<div><p>Samples were collected from the Sage Lot Pond salt marsh tidal creek in Waquoit Bay, MA at approx. 41.5546N, 70.5071W.</p>
<p>Discrete bottle samples were collected at ~30 cm above the bottom of the tidal creek every 1-2 h at the sampling site using a peristaltic or diaphragm pump for periods of a full tidal cycle (~12–14 h). DIC collection and analysis followed standard best practice procedures outlined by Dickson et al. (2007). Samples were collected through purgeable capsule filters with 0.45 μm pore size (Farrwest Environmental Supply, Texas, USA) into 250 mL borosilicate bottles, poisoned with 100 uL saturated mercuric chloride, sealed with a glass stopper coated with APIEZON® – L grease, and se- cured with a rubber band.</p>
<p>DIC was analyzed using an Apollo SciTech DIC auto-analyzer (Model AS-C3), which uses a nondispersive infrared (NDIR) method. The sample is acidified with a 10% phosphoric acid in 10% sodium chloride solution, and CO2 is purged with high purity nitrogen gas and measured by a LI-COR 7000 infrared analyzer (LI-COR Environmental, Nebraska, USA). Certified Reference Material (CRM) from Dr. A. Dickson at Scripps Institution of Oceanography was used to calibrate the DIC auto-analyzer at least once daily. In addition, CRM was measured as a sample every few hours to gauge and correct any potential drift. The precision and accuracy of the instrument was ~ ±2.0 μmol kg-1.</p>
<p>TA was measured with an Apollo SciTech alkalinity auto-titrator (Model AS-ALK2), a Ross combination pH electrode and a pH meter (ORION 3 Star) to perform a modified Gran titration [Wang and Cai, 2004]. The electrode and concentration of hydrochloric acid was calibrated every day. The CRMs were also measured as samples every few hours to correct any potential small drift. The accuracy and precision of the instrument was about ± 2.0 μmol kg-1.</p>
<p>An EXO2 Multiparameter Sonde (YSI Inc., Yellow Springs, OH) was submerged in the tidal creek to measure temperature and salinity. The YSI EXO2 recorded at intervals ranging from 2 min to 8 min. Reported YSI EXO2 sensor accuracy specifications are: 1% of the reading for salinity and 0.05 °C for temperature.</p></div>
Discrete bottle sample measurements for carbonate chemistry
Salt marsh carbonate chemistry
<div><p>All EXO2 sensors were cleaned and calibrated regularly according to manufacturer recommended methods to maintain performance, and antifouling measures were deployed including copper and automated wiping. After a deployment period of 2–4 weeks, YSI EXO2 data were evaluated for fouling and calibration drift. The YSI EXO2 was recalibrated and a correction factor based on calibration standards was applied linearly across the deployment as needed. A maximum correction up to ± 30% of the calibration value was allowed or otherwise discarded (Wagner et al., 2006). Salinity and temperature values were interpolated to match the same time as the bottle sample collection.</p>
<p>BCO-DMO Processing:<br />
- modified parameter names (replaced spaces with underscores; removed units of measurement);<br />
- formatted date/time to ISO format;<br />
- replaced blanks with "nd" ("no data)".</p></div>
768577
Salt marsh carbonate chemistry
2019-05-24T13:09:22-04:00
2019-05-24T13:09:22-04:00
2023-07-07T16:10:26-04:00
urn:bcodmo:dataset:768577
Discrete bottle sample measurements for carbonate chemistry from samples collected in the Sage Lot Pond salt marsh tidal creek in Waquoit Bay, MA from 2012 to 2015
Discrete bottle sample measurements for carbonate chemistry from samples collected in the Sage Lot Pond salt marsh tidal creek in Waquoit Bay, MA from 2012 to 2015.
false
Wang, Z. A., Gonneea, M., Kroeger, K. (2019) Discrete bottle sample measurements for carbonate chemistry from samples collected in the Sage Lot Pond salt marsh tidal creek in Waquoit Bay, MA from 2012 to 2015. Biological and Chemical Oceanography Data Management Office (BCO-DMO). (Version 1) Version Date 2019-05-23 [if applicable, indicate subset used]. doi:10.1575/1912/bco-dmo.768577.1 [access date]
true
1
10.1575/1912/bco-dmo.768577.1
false
2019-05-23
Datapackage.json
Frictionless Data Package
https://www.bco-dmo.org/dataset/768577/datapackage.json
application/vnd.datapackage+json
PDF
https://www.bco-dmo.org/dataset/768577/Dataset_description.pdf
application/pdf
ISO 19115-2 (NOAA Profile)
https://www.bco-dmo.org/dataset/768577/iso
application/xml
http://www.isotc211.org/2005/gmd-noaa
Dublin Core
https://www.bco-dmo.org/dataset/768577/dublin-core
application/xml
http://purl.org/dc/elements/1.1/
768577
http://lod.bco-dmo.org/id/dataset/768577
2012-04-09 - 2015-12-16
2012-04-09
2012-04-09
---09
99
--04
2012
2015-12-16
2015-12-16
---16
349
--12
2015
OSPREY
http://www.opengis.net/def/crs/OGC/1.3/CRS84
<http://www.opengis.net/def/crs/OGC/1.3/CRS84> POINT (-70.5071 41.5546)
41.5546
-70.5071
41.554600000000
-70.507100000000
VIEW TABLE
https://erddap.bco-dmo.org/erddap/tabledap/bcodmo_dataset_768577.htmlTable
text/html
SUBSET DATA
https://erddap.bco-dmo.org/erddap/tabledap/bcodmo_dataset_768577.html
text/html
CSV
https://erddap.bco-dmo.org/erddap/tabledap/bcodmo_dataset_768577.csv
text/csv
TSV
https://erddap.bco-dmo.org/erddap/tabledap/bcodmo_dataset_768577.tsv
text/tsv
MATLAB
https://erddap.bco-dmo.org/erddap/tabledap/bcodmo_dataset_768577.mat
text/x-matlab
netCDF
https://erddap.bco-dmo.org/erddap/tabledap/bcodmo_dataset_768577.nc
application/x-netcdf