19:I[42426,["/_next/static/immutable/chunks/1xctgzqre-wsy.js","/_next/static/immutable/chunks/06_-wz6pdtp2b.js","/_next/static/immutable/chunks/30e52g49hg40p.js","/_next/static/immutable/chunks/02yq6tul2z-oh.js","/_next/static/immutable/chunks/10bx_ec2vj7n_.js","/_next/static/immutable/chunks/33bfn03fo8xnt.js","/_next/static/immutable/chunks/0tfjf78scu61b.js","/_next/static/immutable/chunks/31xnvej4n1bi9.js"],"default"] 1a:Tdfc,

Intact sediments were collected and brought inside the ship's laboratory for profiling within 30 minutes after sampling. Each sediment core was profiled with a single non-invasive mercury/gold (Hg/Au) voltammetric microelectrode deployed on a computer-controlled micromanipulator along with an M-414 combination pH mini-electrode (Microelectrodes, Inc.). Dissolved oxygen (O2(aq)), manganese (Mn2+), iron (Fe2+), organic-Fe(III) complexes (Org-Fe(III)), aqueous clusters of FeS (FeS(aq)), thiosulfate (S2O32-), and total dissolved sulfide (SH2S = H2S + HS- + S(0) + Sx2-) were detected voltammetrically using either linear sweep voltammetry (LSV) for O2(aq) or cathodic square-wave voltammetry (CSWV) for the other species (Luther et al., 2008). Each voltammetric microelectrode was fabricated in-house and prepared by polishing the 100-micrometer (µm) gold tip to a mirror-like surface with diamond pastes of different sizes (15, 6, 1, and ¼ µm, Buehler Inc.), electroplating a liquid mercury layer on the Au surface at -0.2 volts (V) for 4 minutes, and calibrating for Mn2+ in degassed seawater according to previously published methods (Brendel and Luther, 1995). Voltammetric microelectrode quality was determined before calibration by measuring O2(aq) in a fully aerated 0.54 molar (M) NaCl solution by LSV. Dissolved oxygen is reduced to water at the electrode surface in two steps of two-electron transfer with the formation of hydrogen peroxide (H2O2) as intermediate species. As a result, good electrodes should produce two linear sweep waves of the same shape and current intensity. Electrodes that passed this quality test were calibrated for deployment in the sediment cores. Mn2+ calibrations were obtained by CSWV using at least five standard additions of a 0.1 M Mn2+ stock to a 0.54 M NaCl solution degassed with UHP N2 before calibration. Dissolved oxygen measured by LSV was calibrated ex situ in the overlying waters of sediment cores collected during the same cast by Winkler titration. Dissolved Fe2+ and SH2S were quantified by the pilot ion method using Mn2+ as the pilot ion (Luther et al., 2008; Tercier-Weber and Taillefert, 2009). Org-Fe(III) and FeS(aq) cannot be quantified by these methods and are reported in current intensities. Finally, the pH on the total scale was determined by measuring the temperature and electrode potential of both samples and a TRIS buffer in NaCl 0.54 M, then using the Nernst equation to calculate the pH of the samples (Skoog and Leary, 1996). Errors of all reported concentrations and current intensities represent the standard deviation of at least three replicate measurements at each depth in the sediment core.

Instruments:
Sediment cores were collected with an MC-800 multi-corer (Ocean Instruments). Core barrels of 10-centimeter (cm) inner diameter and 75 cm long were used to collect sediments. A DLK-70 Electrochemical analyzer with electrode stand (STAND-1) and EX-MAN-1 micromanipulator (Analytical Instrument Systems, Inc.) was used for all electrochemical analyses, including voltammetric scans and potential measurements at the pH minielectrode.

Known Issues or Problems:
"nd" in the data set is provided when the chemical species were not determined, typically because of electrochemical noise issues on the ship, or because the electrochemical technique was not applied (e.g., the CSWV technique was not applied in the overlying waters). All data sets provided have been analytically validated using the procedures described above.

1b:T792,

Data Processing:
Voltammetric data were integrated using Voltint, an Matlab-based software developed in-house to identify and quantify the waves (O2, H2O2) by LSV or peaks (S2O32-, SH2S, Mn2+, Fe2+, Org-Fe(III), FeS(aq)) by CSWV (Bristow and Taillefert, 2008). As H2O2 is produced by reduction of O2(aq) at the electrode surface, it is not considered a species that is measurable in situ and is not reported in the data set. The potential of the pH mini-electrode is collected independently before the voltammetric scans and reported in the header of each scan. It is extracted from the headers by Voltint. The filename, potential, current, and surface area of each voltammetric peak quantified in the CSWV files as well as the filename, and potential of the pH mini-electrodes are automatically saved in two different files that can be processed further. The filename, potential, and limiting current of the O2(aq) and H2O2 waves quantified in the LSV scans are saved in a third file that can be processed further. Finally, a Matlab-based software was written to calculate the mean and standard deviation of the currents (and surface area for CSWV data) at each depth in the profiles before quantification of O2 by external calibrations and the other species by the pilot ion method. The Matlab-based software also calculates the average and standard deviation of the pH measurements at each depth.

In the data file, standard deviations of the mean of at least triplicate electrochemical measurements are provided with each parameter.

BCO-DMO Processing:
- imported original file named "GOM_Fall2020_VoltammetryData_BCO-DMO.xlsx" into the BCO-DMO system;
- added "Date" column from the separate "Year", "Month", and "Day" columns;
- renamed fields to comply with BCO-DMO naming conventions;
- named the final file "904782_v1_electrochemical_data.csv".

1c:Tc1a,NSF Award Abstract Ocean acidification is the process that lowers the pH of the ocean over time due to uptake of atmospheric carbon dioxide. This project investigates how chemical reactions in marine sediments exposed to high riverine sediment loads influence ocean acidification in coastal waters. Although we know that ocean acidification affects marine life and commercial fisheries in coastal waters, little is known about how acidification processes in the water column are influenced by reactions occurring in sediments on the sea floor. The role of large sediment deposits from rivers in these processes has also never been investigated. This study will be conducted in the Mississippi River and Gulf of Mexico. The Mississippi River transports a high sediment load to the continental shelf in the Gulf of Mexico and plays an important role in the economy of the southern coast of the United States. Results from this study will be useful to the oceanographic community for increasing understanding of ocean acidification processes in delta and shelf environments. It will also benefit decision makers interested in predicting the role of sediments on the nutrient -rich Louisiana shelf for discharge control purposes. This project also has an important educational component by training undergraduate, graduate, and postdoctoral students, providing experiences at sea for undergraduates, and conducting outreach activities with K-12 students. The geochemical and microbiological processes responsible for the transformation of particles deposited on the seafloor will be characterized near the Mississippi River mouth and along the nearby continental slope. The release of acids (CO2) and bases (alkalinity) from the sediment will be quantified using autonomous instruments deployed on the seafloor to determine whether sediments contribute to the acidity of the surrounding water column or instead provide bases to buffer the water column from atmospheric CO2 inputs. As the Mississippi River discharge during the later Winter and Spring provides much more sediment to the coastal zone compared to the rest of the year, research cruises will be taken twice a year to determine how seasonal variations in riverine discharge affect the release of acids and bases into the water column. Mathematical models will then be used to predict the effect of seasonal variations on acids or bases release to the water column. This study will therefore provide a quantitative understanding of the role of large sediment depositions to the seafloor on sediment geochemical and microbiological processes and their feedback to the overlying waters. Simultaneously, a large data set will be generated and used to calibrate mathematical models and better characterize benthic-pelagic interactions. Such efforts are needed to predict how continental margins respond to constantly increasing stress from anthropogenic activities. This award reflects NSF's statutory mission and has been deemed worthy of support through evaluation using the Foundation's intellectual merit and broader impacts review criteria.6:["$","$L19",null,{"dataset":{"_id":"904782","description":"","problem":"","acquisition":"$1a","processing":"$1b","bcodmoProcessing":"","title":"Electrochemical data from sediment cores collected on the Louisiana Shelf of the Northern Gulf of Mexico during November 2020 on R/V Savannah cruise SAV-20-07","nickname":"Northern Gulf of Mexico electrochemical data Fall 2020","dataUrl":"","currentState":"Final no updates expected","currentStateId":"7","validated":true,"restricted":false,"version":"1","version_date":"2023-07-20T04:00:00.000Z","abstract":"This data set reports sediment depth profiles of dissolved O2, Mn2+, Fe2+, and total dissolved sulfide (SH2S) concentrations, as well as pH and current intensities of organic-Fe(III) complexes and aqueous clusters of FeS (FeS(aq)) that cannot be quantified directly. These data were obtained by profiling intact sediment cores using voltammetric and pH microelectrodes deployed on a computer-operated micromanipulator. Sediment cores were collected at five different stations on the Louisiana Shelf on the Northern Gulf of Mexico during the week of November 3-6, 2020 using an MC-800 multi-corer. These stations extend from the middle of the shelf offshore from Cocodrie, LA to the mouth of the Mississippi River North West Pass. All depth profiles were started within 30 minutes after collection. The field sampling was conducted during R/V Savannah cruise SAV-20-07.","citation":"Taillefert, M. (2024) Electrochemical data from sediment cores collected on the Louisiana Shelf of the Northern Gulf of Mexico during November 2020 on R/V Savannah cruise SAV-20-07. Biological and Chemical Oceanography Data Management Office (BCO-DMO). (Version 1) Version Date 2023-07-20 [if applicable, indicate subset used]. doi:10.26008/1912/bco-dmo.904782.1 [access date]","citationParts":{"identifier":"doi:10.26008/1912/bco-dmo.904782.1","versionDate":"2023-07-20","versionId":"1","year":"2024","title":"Electrochemical data from sediment cores collected on the Louisiana Shelf of the Northern Gulf of Mexico during November 2020 on R/V Savannah cruise SAV-20-07","authors":"Taillefert, M.","publisher":"Biological and Chemical Oceanography Data Management Office (BCO-DMO)."},"doi":"10.26008/1912/bco-dmo.904782.1","release_date":null,"field_dataset_location":"","temporal_extent":{"start":"2020-11-03T05:00:00.000Z","end":"2020-11-06T05:00:00.000Z"},"temporal":{"resolution":"time:unitDay","type":"time:Interval","start":{"value":"1604379600","label":"2020-11-03"},"end":{"value":"1604638800","label":"2020-11-06"}},"spatial_extent":{"shape":"polygon","center":{"latitude":28.758450000026,"longitude":-89.951750000082},"wkt":"POLYGON ((-90.3041 28.6035, -89.5994 28.6035, -89.5994 28.9134, -90.3041 28.9134, -90.3041 28.6035))","north":28.9134,"east":-89.5994,"south":28.6035,"west":-90.3041},"dataset_type":["Cruise Results"],"keywords":["oceans"],"data_files":[{"id":"931550","title":"904782_v1_electrochemical_data.csv","url":"https://datadocs.bco-dmo.org/dataset/904782/file/KABgwB7SqE0z3E/904782_v1_electrochemical_data.csv","showTableUrl":"https://www.bco-dmo.org/dataset/904782/data/view/931550","description":"Primary data file for dataset ID 904782, version 1.","filename":"904782_v1_electrochemical_data.csv","bytesize":40504,"checksum":{"value":"423b9b700541a0ebcdce275fa7b3ed59","Algorithm":{"_id":"190","name":"MD5"}},"mimetype":"text/csv","fileType":{"_id":"192","name":"Comma Separated Values (.csv)"},"isErddap":"bcodmo_dataset_904782_v1","date":"","isPublicDuringEmbargo":false,"primaryDataFile":true,"showTable":true,"restricted":false}],"supplemental_files":[],"roles":[{"role":{"_id":"138","name":"Principal Investigator"},"performedBy":{"_id":"743721","name":"Martial Taillefert"},"performedAtOrganization":{"_id":"182","name":"Georgia Institute of Technology"}},{"role":{"_id":"145","name":"BCO-DMO Data Manager"},"performedBy":{"_id":"51498","name":"Shannon Rauch"},"performedAtOrganization":{"_id":"191","name":"Woods Hole Oceanographic Institution"}}],"deployments":[{"_id":"904422","name":"SAV-20-07","synonyms":["Benthic Alkalinity Flux"],"dates":{"start":"2020-10-23T00:00:00.000Z","end":"2020-11-21T00:00:00.000Z"},"platform":{"_id":"54232","name":"R/V Savannah"},"chiefScientists":[{"id":"743721","name":"Martial Taillefert","role":"Chief Scientist"}]}],"funding":[{"_id":"894878","name":"OCE-1948914","fundingSource":{"_id":"355","name":"NSF Division of Ocean Sciences"},"url":"https://www.nsf.gov/awardsearch/show-award?AWD_ID=1948914"}],"instruments":[{"_id":"904791","name":"EX-MAN-1 micromanipulator (Analytical Instrument Systems, Inc.)","description":"A DLK-70 Electrochemical analyzer with electrode stand (STAND-1) and EX-MAN-1 micromanipulator (Analytical Instrument Systems, Inc.) was used for all electrochemical analyses, including voltammetric scans and potential measurements at the pH minielectrode.","type_id":"904799","type_name":"micromanipulator","type_desc":"A micromanipulator is an apparatus used to physically interact with a sample under a microscope.","type_acronym":""},{"_id":"904789","name":"MC-800 multi-corer","description":"Sediment cores were collected with an MC-800 multi-corer (Ocean Instruments). Core barrels of 10 centimeters (cm) inner diameter and 75 cm long were used to collect sediments.","type_id":"532","type_name":"Multi Corer","type_desc":"The Multi Corer is a benthic coring device used to collect multiple, simultaneous, undisturbed sediment/water samples from the seafloor. Multiple coring tubes with varying sampling capacity depending on tube dimensions are mounted in a frame designed to sample the deep ocean seafloor. For more information, see Barnett et al. (1984) in Oceanologica Acta, 7, pp. 399-408.","type_acronym":"Multi Corer"},{"_id":"904849","name":"pH microelectrodes","description":"","type_id":"674","type_name":"pH Sensor","type_desc":"An instrument that measures the hydrogen ion activity in solutions.\r\n\r\nThe overall concentration of hydrogen ions is inversely related to its pH. The pH scale ranges from 0 to 14 and indicates whether acidic (more H+) or basic (less H+). ","type_acronym":"pH Sensor"},{"_id":"904798","name":"DLK-70 Electrochemical analyzer with electrode stand","description":"A DLK-70 Electrochemical analyzer with electrode stand (STAND-1) and EX-MAN-1 micromanipulator (Analytical Instrument Systems, Inc.) was used for all electrochemical analyses, including voltammetric scans and potential measurements at the pH minielectrode.","type_id":"698","type_name":"Voltammetry Analyzers","type_desc":"Instruments that obtain information about an analyte by applying a potential and measuring the current produced in the analyte.","type_acronym":"Voltammetry Analyzers"}],"parameters":[{"_id":"904822","name":"Year","format":"%Y","frictionlessType":"date","description":"

4-digit year when samples were collected

","units":{"_id":"","name":"unitless"},"type":{"_id":"1062","name":"year","description":"

year, reported as YYYY, e.g. 1995

"}},{"_id":"904823","name":"Month","format":"%B","frictionlessType":"date","description":"

Month when samples were collected

","units":{"_id":"","name":"unitless"},"type":{"_id":"1115","name":"month","description":"

Month of year; numeric 1 to 12.

"}},{"_id":"904824","name":"Day","format":"%d","frictionlessType":"date","description":"

Day of month when samples were collected

","units":{"_id":"","name":"unitless"},"type":{"_id":"1113","name":"day","description":"

day of month; numeric 1 to 31

"}},{"_id":"904825","name":"Date","format":"%Y-%m-%d","frictionlessType":"date","description":"

Date when samples were collected

","units":{"_id":"","name":"unitless"},"type":{"_id":"1070","name":"date","description":"

date; generally reported in GMT as YYYYMMDD (year; month; day); also as MMDD (month; day); EqPac dates are local Hawaii time. ISO_Date format is YYYY-MM-DD (http://www.iso.org/iso/home/standards/iso8601.htm)

"}},{"_id":"904826","name":"Collection_Type","format":"","frictionlessType":"string","description":"

Type of sample collection (Voltammetry)

","units":{"_id":"","name":"unitless"},"type":{"_id":"1741","name":"sample_descrip","description":"

text description or other traits of the sample collected

"}},{"_id":"904827","name":"Station","format":"","frictionlessType":"string","description":"

Station identifier

","units":{"_id":"","name":"unitless"},"type":{"_id":"987","name":"station","description":"

Station identifier; a unique number or alphanumeric string designating a general geographic location at which one or more sampling activities may occur.

"}},{"_id":"904828","name":"Lon","format":"","frictionlessType":"number","description":"

Longitude where samples were collected; negative values = West

","units":{"_id":"","name":"decimal degrees"},"type":{"_id":"731","name":"longitude","description":"

longitude, in decimal degrees, East is positive, negative denotes West; Reported in some datasets as degrees, minutes

"}},{"_id":"904829","name":"Lat","format":"","frictionlessType":"number","description":"

Latitude where samples were collected; positive values = North

","units":{"_id":"","name":"decimal degrees"},"type":{"_id":"730","name":"latitude","description":"

latitude, in decimal degrees, North is positive, negative denotes South; Reported in some datasets as degrees, minutes

"}},{"_id":"904830","name":"Sediment_depth","format":"","frictionlessType":"number","description":"

Sediment depth

","units":{"_id":"","name":"centimeters (cm)"},"type":{"_id":"1136","name":"depth_core","description":"

depth in core; mid-point of interval sampled

"}},{"_id":"904831","name":"pH","format":"","frictionlessType":"number","description":"

","units":{"_id":"","name":"unitless (pH scale)"},"type":{"_id":"1892","name":"pH","description":"

pH: The measure of the acidity or basicity of an aqueous solution

"}},{"_id":"904832","name":"O2","format":"","frictionlessType":"number","description":"

Dissolved oxygen

","units":{"_id":"","name":"micrometers (uM)"},"type":{"_id":"910","name":"dissolved Oxygen","description":"

dissolved oxygen concentration

"}},{"_id":"904833","name":"sd_O2","format":"","frictionlessType":"number","description":"

Standard deviation of O2

","units":{"_id":"","name":"micrometers (uM)"},"type":{"_id":"910","name":"dissolved Oxygen","description":"

dissolved oxygen concentration

"}},{"_id":"904834","name":"Mn_II","format":"","frictionlessType":"number","description":"

Reduced manganese (Mn2+)

","units":{"_id":"","name":"micrometers (uM)"},"type":{"_id":"490516","name":"Mn","description":"

Manganese (Mn). Concentrations may be reported in parts per million, nanomoles per liter, or other units. Refer to dataset metadata for units.

"}},{"_id":"904835","name":"sd_Mn_II","format":"","frictionlessType":"number","description":"

Standard deviation of Mn_II

","units":{"_id":"","name":"micrometers (uM)"},"type":{"_id":"490516","name":"Mn","description":"

Manganese (Mn). Concentrations may be reported in parts per million, nanomoles per liter, or other units. Refer to dataset metadata for units.

"}},{"_id":"904836","name":"Fe_II","format":"","frictionlessType":"number","description":"

Electrochemical labile reduced iron (Fe2+)

","units":{"_id":"","name":"micrometers (uM)"},"type":{"_id":"1981","name":"Fe","description":"

Iron (Fe). Concentrations may be reported in parts per million, nanomoles per liter, or other units. Refer to dataset metadata for units.

"}},{"_id":"904837","name":"sd_Fe_II","format":"","frictionlessType":"number","description":"

Standard deviation of Fe_II

","units":{"_id":"","name":"micrometers (uM)"},"type":{"_id":"1981","name":"Fe","description":"

Iron (Fe). Concentrations may be reported in parts per million, nanomoles per liter, or other units. Refer to dataset metadata for units.

"}},{"_id":"904838","name":"SH2S","format":"","frictionlessType":"number","description":"

Total dissolved sulfides

","units":{"_id":"","name":"micrometers (uM)"},"type":{"_id":"840800","name":"hydrogen sulfide","description":"

Hydrogen sulfide (H2S): A sulfur hydride consisting of a single sulfur atom bonded to two hydrogen atoms. A highly poisonous, flammable gas with a characteristic odor of rotten eggs, it is often produced by bacterial decomposition of organic matter in the absence of oxygen.

"}},{"_id":"904839","name":"sd_SH2S","format":"","frictionlessType":"number","description":"

Standard deviation of SH2S

","units":{"_id":"","name":"micrometers (uM)"},"type":{"_id":"840800","name":"hydrogen sulfide","description":"

"}},{"_id":"904840","name":"S2O3","format":"","frictionlessType":"number","description":"

Thiosulfate (S2O32-)

","units":{"_id":"","name":"micrometers (uM)"},"type":{"_id":"904820","name":"thiosulfate","description":"

Thiosulfate (S₂O₃²⁻): A divalent inorganic anion obtained by removal of both protons from thiosulfuric acid.

"}},{"_id":"904841","name":"sd_S2O3","format":"","frictionlessType":"number","description":"

Standard deviation of S2O3

","units":{"_id":"","name":"micrometers (uM)"},"type":{"_id":"904820","name":"thiosulfate","description":"

Thiosulfate (S₂O₃²⁻): A divalent inorganic anion obtained by removal of both protons from thiosulfuric acid.

"}},{"_id":"904842","name":"Org_Fe_III","format":"","frictionlessType":"number","description":"

Organic Fe(III) complexes

","units":{"_id":"","name":"nanoampere (nA)"},"type":{"_id":"1981","name":"Fe","description":"

Iron (Fe). Concentrations may be reported in parts per million, nanomoles per liter, or other units. Refer to dataset metadata for units.

"}},{"_id":"904843","name":"sd_Org_Fe_III","format":"","frictionlessType":"number","description":"

Standard deviation of Org_Fe_III

","units":{"_id":"","name":"nanoampere (nA)"},"type":{"_id":"1981","name":"Fe","description":"

Iron (Fe). Concentrations may be reported in parts per million, nanomoles per liter, or other units. Refer to dataset metadata for units.

"}},{"_id":"904844","name":"FeS_aq","format":"","frictionlessType":"number","description":"

Aqueous clusters of FeS

","units":{"_id":"","name":"nanoampere (nA)"},"type":{"_id":"1981","name":"Fe","description":"

Iron (Fe). Concentrations may be reported in parts per million, nanomoles per liter, or other units. Refer to dataset metadata for units.

"}},{"_id":"904845","name":"sd_FeS_aq","format":"","frictionlessType":"number","description":"

Standard deviation of FeS_aq

","units":{"_id":"","name":"nanoampere (nA)"},"type":{"_id":"1981","name":"Fe","description":"

Iron (Fe). Concentrations may be reported in parts per million, nanomoles per liter, or other units. Refer to dataset metadata for units.

"}}],"related_publications":[{"id":"813149","citation":"Brendel, P. J., & Luther, G. W. I. (1995). Development of a Gold Amalgam Voltammetric Microelectrode for the Determination of Dissolved Fe, Mn, O2, and S(-II) in Porewaters of Marine and Freshwater Sediments. Environmental Science & Technology, 29(3), 751–761. doi:10.1021/es00003a024\r\n","relation_type":["Methods"],"relation_desc":""},{"id":"786415","citation":"Bristow, G., & Taillefert, M. (2008). VOLTINT: A Matlab®-based program for semi-automated processing of geochemical data acquired by voltammetry. Computers & Geosciences, 34(2), 153–162. doi:10.1016/j.cageo.2007.01.005\r\n","relation_type":["Methods"],"relation_desc":""},{"id":"745863","citation":"Luther, G. W., Glazer, B. T., Ma, S., Trouwborst, R. E., Moore, T. S., Metzger, E., … Brendel, P. J. (2008). Use of voltammetric solid-state (micro)electrodes for studying biogeochemical processes: Laboratory measurements to real time measurements with an in situ electrochemical analyzer (ISEA). Marine Chemistry, 108(3-4), 221–235. doi:10.1016/j.marchem.2007.03.002\r\n","relation_type":["Methods"],"relation_desc":""},{"id":"904813","citation":"Skoog, D. A., Holler, F. J., & Nieman, T. A. (1998). Principles of instrumental analysis (5th ed., Ser. Saunders golden sunburst series). Saunders College Publ.","relation_type":["Methods"],"relation_desc":""},{"id":"904815","citation":"Taillefert, M., Bono, A. B., & Luther, G. W. (2000). Reactivity of Freshly Formed Fe(III) in Synthetic Solutions and (Pore)Waters: Voltammetric Evidence of an Aging Process. Environmental Science & Technology, 34(11), 2169–2177. https://doi.org/10.1021/es990120a\r\n","relation_type":["Methods"],"relation_desc":""},{"id":"904814","citation":"Tercier-Waeber, M.-L., & Taillefert, M. (2008). Remote in situ voltammetric techniques to characterize the biogeochemical cycling of trace metals in aquatic systems. J. Environ. Monit., 10(1), 30–54. https://doi.org/10.1039/b714439n\r\n","relation_type":["Methods"],"relation_desc":""},{"id":"904816","citation":"Theberge, S. M., & Luther III, G. W. (1997). Aquatic Geochemistry, 3(3), 191–211. https://doi.org/10.1023/a:1009648026806\r\n","relation_type":["Methods"],"relation_desc":""}],"related_datasets":[{"_id":"904417","name":"Northern Gulf of Mexico pore geochemical data","url":"","relation_type":"IsRelatedTo","type_desc":"

The dataset is related to another dataset.

\n","relation_desc":"The electrochemical depth profiles were obtained in separate sediment cores, yet from the same cast as the pore water dataset.","citation":"Taillefert, M. (2025) Depth profiles of pore water constituents from sediment cores collected on the Louisiana Shelf of the Northern Gulf of Mexico during 2020, 2021, and 2022 on R/V Savannah cruises SAV-20-07, SAV-21-25, SAV-21-24, SAV-22-06, and SAV-22-11. Biological and Chemical Oceanography Data Management Office (BCO-DMO). (Version 2) Version Date 2025-07-16 doi:10.26008/1912/bco-dmo.904417.2"}],"services":[{"grouping":"","items":[{"name":"View Data","description":"An in-browser view of the primary tabular data file","url":"https://www.bco-dmo.org/dataset/904782/data/view","contentType":"text/html","actionType":"view"}]},{"grouping":"ERDDAP","items":[{"name":"SUBSET DATA","description":"","url":"https://erddap.bco-dmo.org/erddap/tabledap/bcodmo_dataset_904782_v1.html","contentType":"text/html","actionType":"tool"},{"name":"VIEW TABLE","description":"","url":"https://erddap.bco-dmo.org/erddap/tabledap/bcodmo_dataset_904782_v1.htmlTable","contentType":"text/html","actionType":"view"},{"name":"CSV","description":"","url":"https://erddap.bco-dmo.org/erddap/tabledap/bcodmo_dataset_904782_v1.csv","contentType":"text/csv","actionType":"download"},{"name":"TSV","description":"","url":"https://erddap.bco-dmo.org/erddap/tabledap/bcodmo_dataset_904782_v1.tsv","contentType":"text/tsv","actionType":"download"},{"name":"MATLAB","description":"","url":"https://erddap.bco-dmo.org/erddap/tabledap/bcodmo_dataset_904782_v1.mat","contentType":"text/x-matlab","actionType":"download"},{"name":"netCDF","description":"","url":"https://erddap.bco-dmo.org/erddap/tabledap/bcodmo_dataset_904782_v1.nc","contentType":"application/x-netcdf","actionType":"download"}]},{"grouping":"Metadata","items":[{"name":"HTML","description":"A simple HTML page of the dataset metadata","url":"https://www.bco-dmo.org/dataset/904782/description","contentType":"text/html","actionType":"view"},{"name":"PDF","description":"A PDF of the HTML dataset metadata","url":"https://www.bco-dmo.org/dataset/904782/Dataset_description.pdf","contentType":"application/pdf","actionType":"download"},{"name":"ISO 19115-2 (NOAA Profile)","description":"","url":"https://www.bco-dmo.org/dataset/904782/iso","contentType":"application/xml","actionType":"download"}]}],"programs":[],"projects":[{"_id":"894879","name":"Importance of Riverine Discharge on the Benthic Flux of Alkalinity to Continental Margins","acronym":"NGoM Benthic Alk Flux","description":"$1c"}],"archives":[{"id_value":"10.26008/1912/bco-dmo.904782.1","url":"https://doi.org/10.26008/1912/bco-dmo.904782.1","date_assigned":"2024-07-02","version_date":"2023-07-20","archiver":"Marine Biological Laboratory/Woods Hole Oceanographic Institution Library (MBLWHOI DLA)","archiver_id":"272"}],"license":{"name":"Creative Commons Attribution 4.0","id":"CC-BY-4.0","uri":"https://creativecommons.org/licenses/by/4.0/","spdxUri":"https://spdx.org/licenses/CC-BY-4.0"},"metrics":{"views":{"count":187},"downloads":{"count":310}}}}]