filters were also processed like samples, to determine the total blank, associated with the sample collection and handling, in addition to the laboratory procedure.</p>
<p>At UMN, averages for “Dipped” small particle filter blanks for a 1/8 filter fraction were 13.06 +/- 15.43 pg&nbsp;232Th, 0.61 +/- 0.55 fg&nbsp;230Th, and 0.05 +/- 0.05 fg&nbsp;231Pa respectively. For large particles, the blanks for a 1/8 filter fraction were 11.89 +/- 9.90 pg&nbsp;232Th, 0.57 +/- 0.60 fg&nbsp;230Th, and 0.03 +/-&nbsp;0.02 fg&nbsp;231Pa.</p>
<p>Further details on Pa and Th analysis at the U. Minnesota laboratory are given in Shen et al. (2002, 2003, 2012), and Cheng et al. (2000, 2013).&nbsp;</p>
Specified by the Principal Investigator(s)
<p>The reported errors for radionuclide concentrations represent the propagation of one sigma errors based on the standard isotope ratios collected by ICP-MS, estimated error in the&nbsp;229Th or&nbsp;233Pa spike concentration, and the blank correction of the individual isotopes for each sample batch.</p>
<p>Individual uncertainties for thorium were calculated to include contributions from (a) blank correction using the variance of the blanks measured over the course of the analyses, (b) standard error of the ratios of the analysis (typically close to counting statistics) and (c) spike calibration. For&nbsp;Pa&nbsp;we also included assessment of the correction from the yield correction, mass&nbsp;bias&nbsp;and machine background. In order to assess the reproducibility of the procedure, repeat analyses were performed on the GEOTRACES 2010-1 standard (SW STD 2010-1). For standards run alongside EPZT particle samples at LDEO, the reproducibility for each isotope was 1.03% for&nbsp;230Th, 1.12% for&nbsp;232Th and 2.95% for&nbsp;231Pa. For standards run alongside EPZT particle samples at UMN, the reproducibility for each isotope was 0.24% for&nbsp;230Th, 0.6% for&nbsp;232Th and 0.65% for&nbsp;231Pa.</p>
<p><strong>Data Reporting:</strong></p>
<p>In some&nbsp;cases&nbsp;a sample was analyzed twice. &nbsp;The results of these replicated analyses are reported on separate lines in the data file.&nbsp;</p>
<p><strong>BCO-DMO Data Processing Notes:</strong></p>
<p>- Filled in blank cells with nd.<br />
- Changed column names to comply with GEOTRACES and BCO-DMO standards.<br />
- Added an ISO_DateTime_UTC column.</p>
Specified by the Principal Investigator(s)
asNeeded
7.x-1.1
Biological and Chemical Oceanography Data Management Office (BCO-DMO)
Unavailable
508-289-2009
WHOI MS#36
Woods Hole
MA
02543
USA
info@bco-dmo.org
http://www.bco-dmo.org
Monday - Friday 8:00am - 5:00pm
For questions regarding this resource, please contact BCO-DMO via the email address provided.
pointOfContact
SeaBird 19Plus
SeaBird 19Plus
PI Supplied Instrument Name: SeaBird 19Plus PI Supplied Instrument Description:Used to collect samples and measurements Instrument Name: CTD Sea-Bird Instrument Short Name:CTD Sea-Bird Instrument Description: A Conductivity, Temperature, Depth (CTD) sensor package from SeaBird Electronics. This instrument designation is used when specific make and model are not known or when a more specific term is not available in the BCO-DMO vocabulary. Refer to the dataset-specific metadata for more information about the specific CTD used. More information from: http://www.seabird.com/ Community Standard Description: http://vocab.nerc.ac.uk/collection/L05/current/130/
Niskin bottle
Niskin bottle
PI Supplied Instrument Name: Niskin bottle PI Supplied Instrument Description:Bottle used to collect water samples Instrument Name: Niskin bottle Instrument Short Name:Niskin bottle Instrument Description: A Niskin bottle (a next generation water sampler based on the Nansen bottle) is a cylindrical, non-metallic water collection device with stoppers at both ends. The bottles can be attached individually on a hydrowire or deployed in 12, 24, or 36 bottle Rosette systems mounted on a frame and combined with a CTD. Niskin bottles are used to collect discrete water samples for a range of measurements including pigments, nutrients, plankton, etc. Community Standard Description: http://vocab.nerc.ac.uk/collection/L22/current/TOOL0412/
in situ pumps
in situ pumps
PI Supplied Instrument Name: in situ pumps PI Supplied Instrument Description:Used to collected size fractioned particles Instrument Name: Pump Instrument Short Name: Instrument Description: A pump is a device that moves fluids (liquids or gases), or sometimes slurries, by mechanical action. Pumps can be classified into three major groups according to the method they use to move the fluid: direct lift, displacement, and gravity pumps
Cruise: TN303
TN303
R/V Thomas G. Thompson
Community Standard Description
International Council for the Exploration of the Sea
R/V Thomas G. Thompson
vessel
TN303
James W. Moffett
University of Southern California
http://dmoserv3.whoi.edu/data_docs/GEOTRACES/EPZT/GT13_EPZT_ODFReport_All.pdf
Report describing TN303
R/V Thomas G. Thompson
Community Standard Description
International Council for the Exploration of the Sea
R/V Thomas G. Thompson
vessel