http://lod.bco-dmo.org/id/dataset/947637
eng; USA
utf8
dataset
Highest level of data collection, from a common set of sensors or instrumentation, usually within the same research project
Biological and Chemical Oceanography Data Management Office (BCO-DMO)
Unavailable
508-289-2009
WHOI MS#36
Woods Hole
MA
02543
USA
info@bco-dmo.org
http://www.bco-dmo.org
Monday - Friday 8:00am - 5:00pm
For questions regarding this resource, please contact BCO-DMO via the email address provided.
pointOfContact
2024-12-30
ISO 19115-2 Geographic Information - Metadata - Part 2: Extensions for Imagery and Gridded Data
ISO 19115-2:2009(E)
Dissolved trace metal and macronutrient concentration data from incubation experiments conducted during the May 2021 EXPORTS North Atlantic cruise (DY131)
2024-12-30
publication
2024-12-30
revision
Marine Biological Laboratory/Woods Hole Oceanographic Institution Library (MBLWHOI DLA)
2025-01-14
publication
https://doi.org/10.26008/1912/bco-dmo.947637.1
Kristen Nicolle Buck
Oregon State University
principalInvestigator
Mark A. Brzezinski
University of California-Santa Barbara
principalInvestigator
Bethany D. Jenkins
University of Rhode Island
principalInvestigator
Salvatore Caprara
Oregon State University
principalInvestigator
Biological and Chemical Oceanography Data Management Office (BCO-DMO)
Unavailable
508-289-2009
WHOI MS#36
Woods Hole
MA
02543
USA
info@bco-dmo.org
http://www.bco-dmo.org
Monday - Friday 8:00am - 5:00pm
For questions regarding this resource, please contact BCO-DMO via the email address provided.
publisher
Cite this dataset as: Buck, K. N., Navarro-Estrada, D., Caprara, S., Brzezinski, M. A., Jenkins, B. D. (2025) Dissolved trace metal and macronutrient concentration data from incubation experiments conducted during the May 2021 EXPORTS North Atlantic cruise (DY131). Biological and Chemical Oceanography Data Management Office (BCO-DMO). (Version 1) Version Date 2024-12-30 [if applicable, indicate subset used]. doi:10.26008/1912/bco-dmo.947637.1 [access date]
Methods and Sampling: <p><strong>Incubation set-up</strong></p>
<p>This work was funded by NSF and conducted in collaboration with the NASA EXPORTS campaign at PAP-SO, which sampled the decline of the North Atlantic Spring Bloom (NASB) in May 2021 on board the RRS Discovery (Cruise ID: DY131). All sampling occurred within a retentive eddy named “A2”, with a deep anticyclonic structure. Three types of shipboard incubation experiments were conducted using trace metal clean techniques: Long-Term (LT), Short-Term (ST), and Grow-Out (GO) incubation experiments, for a total of eight incubations.&nbsp;</p>
<p>&nbsp;</p>
<p><strong>Long-Term experiments</strong></p>
<p>Surface water for LT experiments was collected using a trace metal clean towfish (Mellett and Buck 2020) while transiting at a speed of ~6 knots. Four treatments were used for the LT experiments: control (no additions), AllbutSi (+5 nM&nbsp;<sup>57</sup>FeCl<sub>3</sub>, 20 µM nitrate, 1.25 µM phosphate), AllbutFe (+20 µM silicic acid, 20 µM nitrate, 1.25 µM phosphate), and AllbutN (+5 nM&nbsp;<sup>57</sup>FeCl<sub>3</sub>, 20 µM silicic acid, 1.25 µM phosphate). All Fe additions were made with an enriched standard of&nbsp;<sup>57</sup>FeCl<sub>3</sub>&nbsp;(ISOFLEX) to serve as a tracer of the added Fe. The nitrate and phosphate stocks were chelexed prior to use to remove metal contaminants. The silicic acid stock was made in an acid-cleaned Teflon bottle that was changed periodically to lower dissolved Fe concentrations and minimize metal contamination from this nutrient addition.&nbsp;</p>
<p>Triplicate 20 L polycarbonate (PC) carboys were used for each treatment. The carboys were filled in three rounds, with the first set of replicate carboys filled first, followed by the subsequent replicates. To facilitate homogenization, the carboys for each replicate round were filled in three passes, with each pass filling them to one-third of their final volume until full to the brim. For each treatment except the control, a 1 L PC bottle was also filled through the same sequence. Once filled, carboys and 1 L bottles were spiked with the treatments outlined above; a second 1 L PC bottle was filled from the treated carboys as a second check on the treatments. The 1 L bottles were sampled for post-spike time-zeroes of the incubation treatments and were identified as “T0.1”; these bottles were uniquely spiked with 10 nM&nbsp;<sup>57</sup>FeCl<sub>3</sub>. The 1 L bottles sampled from the already treated carboys are identified as “T0.2” and had Fe additions of 5 nM&nbsp;<sup>57</sup>FeCl<sub>3</sub>. Both sets of 1 L bottles were sacrificed in full for the time-zero samples. The LT 2 experiments were set up on the same day as the short-term experiment 2 (ST 2), and the time-zero Control treatments were sampled from one set of incubation bottles to represent both experiments. The treated carboys were placed in seawater-flowthrough deckboard incubators, covered with a mesh to allow 40% of surface photosynthetically active radiation (PAR) exposure, and harvested for final timepoint sampling after 6 (LT 1) or 5 (LT 2) days.&nbsp;</p>
<p>&nbsp;</p>
<p><strong>Short-Term experiments</strong></p>
<p>Three short-term experiments were conducted: ST 1A, ST 1B, and ST 2. Surface seawater was collected for the ST experiments following the same approach outlined above for the Long-Term experiments: 20 L PC carboys were filled with the TMC Towfish in three rounds corresponding to each set of replicates, and in each round, the set of carboys were filled to one-third of the volume, consecutively until full to the brim. Each ST experiment had a different set of treatments: ST 1A included Control (no addition), +Fe (+ 5 nM&nbsp;<sup>57</sup>FeCl<sub>3</sub>); ST 1B included Control (no addition), +Si (+20 µM silicic acid); ST 2 included Control (no addition), +N (+20 µM nitrate). T0.1 and T0.2 1 L bottles were collected the same way as described above for the LT experiments: the T0.1 bottles filled from the towfish and then spiked with 10 nM&nbsp;<sup>57</sup>FeCl<sub>3</sub>, and the T0.2 bottles filled from subsampling the post-spike carboys that had already been spiked with 5 nM&nbsp;<sup>57</sup>FeCl<sub>3</sub>. The same stock standards of&nbsp;<sup>57</sup>FeCl<sub>3</sub>, silicic acid, and nitrate were used for these experiments as for the LT experiments. The ST 2 and LT 2 experiments were set up on the same day, and the time-zero Control treatments were sampled from one set of incubation bottles to represent both experiments. The treated carboys were placed in seawater-flowthrough deckboard incubators, covered with a mesh to allow 40% of surface photosynthetically active radiation (PAR) exposure, and harvested for final timepoint sampling after 22 hours for ST 1A, 40 hours for ST 1B, and 25 hours for ST 2.</p>
<p>&nbsp;</p>
<p><strong>Grow-Out experiments</strong></p>
<p>Subsurface seawater for the grow-out (GO) experiments was collected with modified x-Niskin bottles (12L Ocean Test Equipment, Inc.) on a trace metal clean rosette (Cutter et al. 2017). Casts to collect the seawater were conducted between 11 am and 12 pm local time on the ship. Seawater was collected&nbsp;at depths of 47% and 12% of the surface photosynthetically active radiation (PAR), for a “High Light” and “Low Light” treatment, respectively. Seawater from the x-Niskins was transferred to 1 L PC incubation bottles that had been acid cleaned, Milli-Q conditioned, and rinsed three times with seawater before filling&nbsp;(Hollister et al., 2020; Burns et al., 2023). Three treatments were conducted for each light level: Control (no addition); +Fe (+5 nM&nbsp;<sup>57</sup>FeCl<sub>3</sub>); +Fe+Si (+5 nM&nbsp;<sup>57</sup>FeCl<sub>3</sub>, 20 µM silicic acid); for GO 3, the Fe addition was +0.5 nM&nbsp;<sup>57</sup>FeCl<sub>3</sub>. The same stock standards of&nbsp;<sup>57</sup>FeCl<sub>3</sub>&nbsp;and silicic acid were used for these experiments as for the LT and ST experiments. A replicate incubation bottle for all treatments was prepared in filtered (&lt;0.2 µm; Acropak) seawater and incubated wrapped in heavy duty black construction bags to allow for a dark control and an assessment of abiotic changes in trace metals including wall loss and precipitation.&nbsp;</p>
<p>The PAR intensity (47% and 12%) from the water column&nbsp;was maintained for the incubations by placing the 1-L incubation bottles in custom mesh screen bags designed to achieve the target light levels.&nbsp;All incubation bottles in their respective light treatment bags were placed in the seawater-flowthrough deckboard incubators, and harvested after 67 hours for GO experiment 1, 45 hours for GO experiment 2, and 70 hours for GO experiment 3.</p>
<p>&nbsp;</p>
<p><strong>Incubation sampling</strong></p>
<p>All sampling occurred in a positive pressure hood of HEPA filtered air inside a trace metal clean van built into the RRS Discovery. Incubation sampling occurred at two timepoints: time-zero and time-final. For the LT and ST experiments, the T0.1 and T0.2 1 L bottles constituted the time-zeroes of the incubation treatments with additions. For time-final timepoints, the LT and ST experiments were subsampled from the 20 L PC carboys into 1 L PC bottles after carefully mixing. No sub-sampling was required for the GO experiments, which were conducted in 1 L PC bottles. In all cases, the incubation samples were filtered by vacuum using custom filtration rigs with Teflon dual-stage filter holders (Savillex ®) through two consecutive, acid cleaned polycarbonate track etched (PCTE) filters of 5 µm and 0.4 µm&nbsp;(Burns et al., 2023). The &lt;0.4 µm filtrate was collected for dissolved trace metals in acid-cleaned 125 mL low-density polyethylene (LDPE) bottles, and dissolved macronutrients in acid-cleaned 15 mL polypropylene tubes (Falcon). Dissolved trace metal samples were then acidified to 0.024 M with Optima HCl (pH~ 1.8;&nbsp;(Johnson et al., 2007)) and stored at room temperature until returned to the Buck lab at the University of South Florida for analyses. Dissolved macronutrient samples were stored frozen at -20 °C until returned to the Buck lab at the University of South Florida for analyses.</p>
<p>&nbsp;</p>
<p><strong>Analysis of dissolved trace metals</strong></p>
<p>Sample analysis for dissolved trace metals was conducted at the University of South Florida (USF) College of Marine Science (CMS), and Florida State University (FSU) National High Magnetic Field Laboratory (MagLab). To prepare for analysis, dissolved trace metal samples were transferred to 30 or 15 mL perfluoroalkoxy (PFA) vials with caps containing a quartz-window to enable UV-oxidization. Samples were UV-oxidized at USF for 90 minutes at ~20 mW cm<sup>-2&nbsp;</sup>with an UVO-Cleaner (Jelight; Model No. 5144AX)&nbsp;to liberate organically complexed dissolved Co and Cu (Milne et al. 2010). For cobalt, nickel, and copper, the UV-oxidized and non-UV-oxidized sample results are presented separately.</p>
<p>The automated seaFAST-pico (Elemental Scientific) with a Nobias Chelate-PA1 resin was connected to a High Resolution-Inductively Coupled Plasma-Mass Spectrometer (HR-ICP-MS; Thermo Scientific Element 2 at FSU, Element XR at USF), to preconcentrate and extract trace metals from the seawater samples inline (Lagerström et al. 2013). The reagents and input flow rates for seaFAST were followed from Hollister et al. (2020) and Burns et al. (2023). The elution acid in this study was a solution of 10% HNO<sub>3&nbsp;</sub>(Optima) with 1 ppb Indium as the internal standard. Upon loading the buffered sample (pH ~ 6.2 ± 0.2;&nbsp;Burns et al., 2023)&nbsp;in the resin column, the column was rinsed with Milli-Q (≥18.2 MΩ·cm) to wash out seawater salts, and the chelated trace metals were eluted with the elution acid containing the internal standard. The eluent from seaFAST was then drawn by the ICP-MS and analyzed for the natural abundance of Mn, Fe, Co, Ni, Cu, Zn, Cd, and Pb. Samples were analyzed twice, on the Element 2 at FSU, and on the Element XR at USF.</p>
<p>All analytical runs were comprised of seawater samples, instrument-manifold air blanks, quality control (QC) samples, a matrix-matched multielement calibration curve containing all target metals, matrix-matched molybdenum (Mo), two Fe57 calibration curves, including an Fe57 calibration curve made in 5% HNO<sub>3</sub>&nbsp;(Optima) and a matrix-matched Fe57 curve, and certified reference materials, including SAFe D2, GEOTRACES GSP, and NASS-7. All seawater calibration curves and reference samples were prepared and treated the same as the seawater samples throughout the analytical runs.&nbsp;</p>
<p>The in-house QC consisted of 2-L aliquots of filtered (&lt;0.2 µm) PAP-SO surface seawater (49.20469 °N, -14.78163 °E) that was collected in bulk on the 2021 EXPORTS cruise and then subsampled and acidified to 0.024 M HCl (Optima) for each QC aliquot. The matrix-matched curves, including the multielement, Mo, and Fe57 calibration curves were made using the same seawater as the QC to match the matrix of the seawater samples. The matrix-matched multielement calibration curve was made by dilution from a set of working stocks containing the target metals. These working stocks were diluted from ICP primary standards of 1000 µg/mL in 2% HNO<sub>3</sub>&nbsp;of Mn (SPEX CertiPrep), Fe, Co, Ni, Cu, Cd (ULTRA Scientific), Zn and Pb (RICCA) diluted with 5% HNO<sub>3&nbsp;</sub>(Optima, Fisher) elution acid matrix. The Mo ICP primary standard consisted of 1000 µg/mL Mo in H<sub>2</sub>O (SPEX CertiPrep), from which a Mo working stock was made by dilution with 5% HNO<sub>3</sub>&nbsp;(Optima, Fisher). The Fe57 primary standard consisted of Fe57 oxide enriched to 96.64% (ISOFLEX), which was dissolved in HCl to make a concentrated stock of&nbsp;<sup>57</sup>FeCl<sub>3</sub>. For this work, two working stocks of 186 µM and 10 µM&nbsp;<sup>57</sup>FeCl<sub>3</sub>&nbsp;were used to achieve Fe additions in 22 L and 1 L incubation bottles. Calibration curves for Fe57 were made with by dilution of the 10 µM working stock in acid-cleaned, 125 mL LDPE bottles.</p>
<p>The analytical runs usually began by conditioning the inline seaFAST-ICP-MS with a few samples of filtered seawater, followed by several air and MQ blanks, calibration curves including the multielement, Mo, and Fe57 curves, certified reference materials (also included in the middle of each analytical run to allow replicate measurements), seawater samples, several QC samples spread throughout the analytical run (every ~15th sample), several additional air blanks, and finalized by air blank samples. Sample trace metal concentrations were determined from calibration curves of the intensity counts against standards of known concentrations and corrected for average air blanks in the sequence as described previously by Hollister et al. (2020) and Burns et al. (2023).&nbsp;</p>
<p>&nbsp;</p>
<p><strong>Analysis of dissolved macronutrients</strong></p>
<p>Macronutrient samples were thawed at room temperature and analyzed following standard colorimetric methods (Parsons et al. 1984; Becker et al. 2020) using a QuAAtro39 AutoAnalyzer (SEAL Analytical) at USF. The analytical runs included seawater samples, calibration curves made in artificial seawater, reagent blanks consisting of the artificial seawater used to make the calibration curves, reference materials including CK, CL, and CO (KANSO TECHNOS), and QC samples, including standards with known concentrations of nitrite and nitrate to check the efficiency of the instrument’s cadmium column, and the lowest and middle-high standards of the calibration curve to check and correct for drift. QC samples were added approximately every 12th sample to assess the quality of the analytical run. Values below these limits of detection are reported as 0 µM with accompanying QC Flag 6. Sample analyses for macronutrients were performed by senior researcher Salvatore Caprara in the Buck lab at the University of South Florida.</p>
Funding provided by NSF Division of Ocean Sciences (NSF OCE) Award Number: OCE-1756816 Award URL: https://www.nsf.gov/awardsearch/show-award?AWD_ID=1756816
Funding provided by NSF Division of Ocean Sciences (NSF OCE) Award Number: OCE-1756433 Award URL: https://www.nsf.gov/awardsearch/show-award?AWD_ID=1756433
Funding provided by NSF Division of Ocean Sciences (NSF OCE) Award Number: OCE-1756442 Award URL: https://www.nsf.gov/awardsearch/show-award?AWD_ID=1756442
Funding provided by NSF Division of Ocean Sciences (NSF OCE) Award Number: OCE-2424207 Award URL: https://www.nsf.gov/awardsearch/show-award?AWD_ID=2424207
completed
Kristen Nicolle Buck
Oregon State University
541-737-7401
2651 SW Orchard Avenue CEOAS
Corvallis
OR
97331
USA
kristen.buck@oregonstate.edu
pointOfContact
Mark A. Brzezinski
University of California-Santa Barbara
805-893-7061
UCSB Marine Science Institute Bldg 520 Rm 4002 Fl 4L
Santa Barbara
CA
93106
USA
mark.brzezinski@lifesci.ucsb.edu
pointOfContact
Bethany D. Jenkins
University of Rhode Island
401-874-7551
Department of Cell and Molecular Biology and Graduate School of Oceanography 279 CBLS, 120 Flagg Road
Kingston
RI
02881
USA
bdjenkins@uri.edu
pointOfContact
Salvatore Caprara
Oregon State University
capraras@oregonstate.edu
pointOfContact
asNeeded
Dataset Version: 1
Unknown
CRUISE_ID
EVTNBR
DATE_UTC
JULIAN_DAY
EPOCH
EPOCH_DAY
LATITUDE
LONGITUDE
PLATFORM
DEPTH
INCLIGHT
INCVOL
INCNBR
INCDAY
INCTREATMENT
INCTREATMENT_ID
NO3_NO2_CONC_INC
NO3_NO2_STDEV
NO3_NO2_FLAG
PO4_CONC_INC
PO4_STDEV
PO4_FLAG
SiO4_CONC_INC
SiO4_STDEV
SiO4_FLAG
NO2_CONC_INC
NO2_STDEV
NO2_FLAG
Mn_D_CONC_INC
Mn_D_STDEV
Mn_D_FLAG
Fe_D_CONC_INC
Fe_D_STDEV
Fe_D_FLAG
BKGDFe_D_CONC_INC
BKGDFe_D_STDEV
BKGDFe_D_FLAG
ADD_57Fe_D_CONC_INC
ADD_57Fe_D_STDEV
ADD_57Fe_D_FLAG
Co_D_UV_CONC_INC
Co_D_UV_STDEV
Co_D_UV_FLAG
Co_D_noUV_CONC_INC
Co_D_noUV_STDEV
Co_D_noUV_FLAG
Ni_D_UV_CONC_INC
Ni_D_UV_STDEV
Ni_D_UV_FLAG
Ni_D_noUV_CONC_INC
Ni_D_noUV_STDEV
Ni_D_noUV_FLAG
Cu_D_UV_CONC_INC
Cu_D_UV_STDEV
Cu_D_UV_FLAG
Cu_D_noUV_CONC_INC
Cu_D_noUV_STDEV
Cu_D_noUV_FLAG
Zn_D_CONC_INC
Zn_D_STDEV
Zn_D_FLAG
Cd_D_CONC_INC
Cd_D_STDEV
Cd_D_FLAG
Pb_D_CONC_INC
Pb_D_STDEV
Pb_D_FLAG
Seabird SBE 32
ThermoScientific Element II
Inductively Couple Plasma Mass Spectrometer (ThermoScientific Element XR)
QuAAtro39 AutoAnalyzer (SEAL Analytical)
Elemental Scientific seaFAST-pico System
Trace Metal Clean Towfish
theme
None, User defined
cruise id
event
date
Julian day as a decimal (time elapsed in days from 00:00 on January 1st 4713 BC)
sample time
latitude
longitude
sample description
depth
irradiance level set for incubation experiments
sample_volume
experiment id
incubation time or duration
treatment
nitrate plus nitrite
quality flag
reactive phosphorus (PO4)
Silicate (reactive silica)
Nitrite
Manganese
Iron
Cobalt
trace metal concentration
Copper
Zinc
Cadmium
Lead
featureType
BCO-DMO Standard Parameters
Discrete water sampler
Inductively Coupled Plasma Mass Spectrometer
Inductively Coupled Plasma Mass Spectrometer
Nutrient Autoanalyzer
SeaFAST Automated Preconcentration System
towed unmanned submersible
instrument
BCO-DMO Standard Instruments
DY131
service
Deployment Activity
Celtic Sea
place
Locations
otherRestrictions
otherRestrictions
Access Constraints: none. Use Constraints: Please follow guidelines at: http://www.bco-dmo.org/terms-use Distribution liability: Under no circumstances shall BCO-DMO be liable for any direct, incidental, special, consequential, indirect, or punitive damages that result from the use of, or the inability to use, the materials in this data submission. If you are dissatisfied with any materials in this data submission your sole and exclusive remedy is to discontinue use.
EXport Processes in the Ocean from Remote Sensing
http://oceanexports.org/
EXport Processes in the Ocean from Remote Sensing
EXport Processes in the Ocean from Remote Sensing (EXPORTS) is a large-scale NASA-led field campaign that will provide critical information for quantifying the export and fate of upper ocean net primary production (NPP) using satellite observations and state of the art ocean technologies.
Ocean ecosystems play a critical role in the Earth’s carbon cycle and the quantification of their impacts for both present conditions and for predictions into the future remains one of the greatest challenges in oceanography. The goal of the EXport Processes in the Ocean from Remote Sensing (EXPORTS) Science Plan is to develop a predictive understanding of the export and fate of global ocean net primary production (NPP) and its implications for present and future climates. The achievement of this goal requires a quantification of the mechanisms that control the export of carbon from the euphotic zone as well as its fate in the underlying "twilight zone" where some fraction of exported carbon will be sequestered in the ocean’s interior on time scales of months to millennia. In particular, EXPORTS will advance satellite diagnostic and numerical prognostic models by comparing relationships among the ecological, biogeochemical and physical oceanographic processes that control carbon cycling across a range of ecosystem and carbon cycling states. EXPORTS will achieve this through a combination of ship and robotic field sampling, satellite remote sensing and numerical modeling. Through a coordinated, process-oriented approach, EXPORTS will foster new insights on ocean carbon cycling that maximizes its societal relevance through the achievement of U.S. and International research agency goals and will be a key step towards our understanding of the Earth as an integrated system.
EXPORTS
largerWorkCitation
program
Collaborative Research: Diatoms, Food Webs and Carbon Export - Leveraging NASA EXPORTS to Test the Role of Diatom Physiology in the Biological Carbon Pump
https://osprey.bco-dmo.org/project/757387
Collaborative Research: Diatoms, Food Webs and Carbon Export - Leveraging NASA EXPORTS to Test the Role of Diatom Physiology in the Biological Carbon Pump
<p><em>NSF Award Abstract:</em><br />
This project focuses on a group of microscopic single-celled photosynthetic organisms in the ocean called diatoms. Diatoms float in the surface ocean as part of a group of organisms collectively called phytoplankton. There are thousands of different species of diatoms distributed across the global ocean. A famous oceanographer Henry Bigelow once said "All fish is diatoms" reflecting the importance of diatoms as the base of the food chain that supports the world's largest fisheries. Despite their small size, diatom photosynthesis produces 20% of the oxygen on earth each year. That's more than all of the tropical rain forests on land. The major objective of the research is to understand how the metabolic differences among diatom species affects the amount of diatom organic carbon that is carried, or exported, from the surface ocean to the deep ocean. As diatoms are photo-synthesizers like green plants, their biological carbon comes from converting carbon dioxide dissolved in seawater from the atmosphere into organic forms. Diatoms also require a series of other nurtrients supplied by the ocean such as nitrogen and phosphorous and, uniquely for diatoms, the silicon used to construct their glass shells. This research will investigate how genetic and physiological differences among diatoms influence how each species react to changes in nutrient levels in the ocean and how those shifts affect the export of diatom carbon to the deep sea. The link between diatoms' physiological response and their carbon export comes about because shifts in physiology affect diatom attributes like how fast they sink and how tasty they are to predators. So if we can relate the physiological condition of different diatoms to the food-web pathways followed by different species, we can ultimately use knowledge of diatom physiological status and food web structure to predict how much diatom carbon gets to the deep sea. The research involves investigators with expertise in the physiology and genomics of diatoms and in the ocean's chemistry. The work will initially take place in the subarctic North Pacific in conjunction with the NASA Export Processes in the Ocean from RemoTe Sensing (EXPORTS) field program. The EXPORTS program is using a wide variety of methods to quantify the export and fate of photo-synthetically fixed carbon in the upper ocean. The research supports the training of undergraduate students, graduate students and a postdoctoral scholar. The research will also serve as the basis for activities aimed at K-12 and junior high school students.</p>
<p>The research will broadly impact our understanding of the biology of the biological pump (the transport of photo-synthetically fixed organic carbon to the deep sea) by forming a mechanistic basis for predicting the export of diatom carbon. It is hypothesized that the type and degree of diatom physiological stress are vital aspects of ecosystem state that drive export. To test this hypothesis, the genetic composition, rates of nutrient use and growth response of diatom communities will be evaluated and supported with measurements of silicon and iron stress to evaluate stress as a predictor of the path of diatom carbon export. The subarctic N. Pacific ecosystem is characterized as high nutrient low chlorophyll (HNLC) due to low iron (Fe) levels that are primary controllers constraining phytoplankton utilization of other nutrients. It has been a paradigm in low Fe, HNLC systems that diatoms grow at elevated Si:C and Si:N ratios and should be efficiently exported as particles significantly enriched in Si relative to C. However, Fe limitation also alters diatoms species composition and the high Si demand imposed by low Fe can drive HNLC regions to Si limitation or Si/Fe co-limitation. Thus, the degree of Si and/or Fe stress in HNLC waters can all alter diatom taxonomic composition, the elemental composition of diatom cells, and the path cells follow through the food web ultimately altering diatom carbon export.</p>
<p>This award reflects NSF's statutory mission and has been deemed worthy of support through evaluation using the Foundation's intellectual merit and broader impacts review criteria.</p>
Diatoms and carbon export
largerWorkCitation
project
eng; USA
oceans
Celtic Sea
-14.998
-14.7826
48.8309
49.0793
2021-05-01
2021-06-01
Sub-Arctic Pacific, Ocean Station Papa
0
BCO-DMO catalogue of parameters from Dissolved trace metal and macronutrient concentration data from incubation experiments conducted during the May 2021 EXPORTS North Atlantic cruise (DY131)
Biological and Chemical Oceanography Data Management Office (BCO-DMO)
Unavailable
508-289-2009
WHOI MS#36
Woods Hole
MA
02543
USA
info@bco-dmo.org
http://www.bco-dmo.org
Monday - Friday 8:00am - 5:00pm
For questions regarding this resource, please contact BCO-DMO via the email address provided.
pointOfContact
http://lod.bco-dmo.org/id/dataset-parameter/947684.rdf
Name: CRUISE_ID
Units: unitless
Description: <p>Cruise identifier.</p>
http://lod.bco-dmo.org/id/dataset-parameter/947685.rdf
Name: EVTNBR
Units: unitless
Description: <p>Event number for incubation setup water collection events, from ship log.</p>
http://lod.bco-dmo.org/id/dataset-parameter/947686.rdf
Name: DATE_UTC
Units: unitless
Description: <p>Date in UTC time when sample was collected, in format MM/DD/YY; ship time was set at UTC throughout cruise.</p>
http://lod.bco-dmo.org/id/dataset-parameter/947687.rdf
Name: JULIAN_DAY
Units: unitless
Description: <p>Julian Day when sample was collected.</p>
http://lod.bco-dmo.org/id/dataset-parameter/947688.rdf
Name: EPOCH
Units: unitless
Description: <p>Defined time block during the cruise, #1-3.</p>
http://lod.bco-dmo.org/id/dataset-parameter/947689.rdf
Name: EPOCH_DAY
Units: unitless
Description: <p>Day within the epoch time block.</p>
http://lod.bco-dmo.org/id/dataset-parameter/947690.rdf
Name: LATITUDE
Units: decimal degrees
Description: <p>Ship position when incubation setup water was collected in decimal °N.</p>
http://lod.bco-dmo.org/id/dataset-parameter/947691.rdf
Name: LONGITUDE
Units: decimal degrees
Description: <p>Ship position when incubation setup water was collected in decimal °E.</p>
http://lod.bco-dmo.org/id/dataset-parameter/947692.rdf
Name: PLATFORM
Units: unitless
Description: <p>Sampling system used for incubation setup water collection; TMC CTD = trace metal clean CTD rosette, FISH = towfish.</p>
http://lod.bco-dmo.org/id/dataset-parameter/947693.rdf
Name: DEPTH
Units: meters (m)
Description: <p>Depth in meters of incubation setup water collection.</p>
http://lod.bco-dmo.org/id/dataset-parameter/947694.rdf
Name: INCLIGHT
Units: percentage of reference intensity (% I0)
Description: <p>Target light level of incubation treatment. </p>
http://lod.bco-dmo.org/id/dataset-parameter/947695.rdf
Name: INCVOL
Units: liters (L)
Description: <p>Volume of incubation bottles used in each experiment.</p>
http://lod.bco-dmo.org/id/dataset-parameter/947696.rdf
Name: INCNBR
Units: unitless
Description: <p>Unique identification number assigned to each incubation experiment (see Table 1; methods).</p>
http://lod.bco-dmo.org/id/dataset-parameter/947697.rdf
Name: INCDAY
Units: unitless
Description: <p>Day of incubation experiment when sample was collected.</p>
http://lod.bco-dmo.org/id/dataset-parameter/947698.rdf
Name: INCTREATMENT
Units: unitless
Description: <p>Treatment identification within each incubation (see Table 1).</p>
http://lod.bco-dmo.org/id/dataset-parameter/947699.rdf
Name: INCTREATMENT_ID
Units: unitless
Description: <p>Identification number assigned to treatment samples within each incubation experiment.</p>
http://lod.bco-dmo.org/id/dataset-parameter/947700.rdf
Name: NO3_NO2_CONC_INC
Units: micromoles per liter (um/L)
Description: <p>Concentrations of dissolved nitrate+nitrite in incubation samples. 'na' for 'not applicable' is used when no sample was collected for this parameter.</p>
http://lod.bco-dmo.org/id/dataset-parameter/947701.rdf
Name: NO3_NO2_STDEV
Units: micromoles per liter (um/L)
Description: <p>Concentrations of dissolved nitrate+nitrite in incubation samples. ‘na’ for ‘not applicable’ used when no sample was collected for this parameter. </p>
http://lod.bco-dmo.org/id/dataset-parameter/947702.rdf
Name: NO3_NO2_FLAG
Units: unitless
Description: <p>Quality flag for NO3_NO2.</p>
http://lod.bco-dmo.org/id/dataset-parameter/947703.rdf
Name: PO4_CONC_INC
Units: micromoles per liter (um/L)
Description: <p>Concentrations of dissolved phosphate in incubation samples. ‘na’ for ‘not applicable’ used when no sample was collected for this parameter.</p>
http://lod.bco-dmo.org/id/dataset-parameter/947704.rdf
Name: PO4_STDEV
Units: micromoles per liter (um/L)
Description: <p>Standard deviation of replicate phosphate concentration measurements. If only 2 replicates, the difference about the mean was used to calculate error.</p>
http://lod.bco-dmo.org/id/dataset-parameter/947705.rdf
Name: PO4_FLAG
Units: unitless
Description: <p>Quality flag for PO4.</p>
http://lod.bco-dmo.org/id/dataset-parameter/947706.rdf
Name: SiO4_CONC_INC
Units: micromoles per liter (um/L)
Description: <p>Concentrations of dissolved silicic acid in incubation samples. ‘na’ for ‘not applicable’ used when no sample was collected for this parameter.</p>
http://lod.bco-dmo.org/id/dataset-parameter/947707.rdf
Name: SiO4_STDEV
Units: micromoles per liter (um/L)
Description: <p>Standard deviation of replicate silicate concentration measurements. If only 2 replicates, the difference about the mean was used to calculate error.</p>
http://lod.bco-dmo.org/id/dataset-parameter/947708.rdf
Name: SiO4_FLAG
Units: unitless
Description: <p>Quality flag for SiO4.</p>
http://lod.bco-dmo.org/id/dataset-parameter/947709.rdf
Name: NO2_CONC_INC
Units: micromoles per liter (um/L)
Description: <p>Concentrations of dissolved nitrite in incubation samples. ‘na’ for ‘not applicable’ used when no sample was collected for this parameter.</p>
http://lod.bco-dmo.org/id/dataset-parameter/947710.rdf
Name: NO2_STDEV
Units: micromoles per liter (um/L)
Description: <p>Standard deviation of replicate nitrate+nitrite concentration measurements. If only 2 replicates, the difference about the mean was used to calculate error.</p>
http://lod.bco-dmo.org/id/dataset-parameter/947711.rdf
Name: NO2_FLAG
Units: unitless
Description: <p>Quality flag for NO2.</p>
http://lod.bco-dmo.org/id/dataset-parameter/947712.rdf
Name: Mn_D_CONC_INC
Units: nanomoles per liter (nmol/L)
Description: <p>Concentrations of dissolved manganese (Mn) in incubation samples.</p>
http://lod.bco-dmo.org/id/dataset-parameter/947713.rdf
Name: Mn_D_STDEV
Units: nanomoles per liter (nmol/L)
Description: <p>Standard deviation of replicate dissolved manganese (Mn) measurements. If only 2 replicates, the difference about the mean was used to calculate error.</p>
http://lod.bco-dmo.org/id/dataset-parameter/947714.rdf
Name: Mn_D_FLAG
Units: unitless
Description: <p>Quality flag for Mn_D_CONC.</p>
http://lod.bco-dmo.org/id/dataset-parameter/947715.rdf
Name: Fe_D_CONC_INC
Units: Nanomoles per liter (nmol/L)
Description: <p>Concentrations of total dissolved iron (Fe) in incubation samples. </p>
http://lod.bco-dmo.org/id/dataset-parameter/947716.rdf
Name: Fe_D_STDEV
Units: Nanomoles per liter (nmol/L)
Description: <p>Standard deviation of replicate total dissolved iron (Fe) measurements. If only 2 replicates, the difference about the mean was used to calculate error.</p>
http://lod.bco-dmo.org/id/dataset-parameter/947717.rdf
Name: Fe_D_FLAG
Units: unitless
Description: <p>Quality flag for Fe_D_CONC.</p>
http://lod.bco-dmo.org/id/dataset-parameter/947718.rdf
Name: BKGDFe_D_CONC_INC
Units: Nanomoles per liter (nmol/L)
Description: <p>Concentrations of total dissolved iron (Fe) corrected for 57Fe spike in incubation samples; represents background (BKGD) dissolved iron concentrations. ‘nda’ for ‘no data available’ used when sample was collected but no data has been obtained for this parameter.</p>
http://lod.bco-dmo.org/id/dataset-parameter/947719.rdf
Name: BKGDFe_D_STDEV
Units: Nanomoles per liter (nmol/L)
Description: <p>Standard deviation of replicate background (BKGD) dissolved iron (Fe) measurements. If only 2 replicates, the difference about the mean was used to calculate error.</p>
http://lod.bco-dmo.org/id/dataset-parameter/947720.rdf
Name: BKGDFe_D_FLAG
Units: unitless
Description: <p>Quality flag for BKGDFe_D_CONC.</p>
http://lod.bco-dmo.org/id/dataset-parameter/947721.rdf
Name: ADD_57Fe_D_CONC_INC
Units: Nanomoles per liter (nmol/L)
Description: <p>Concentrations of added dissolved iron (Fe) as 57Fe in incubation samples; represents concentration of 57Fe spike in samples. ‘na’ for ‘not applicable’ used for treatment samples where no 57Fe was added.</p>
http://lod.bco-dmo.org/id/dataset-parameter/947722.rdf
Name: ADD_57Fe_D_STDEV
Units: Nanomoles per liter (nmol/L)
Description: <p>Standard deviation of replicate background (BKGD) dissolved iron (Fe) measurements. If only 2 replicates, the difference about the mean was used to calculate error.</p>
http://lod.bco-dmo.org/id/dataset-parameter/947723.rdf
Name: ADD_57Fe_D_FLAG
Units: unitless
Description: <p>Quality flag for ADD_57Fe_D _CONC.</p>
http://lod.bco-dmo.org/id/dataset-parameter/947724.rdf
Name: Co_D_UV_CONC_INC
Units: Picomoles per liter (pmol/L)
Description: <p>Concentrations of dissolved cobalt (Co) in incubation samples, measured after UV-oxidation. ‘nda’ for ‘no data available’ used when sample was collected but no data has been obtained for this parameter.</p>
http://lod.bco-dmo.org/id/dataset-parameter/947725.rdf
Name: Co_D_UV_STDEV
Units: Picomoles per liter (pmol/L)
Description: <p>Standard deviation of replicate dissolved cobalt (Co) measurements in samples that were UV-oxidized. If only 2 replicates, the difference about the mean was used to calculate error.</p>
http://lod.bco-dmo.org/id/dataset-parameter/947726.rdf
Name: Co_D_UV_FLAG
Units: unitless
Description: <p>Quality flag for Co_D_UV_CONC.</p>
http://lod.bco-dmo.org/id/dataset-parameter/947727.rdf
Name: Co_D_noUV_CONC_INC
Units: Picomoles per liter (pmol/L)
Description: <p>Concentrations of dissolved cobalt (Co) in incubation samples; samples were not UV-oxidized prior to measurement. ‘nda’ for ‘no data available’ used when sample was collected but no data has been obtained for this parameter.</p>
http://lod.bco-dmo.org/id/dataset-parameter/947728.rdf
Name: Co_D_noUV_STDEV
Units: Picomoles per liter (pmol/L)
Description: <p>Standard deviation of replicate dissolved cobalt (Co) measurements in samples that were not UV-oxidized. If only 2 replicates, the difference about the mean was used to calculate error.</p>
http://lod.bco-dmo.org/id/dataset-parameter/947729.rdf
Name: Co_D_noUV_FLAG
Units: unitless
Description: <p>Quality flag for Co_D_noUV_CONC.</p>
http://lod.bco-dmo.org/id/dataset-parameter/947730.rdf
Name: Ni_D_UV_CONC_INC
Units: Nanomoles per liter (nmol/L)
Description: <p>Concentrations of dissolved nickel (Ni) in incubation samples, measured after UV-oxidation. ‘nda’ for ‘no data available’ used when sample was collected but no data has been obtained for this parameter.</p>
http://lod.bco-dmo.org/id/dataset-parameter/947731.rdf
Name: Ni_D_UV_STDEV
Units: Nanomoles per liter (nmol/L)
Description: <p>Standard deviation of replicate dissolved nickel (Ni) measurements in samples that were UV-oxidized. If only 2 replicates, the difference about the mean was used to calculate error.</p>
http://lod.bco-dmo.org/id/dataset-parameter/947732.rdf
Name: Ni_D_UV_FLAG
Units: unitless
Description: <p>Quality flag for Ni_D_UV_CONC.</p>
http://lod.bco-dmo.org/id/dataset-parameter/947733.rdf
Name: Ni_D_noUV_CONC_INC
Units: Nanomoles per liter (nmol/L)
Description: <p>Concentrations of dissolved nickel (Ni) in incubation samples; samples were not UV-oxidized prior to measurement. </p>
http://lod.bco-dmo.org/id/dataset-parameter/947734.rdf
Name: Ni_D_noUV_STDEV
Units: Nanomoles per liter (nmol/L)
Description: <p>Standard deviation of replicate dissolved nickel (Ni) measurements in samples that were not UV-oxidized. If only 2 replicates, the difference about the mean was used to calculate error.</p>
http://lod.bco-dmo.org/id/dataset-parameter/947735.rdf
Name: Ni_D_noUV_FLAG
Units: unitless
Description: <p>Quality flag for Ni_D_noUV_CONC.</p>
http://lod.bco-dmo.org/id/dataset-parameter/947736.rdf
Name: Cu_D_UV_CONC_INC
Units: Nanomoles per liter (nmol/L)
Description: <p>Concentrations of dissolved copper (Cu) in incubation samples, measured after UV-oxidation. </p>
http://lod.bco-dmo.org/id/dataset-parameter/947737.rdf
Name: Cu_D_UV_STDEV
Units: Nanomoles per liter (nmol/L)
Description: <p>Standard deviation of replicate dissolved copper (Cu) measurements in samples that were UV-oxidized. If only 2 replicates, the difference about the mean was used to calculate error.</p>
http://lod.bco-dmo.org/id/dataset-parameter/947738.rdf
Name: Cu_D_UV_FLAG
Units: unitless
Description: <p>Quality flag for Cu_D_UV_CONC.</p>
http://lod.bco-dmo.org/id/dataset-parameter/947739.rdf
Name: Cu_D_noUV_CONC_INC
Units: Nanomoles per liter (nmol/L)
Description: <p>Concentrations of dissolved copper (Cu) in incubation samples; samples were not UV-oxidized prior to measurement. </p>
http://lod.bco-dmo.org/id/dataset-parameter/947740.rdf
Name: Cu_D_noUV_STDEV
Units: Nanomoles per liter (nmol/L)
Description: <p>Standard deviation of replicate dissolved copper (Cu) measurements in samples that were not UV-oxidized. If only 2 replicates, the difference about the mean was used to calculate error.</p>
http://lod.bco-dmo.org/id/dataset-parameter/947741.rdf
Name: Cu_D_noUV_FLAG
Units: unitless
Description: <p>Quality flag for Cu_D_noUV_CONC.</p>
http://lod.bco-dmo.org/id/dataset-parameter/947742.rdf
Name: Zn_D_CONC_INC
Units: Nanomoles per liter (nmol/L)
Description: <p>Concentrations of dissolved zinc (Zn) in incubation samples. ‘nda’ for ‘no data available’ used when sample was collected but no data has been obtained for this parameter.</p>
http://lod.bco-dmo.org/id/dataset-parameter/947743.rdf
Name: Zn_D_STDEV
Units: Nanomoles per liter (nmol/L)
Description: <p>Standard deviation of replicate dissolved zinc (Zn) measurements. If only 2 replicates, the difference about the mean was used to calculate error.</p>
http://lod.bco-dmo.org/id/dataset-parameter/947744.rdf
Name: Zn_D_FLAG
Units: unitless
Description: <p>Quality flag for Zn_D_CONC.</p>
http://lod.bco-dmo.org/id/dataset-parameter/947745.rdf
Name: Cd_D_CONC_INC
Units: Picomoles per liter (pmol/L)
Description: <p>Concentrations of dissolved cadmium (Cd) in incubation samples. </p>
http://lod.bco-dmo.org/id/dataset-parameter/947746.rdf
Name: Cd_D_STDEV
Units: Picomoles per liter (pmol/L)
Description: <p>Standard deviation of replicate dissolved cadmium (Cd) measurements. If only 2 replicates, the difference about the mean was used to calculate error.</p>
http://lod.bco-dmo.org/id/dataset-parameter/947747.rdf
Name: Cd_D_FLAG
Units: unitless
Description: <p>Quality flag for Cd_D_CONC.</p>
http://lod.bco-dmo.org/id/dataset-parameter/947748.rdf
Name: Pb_D_CONC_INC
Units: Picomoles per liter (pmol/L)
Description: <p>Concentrations of dissolved lead (Pb) in incubation samples. </p>
http://lod.bco-dmo.org/id/dataset-parameter/947749.rdf
Name: Pb_D_STDEV
Units: Picomoles per liter (pmol/L)
Description: <p>Standard deviation of replicate dissolved lead (Pb) measurements. If only 2 replicates, the difference about the mean was used to calculate error.</p>
http://lod.bco-dmo.org/id/dataset-parameter/947750.rdf
Name: Pb_D_FLAG
Units: unitless
Description: <p>Quality flag for Pb_D_CONC.</p>
GB/NERC/BODC > British Oceanographic Data Centre, Natural Environment Research Council, United Kingdom
Biological and Chemical Oceanography Data Management Office (BCO-DMO)
Unavailable
508-289-2009
WHOI MS#36
Woods Hole
MA
02543
USA
info@bco-dmo.org
http://www.bco-dmo.org
Monday - Friday 8:00am - 5:00pm
For questions regarding this resource, please contact BCO-DMO via the email address provided.
pointOfContact
31957
https://darchive.mblwhoilibrary.org/server/api/core/bitstreams/280c0d52-f8f9-4949-942c-e5434866904c/content
download
https://doi.org/10.26008/1912/bco-dmo.947637.1
download
onLine
dataset
<p><strong>Incubation set-up</strong></p>
<p>This work was funded by NSF and conducted in collaboration with the NASA EXPORTS campaign at PAP-SO, which sampled the decline of the North Atlantic Spring Bloom (NASB) in May 2021 on board the RRS Discovery (Cruise ID: DY131). All sampling occurred within a retentive eddy named “A2”, with a deep anticyclonic structure. Three types of shipboard incubation experiments were conducted using trace metal clean techniques: Long-Term (LT), Short-Term (ST), and Grow-Out (GO) incubation experiments, for a total of eight incubations.&nbsp;</p>
<p>&nbsp;</p>
<p><strong>Long-Term experiments</strong></p>
<p>Surface water for LT experiments was collected using a trace metal clean towfish (Mellett and Buck 2020) while transiting at a speed of ~6 knots. Four treatments were used for the LT experiments: control (no additions), AllbutSi (+5 nM&nbsp;<sup>57</sup>FeCl<sub>3</sub>, 20 µM nitrate, 1.25 µM phosphate), AllbutFe (+20 µM silicic acid, 20 µM nitrate, 1.25 µM phosphate), and AllbutN (+5 nM&nbsp;<sup>57</sup>FeCl<sub>3</sub>, 20 µM silicic acid, 1.25 µM phosphate). All Fe additions were made with an enriched standard of&nbsp;<sup>57</sup>FeCl<sub>3</sub>&nbsp;(ISOFLEX) to serve as a tracer of the added Fe. The nitrate and phosphate stocks were chelexed prior to use to remove metal contaminants. The silicic acid stock was made in an acid-cleaned Teflon bottle that was changed periodically to lower dissolved Fe concentrations and minimize metal contamination from this nutrient addition.&nbsp;</p>
<p>Triplicate 20 L polycarbonate (PC) carboys were used for each treatment. The carboys were filled in three rounds, with the first set of replicate carboys filled first, followed by the subsequent replicates. To facilitate homogenization, the carboys for each replicate round were filled in three passes, with each pass filling them to one-third of their final volume until full to the brim. For each treatment except the control, a 1 L PC bottle was also filled through the same sequence. Once filled, carboys and 1 L bottles were spiked with the treatments outlined above; a second 1 L PC bottle was filled from the treated carboys as a second check on the treatments. The 1 L bottles were sampled for post-spike time-zeroes of the incubation treatments and were identified as “T0.1”; these bottles were uniquely spiked with 10 nM&nbsp;<sup>57</sup>FeCl<sub>3</sub>. The 1 L bottles sampled from the already treated carboys are identified as “T0.2” and had Fe additions of 5 nM&nbsp;<sup>57</sup>FeCl<sub>3</sub>. Both sets of 1 L bottles were sacrificed in full for the time-zero samples. The LT 2 experiments were set up on the same day as the short-term experiment 2 (ST 2), and the time-zero Control treatments were sampled from one set of incubation bottles to represent both experiments. The treated carboys were placed in seawater-flowthrough deckboard incubators, covered with a mesh to allow 40% of surface photosynthetically active radiation (PAR) exposure, and harvested for final timepoint sampling after 6 (LT 1) or 5 (LT 2) days.&nbsp;</p>
<p>&nbsp;</p>
<p><strong>Short-Term experiments</strong></p>
<p>Three short-term experiments were conducted: ST 1A, ST 1B, and ST 2. Surface seawater was collected for the ST experiments following the same approach outlined above for the Long-Term experiments: 20 L PC carboys were filled with the TMC Towfish in three rounds corresponding to each set of replicates, and in each round, the set of carboys were filled to one-third of the volume, consecutively until full to the brim. Each ST experiment had a different set of treatments: ST 1A included Control (no addition), +Fe (+ 5 nM&nbsp;<sup>57</sup>FeCl<sub>3</sub>); ST 1B included Control (no addition), +Si (+20 µM silicic acid); ST 2 included Control (no addition), +N (+20 µM nitrate). T0.1 and T0.2 1 L bottles were collected the same way as described above for the LT experiments: the T0.1 bottles filled from the towfish and then spiked with 10 nM&nbsp;<sup>57</sup>FeCl<sub>3</sub>, and the T0.2 bottles filled from subsampling the post-spike carboys that had already been spiked with 5 nM&nbsp;<sup>57</sup>FeCl<sub>3</sub>. The same stock standards of&nbsp;<sup>57</sup>FeCl<sub>3</sub>, silicic acid, and nitrate were used for these experiments as for the LT experiments. The ST 2 and LT 2 experiments were set up on the same day, and the time-zero Control treatments were sampled from one set of incubation bottles to represent both experiments. The treated carboys were placed in seawater-flowthrough deckboard incubators, covered with a mesh to allow 40% of surface photosynthetically active radiation (PAR) exposure, and harvested for final timepoint sampling after 22 hours for ST 1A, 40 hours for ST 1B, and 25 hours for ST 2.</p>
<p>&nbsp;</p>
<p><strong>Grow-Out experiments</strong></p>
<p>Subsurface seawater for the grow-out (GO) experiments was collected with modified x-Niskin bottles (12L Ocean Test Equipment, Inc.) on a trace metal clean rosette (Cutter et al. 2017). Casts to collect the seawater were conducted between 11 am and 12 pm local time on the ship. Seawater was collected&nbsp;at depths of 47% and 12% of the surface photosynthetically active radiation (PAR), for a “High Light” and “Low Light” treatment, respectively. Seawater from the x-Niskins was transferred to 1 L PC incubation bottles that had been acid cleaned, Milli-Q conditioned, and rinsed three times with seawater before filling&nbsp;(Hollister et al., 2020; Burns et al., 2023). Three treatments were conducted for each light level: Control (no addition); +Fe (+5 nM&nbsp;<sup>57</sup>FeCl<sub>3</sub>); +Fe+Si (+5 nM&nbsp;<sup>57</sup>FeCl<sub>3</sub>, 20 µM silicic acid); for GO 3, the Fe addition was +0.5 nM&nbsp;<sup>57</sup>FeCl<sub>3</sub>. The same stock standards of&nbsp;<sup>57</sup>FeCl<sub>3</sub>&nbsp;and silicic acid were used for these experiments as for the LT and ST experiments. A replicate incubation bottle for all treatments was prepared in filtered (&lt;0.2 µm; Acropak) seawater and incubated wrapped in heavy duty black construction bags to allow for a dark control and an assessment of abiotic changes in trace metals including wall loss and precipitation.&nbsp;</p>
<p>The PAR intensity (47% and 12%) from the water column&nbsp;was maintained for the incubations by placing the 1-L incubation bottles in custom mesh screen bags designed to achieve the target light levels.&nbsp;All incubation bottles in their respective light treatment bags were placed in the seawater-flowthrough deckboard incubators, and harvested after 67 hours for GO experiment 1, 45 hours for GO experiment 2, and 70 hours for GO experiment 3.</p>
<p>&nbsp;</p>
<p><strong>Incubation sampling</strong></p>
<p>All sampling occurred in a positive pressure hood of HEPA filtered air inside a trace metal clean van built into the RRS Discovery. Incubation sampling occurred at two timepoints: time-zero and time-final. For the LT and ST experiments, the T0.1 and T0.2 1 L bottles constituted the time-zeroes of the incubation treatments with additions. For time-final timepoints, the LT and ST experiments were subsampled from the 20 L PC carboys into 1 L PC bottles after carefully mixing. No sub-sampling was required for the GO experiments, which were conducted in 1 L PC bottles. In all cases, the incubation samples were filtered by vacuum using custom filtration rigs with Teflon dual-stage filter holders (Savillex ®) through two consecutive, acid cleaned polycarbonate track etched (PCTE) filters of 5 µm and 0.4 µm&nbsp;(Burns et al., 2023). The &lt;0.4 µm filtrate was collected for dissolved trace metals in acid-cleaned 125 mL low-density polyethylene (LDPE) bottles, and dissolved macronutrients in acid-cleaned 15 mL polypropylene tubes (Falcon). Dissolved trace metal samples were then acidified to 0.024 M with Optima HCl (pH~ 1.8;&nbsp;(Johnson et al., 2007)) and stored at room temperature until returned to the Buck lab at the University of South Florida for analyses. Dissolved macronutrient samples were stored frozen at -20 °C until returned to the Buck lab at the University of South Florida for analyses.</p>
<p>&nbsp;</p>
<p><strong>Analysis of dissolved trace metals</strong></p>
<p>Sample analysis for dissolved trace metals was conducted at the University of South Florida (USF) College of Marine Science (CMS), and Florida State University (FSU) National High Magnetic Field Laboratory (MagLab). To prepare for analysis, dissolved trace metal samples were transferred to 30 or 15 mL perfluoroalkoxy (PFA) vials with caps containing a quartz-window to enable UV-oxidization. Samples were UV-oxidized at USF for 90 minutes at ~20 mW cm<sup>-2&nbsp;</sup>with an UVO-Cleaner (Jelight; Model No. 5144AX)&nbsp;to liberate organically complexed dissolved Co and Cu (Milne et al. 2010). For cobalt, nickel, and copper, the UV-oxidized and non-UV-oxidized sample results are presented separately.</p>
<p>The automated seaFAST-pico (Elemental Scientific) with a Nobias Chelate-PA1 resin was connected to a High Resolution-Inductively Coupled Plasma-Mass Spectrometer (HR-ICP-MS; Thermo Scientific Element 2 at FSU, Element XR at USF), to preconcentrate and extract trace metals from the seawater samples inline (Lagerström et al. 2013). The reagents and input flow rates for seaFAST were followed from Hollister et al. (2020) and Burns et al. (2023). The elution acid in this study was a solution of 10% HNO<sub>3&nbsp;</sub>(Optima) with 1 ppb Indium as the internal standard. Upon loading the buffered sample (pH ~ 6.2 ± 0.2;&nbsp;Burns et al., 2023)&nbsp;in the resin column, the column was rinsed with Milli-Q (≥18.2 MΩ·cm) to wash out seawater salts, and the chelated trace metals were eluted with the elution acid containing the internal standard. The eluent from seaFAST was then drawn by the ICP-MS and analyzed for the natural abundance of Mn, Fe, Co, Ni, Cu, Zn, Cd, and Pb. Samples were analyzed twice, on the Element 2 at FSU, and on the Element XR at USF.</p>
<p>All analytical runs were comprised of seawater samples, instrument-manifold air blanks, quality control (QC) samples, a matrix-matched multielement calibration curve containing all target metals, matrix-matched molybdenum (Mo), two Fe57 calibration curves, including an Fe57 calibration curve made in 5% HNO<sub>3</sub>&nbsp;(Optima) and a matrix-matched Fe57 curve, and certified reference materials, including SAFe D2, GEOTRACES GSP, and NASS-7. All seawater calibration curves and reference samples were prepared and treated the same as the seawater samples throughout the analytical runs.&nbsp;</p>
<p>The in-house QC consisted of 2-L aliquots of filtered (&lt;0.2 µm) PAP-SO surface seawater (49.20469 °N, -14.78163 °E) that was collected in bulk on the 2021 EXPORTS cruise and then subsampled and acidified to 0.024 M HCl (Optima) for each QC aliquot. The matrix-matched curves, including the multielement, Mo, and Fe57 calibration curves were made using the same seawater as the QC to match the matrix of the seawater samples. The matrix-matched multielement calibration curve was made by dilution from a set of working stocks containing the target metals. These working stocks were diluted from ICP primary standards of 1000 µg/mL in 2% HNO<sub>3</sub>&nbsp;of Mn (SPEX CertiPrep), Fe, Co, Ni, Cu, Cd (ULTRA Scientific), Zn and Pb (RICCA) diluted with 5% HNO<sub>3&nbsp;</sub>(Optima, Fisher) elution acid matrix. The Mo ICP primary standard consisted of 1000 µg/mL Mo in H<sub>2</sub>O (SPEX CertiPrep), from which a Mo working stock was made by dilution with 5% HNO<sub>3</sub>&nbsp;(Optima, Fisher). The Fe57 primary standard consisted of Fe57 oxide enriched to 96.64% (ISOFLEX), which was dissolved in HCl to make a concentrated stock of&nbsp;<sup>57</sup>FeCl<sub>3</sub>. For this work, two working stocks of 186 µM and 10 µM&nbsp;<sup>57</sup>FeCl<sub>3</sub>&nbsp;were used to achieve Fe additions in 22 L and 1 L incubation bottles. Calibration curves for Fe57 were made with by dilution of the 10 µM working stock in acid-cleaned, 125 mL LDPE bottles.</p>
<p>The analytical runs usually began by conditioning the inline seaFAST-ICP-MS with a few samples of filtered seawater, followed by several air and MQ blanks, calibration curves including the multielement, Mo, and Fe57 curves, certified reference materials (also included in the middle of each analytical run to allow replicate measurements), seawater samples, several QC samples spread throughout the analytical run (every ~15th sample), several additional air blanks, and finalized by air blank samples. Sample trace metal concentrations were determined from calibration curves of the intensity counts against standards of known concentrations and corrected for average air blanks in the sequence as described previously by Hollister et al. (2020) and Burns et al. (2023).&nbsp;</p>
<p>&nbsp;</p>
<p><strong>Analysis of dissolved macronutrients</strong></p>
<p>Macronutrient samples were thawed at room temperature and analyzed following standard colorimetric methods (Parsons et al. 1984; Becker et al. 2020) using a QuAAtro39 AutoAnalyzer (SEAL Analytical) at USF. The analytical runs included seawater samples, calibration curves made in artificial seawater, reagent blanks consisting of the artificial seawater used to make the calibration curves, reference materials including CK, CL, and CO (KANSO TECHNOS), and QC samples, including standards with known concentrations of nitrite and nitrate to check the efficiency of the instrument’s cadmium column, and the lowest and middle-high standards of the calibration curve to check and correct for drift. QC samples were added approximately every 12th sample to assess the quality of the analytical run. Values below these limits of detection are reported as 0 µM with accompanying QC Flag 6. Sample analyses for macronutrients were performed by senior researcher Salvatore Caprara in the Buck lab at the University of South Florida.</p>
Specified by the Principal Investigator(s)
<p>Data were flagged using the SeaDataNet quality flag scheme following GEOTRACES guidelines see:&nbsp;<a href="https://www.geotraces.org/geotraces-quality-flag-policy/">https://www.geotraces.org/geotraces-quality-flag-policy/</a>).&nbsp;Additional notes specific to the application of these flags to this project are noted in brackets […].</p>
<p>&nbsp;</p>
<p>0: No Quality Control: No quality control procedures have been applied to the data value. This is the initial status for all data values entering the working archive. [Not used].</p>
<p>1: Good Value: Good quality data value that is not part of any identified malfunction and has been verified as consistent with real phenomena during the quality control process.&nbsp;[Used for analyses that included replicates and/or reference samples;&nbsp;see&nbsp;Table 2&nbsp;for blank and certified reference material values obtained in this study].</p>
<p>2: Probably Good Value: Data value that is probably consistent with real phenomena, but this is unconfirmed or data value forming part of a malfunction that is considered too small to affect the overall quality of the data object of which it is a part. [Used when no replicate measurements or reference samples were available to check the quality of the data].</p>
<p>3: Probably Bad Value: Data value recognized as unusual during quality control that forms part of a feature that is probably inconsistent with real phenomena. [Used when all replicate measurements were too high to be consistent with real phenomena].</p>
<p>4: Bad Value: An obviously erroneous data value. [Not used].</p>
<p>5: Changed Value: Data value adjusted during quality control. Best practice strongly recommends that the value before the change be preserved in the data or its accompanying metadata. [Not used].</p>
<p>6: Value Below Detection Limit: The level of the measured phenomenon was less than the limit of detection (LOD) for the method employed to measure it. The accompanying value is the detection limit for the technique or zero if that value is unknown. [Instead of showing LOD values, “&lt;LOD” was used in the data file. See&nbsp;Table 2&nbsp;for detection limits of the dissolved trace metals].</p>
<p>7: Value in Excess: The level of the measured phenomenon was too large to be quantified by the technique employed to measure it. The accompanying value is the measurement limit for the technique. [Not used].</p>
<p>8: Interpolated Value: This value has been derived by interpolation from other values in the data object. [Not used].</p>
<p>9: Missing Value: The data value is missing. Any accompanying value will be a magic number representing absent data [When sample was not collected the notation ‘na’ for ‘not applicable’ was used; when sample collected but there is no result for this parameter, the notation ‘nda’ for ‘no data available’ was used].</p>
<p>A: Value Phenomenon Uncertain: There is uncertainty in the description of the measured phenomenon associated with the value such as chemical species or biological entity. [Not used.]</p>
Specified by the Principal Investigator(s)
- Dates converted from %m/%d/%y to %Y-%M-%D format.
- Spaces removed from column names.
- Supplemental files converted from Word documents to PDFs.
Specified by BCO-DMO Data Managers
asNeeded
7.x-1.1
Biological and Chemical Oceanography Data Management Office (BCO-DMO)
Unavailable
508-289-2009
WHOI MS#36
Woods Hole
MA
02543
USA
info@bco-dmo.org
http://www.bco-dmo.org
Monday - Friday 8:00am - 5:00pm
For questions regarding this resource, please contact BCO-DMO via the email address provided.
pointOfContact
Seabird SBE 32
Seabird SBE 32
PI Supplied Instrument Name: Seabird SBE 32 PI Supplied Instrument Description:Seabird SBE 32 trace metals frame and rosette sampling system were used for depth profile sample collection. Instrument Name: Discrete water sampler Instrument Short Name: Instrument Description: A device that collects an in-situ discrete water sample from any depth and returns it to the surface without contamination by the waters through which it passes, such as a water bottle.
ThermoScientific Element II
ThermoScientific Element II
PI Supplied Instrument Name: ThermoScientific Element II PI Supplied Instrument Description:A ThermoScientific Element II high-resolution inductively coupled plasma mass spectrometer was used to measure dissolved metal concentrations.
A Thermo Scientific Element XR and ThermoScientific Element II were both used for dissolved metal concentrations during this experiment. The Element II was used for the UV data and the Element XR for the noUV data for each parameter. Instrument Name: Inductively Coupled Plasma Mass Spectrometer Instrument Short Name:ICP Mass Spec Instrument Description: An ICP Mass Spec is an instrument that passes nebulized samples into an inductively-coupled gas plasma (8-10000 K) where they are atomized and ionized. Ions of specific mass-to-charge ratios are quantified in a quadrupole mass spectrometer. Community Standard Description: http://vocab.nerc.ac.uk/collection/L05/current/LAB15/
Inductively Couple Plasma Mass Spectrometer (ThermoScientific Element XR)
Inductively Couple Plasma Mass Spectrometer (ThermoScientific Element XR)
PI Supplied Instrument Name: Inductively Couple Plasma Mass Spectrometer (ThermoScientific Element XR) PI Supplied Instrument Description:ThermoScientific Element XR high resolution inductively coupled plasma mass spectrometer was used to measure dissolved metal concentrations.
A Thermo Scientific Element XR and ThermoScientific Element II were both used for dissolved metal concentrations during this experiment. The Element II was used for the UV data and the Element XR for the noUV data for each parameter. Instrument Name: Inductively Coupled Plasma Mass Spectrometer Instrument Short Name:ICP Mass Spec Instrument Description: An ICP Mass Spec is an instrument that passes nebulized samples into an inductively-coupled gas plasma (8-10000 K) where they are atomized and ionized. Ions of specific mass-to-charge ratios are quantified in a quadrupole mass spectrometer. Community Standard Description: http://vocab.nerc.ac.uk/collection/L05/current/LAB15/
QuAAtro39 AutoAnalyzer (SEAL Analytical)
QuAAtro39 AutoAnalyzer (SEAL Analytical)
PI Supplied Instrument Name: QuAAtro39 AutoAnalyzer (SEAL Analytical) PI Supplied Instrument Description:QuAAtro39 AutoAnalyzer (SEAL Analytical) was used to measure macronutrient concentrations in seawater samples. Instrument Name: Nutrient Autoanalyzer Instrument Short Name:Nutrient Autoanalyzer Instrument Description: Nutrient Autoanalyzer is a generic term used when specific type, make and model were not specified. In general, a Nutrient Autoanalyzer is an automated flow-thru system for doing nutrient analysis (nitrate, ammonium, orthophosphate, and silicate) on seawater samples. Community Standard Description: http://vocab.nerc.ac.uk/collection/L05/current/LAB04/
Elemental Scientific seaFAST-pico System
Elemental Scientific seaFAST-pico System
PI Supplied Instrument Name: Elemental Scientific seaFAST-pico System PI Supplied Instrument Description:Elemental Scientific seaFAST-pico system was used to preconcentrate dissolved trace metals from project samples for the ICPMS analyses. Instrument Name: SeaFAST Automated Preconcentration System Instrument Short Name: Instrument Description: The seaFAST is an automated sample introduction system for analysis of seawater and other high matrix samples for analyses by ICPMS (Inductively Coupled Plasma Mass Spectrometry).
Trace Metal Clean Towfish
Trace Metal Clean Towfish
PI Supplied Instrument Name: Trace Metal Clean Towfish PI Supplied Instrument Description:Seawater samples were collected with a custom surface sampling system, “towfish”, comprised of acid cleaned Bev-A-Line-IV tubing and an Almatec Double PTFE Diaphragm Pump.
Further details about this homemade towfish can be found in Mellett and Buck 2020. Please refer to the related methods publications of this dataset. Instrument Name: towed unmanned submersible Instrument Short Name:towed unmanned submersible Instrument Description: A vehicle towed by rigid cable through the water column at fixed or varying depth with no propulsion and no human operator (e.g. Towfish, Scanfish, UOR, SeaSoar).
Cruise: DY131
DY131
Community Standard Description
International Council for the Exploration of the Sea
RRS Discovery
vessel
DY131
Craig M. Lee
University of Washington
https://www.bodc.ac.uk/resources/inventories/cruise_inventory/reports/dy131.pdf
Report describing DY131
Community Standard Description
International Council for the Exploration of the Sea
RRS Discovery
vessel