http://lod.bco-dmo.org/id/dataset/966896
eng; USA
utf8
dataset
Highest level of data collection, from a common set of sensors or instrumentation, usually within the same research project
Biological and Chemical Oceanography Data Management Office (BCO-DMO)
Unavailable
508-289-2009
WHOI MS#36
Woods Hole
MA
02543
USA
info@bco-dmo.org
http://www.bco-dmo.org
Monday - Friday 8:00am - 5:00pm
For questions regarding this resource, please contact BCO-DMO via the email address provided.
pointOfContact
2025-07-03
ISO 19115-2 Geographic Information - Metadata - Part 2: Extensions for Imagery and Gridded Data
ISO 19115-2:2009(E)
OOI Coastal Pioneer New England Shelf Array CTD and Discrete Water Sampling Data from Mooring Overturning Cruises at the New England Continental Shelf from 2013-2022 (OOI Cruise Data Project)
2025-07-03
publication
2025-07-03
revision
Marine Biological Laboratory/Woods Hole Oceanographic Institution Library (MBLWHOI DLA)
2025-08-20
publication
https://doi.org/10.26008/1912/bco-dmo.966896.1
Albert Plueddemann
Woods Hole Oceanographic Institution
principalInvestigator
Biological and Chemical Oceanography Data Management Office (BCO-DMO)
Unavailable
508-289-2009
WHOI MS#36
Woods Hole
MA
02543
USA
info@bco-dmo.org
http://www.bco-dmo.org
Monday - Friday 8:00am - 5:00pm
For questions regarding this resource, please contact BCO-DMO via the email address provided.
publisher
Cite this dataset as: NSF Ocean Observatories Initiative (2025) OOI Coastal Pioneer New England Shelf Array CTD and Discrete Water Sampling Data from Mooring Overturning Cruises at the New England Continental Shelf from 2013-2022 (OOI Cruise Data Project). Biological and Chemical Oceanography Data Management Office (BCO-DMO). (Version 1) Version Date 2025-07-03 [if applicable, indicate subset used]. doi:10.26008/1912/bco-dmo.966896.1 [access date]
OOI Coastal Pioneer NES Array CTD and Discrete Water Sampling Data from Mooring Overturning Cruises Dataset Description: <p><strong>OOI-CGSN CTD Sampling Guidelines</strong></p>
<p>In general, water samples are collected for analysis at depths that correspond to instrumentation making in situ measurements.&nbsp; For example, Near Surface Instrument Frames (NSIFs) have instrumentation that measure dissolved oxygen (DO), salinity (CTD), nitrate (NUTNR), the partial pressure of CO2 (CO2), and chlorophyll a fluorescence, so water samples should be collected at the depth of the NSIF for analyses of all those parameters.&nbsp; Additionally, as noted above, OOI water sampling data are valid long-term datasets in and of themselves. Thus, some measurement locations are driven by broader science questions.</p>
<p>Soak Time –&nbsp;The CTD rosette should be allowed to equilibrate (e.g., the CTD sensor readout stabilizes) at the desired target depth for at least 1 minute or more depending on conditions.&nbsp; Longer soak times may occur to accommodate acoustic release testing or other activities.</p>
<p>&nbsp;</p>
<p><strong>Citing&nbsp;OOI Data</strong></p>
<p>Refer to specific guidance related to citing&nbsp;OOI data on the OOI website at&nbsp;https://oceanobservatories.org/how-to-use-acknowledge-and-cite-data/.&nbsp;</p> Methods and Sampling: <p><strong>OOI Coastal Pioneer NES Array Sampling Guidelines</strong></p>
<p>The location of the Coastal Pioneer Array from 2013 through 2022 is the New England Shelf (NES).&nbsp; The Pioneer-NES Array consists of 3 Coastal Surface Moorings, 5-7 Coastal Profiler Moorings (depending on the season), and mobile assets.&nbsp; Coastal Gliders are present in the Array year-round.&nbsp; Coastal Profiling Gliders are present in the Summer at the Inshore and Central sites (they are replaced by Profiler Moorings in the Winter).&nbsp; AUVs are operated in the Array during OOI cruises.</p>
<p>Subsections below define the strategy for sampling in the vicinity of each type of platform.</p>
<p>There are a few general guidelines which also inform the strategies defined below:</p>
<ul>
<li>Collect 4-6 water samples spaced throughout the water column (7 m, bottom, and 2-3 in between).</li>
<li>Depths selected based on water column stratification and/or location of min/max features (e.g., O<sub>2</sub> minimum, Chlorophyll maximum).</li>
<li>Collect Chlorophyll in surface waters down to ~50 m + one deep sample (or where a fluorescence signal is no longer detected).</li>
<li>Collect DIC/TA, pH at 7 m and at the bottom, and DIC/TA at intermediate depths.</li>
</ul>
<p>Coastal Surface Mooring Sampling</p>
<ul>
<li>Collect 4-6 water samples spaced throughout the water column (7 m, bottom, and 2-3 in between).</li>
<li>Depths selected based on water column stratification and/or location of min/max features (e.g., O<sub>2</sub> minimum, Chlorophyll maximum).</li>
<li>Collect Chlorophyll in surface waters down to ~50 m + one deep sample (or where a fluorescence signal is no longer detected).</li>
<li>Collect DIC/TA, pH at 7 m and at the bottom, and DIC/TA at intermediate depths.</li>
</ul>
<p>Coastal Profiler Mooring Sampling</p>
<ul>
<li>Collect 4-6 water samples spaced throughout the water column (7 m, bottom, and 2-3 in between).</li>
<li>Depths selected based on water column stratification and/or location of min/max features (e.g., O<sub>2</sub> minimum, Chlorophyll maximum).</li>
<li>Collect Chlorophyll in surface waters down to ~50 m + one deep sample (no need to sample where a fluorescence signal is no longer detected).</li>
<li>Collect Nutrient and Carbon samples even though not measured on mooring; provides a valuable, consistent dataset across the array.</li>
<li>For carbon measurements – pH is most important at depth and at the surface; DIC/TA is important throughout water column and at depths with nutrient sampling.</li>
<li>If reduction in sampling is needed, consider not sampling Nutrients and Carbon at the upstream sites (UI, UO).</li>
</ul>
<p>Sampling Associated with Mobile Assets</p>
<ul>
<li>Collect 4-5 water samples spaced throughout the water column (surface, bottom, and 2-3 in between)</li>
<li>Depths selected based on water column stratification and/or location of min/max features (e.g., O<sub>2</sub> minimum, Chlorophyll max)</li>
<li>Collect Chlorophyll in surface waters down to ~50 m + one deep sample (no need to sample where a fluorescence signal is no longer detected)</li>
<li>AUVs and Profiling Gliders – sample at 7 m instead of surface, and include nutrient sampling (because these vehicles transit close to Surface Moorings with an NSIF at 7 m).</li>
</ul>
<p><strong>Methods</strong></p>
<p>Salinity</p>
<p>Salinity measurements are performed following the methodology outlined in the WHOI Hydrography Blue Book,&nbsp;<em>Automated Oxygen Titration and Salinity Determination</em>&nbsp;(Knapp et al. 1990). Measurements are performed using a Guildline Autosal model 8400B salinometer (Guildline Instruments of Canada). Manufacturer stated accuracy and precision at 35 psu is +/- 0.003 psu and 0.0002 psu. IAPSO standard seawater is used to standardize the Autosal daily before runs.</p>
<p>Oxygen</p>
<p>Dissolved oxygen measurements are performed following the methodology outlined in the WHOI Hydrography Blue Book Automated Oxygen Titration and Salinity Determination (Knapp et al. 1990). Measurements are performed using a Metrohm Model 888 Titrando dosing device, with the titration endpoint determined amperometrically. Stated accuracy is 0.02 ml/l, with a precision of 0.001 ml/l.</p>
<p>Nutrients</p>
<p>All nutrient values are reported as the average of triplicate analysis on a single collected sample.</p>
<p>Carbon System</p>
<p>Carbon system measurements are performed by the Wang lab (Woods Hole Oceanographic Institution). DIC and TA measurements follow the methodology of Wang and Cai (2004) with uncertainties of 2 umol/kg. DIC measurements are performed with an Apollo Sci-Tech AS-C3. TA measurements are performed with an Apollo Sci-Tech AS-ALK2 and ROSS electrode. pH measurements follow the methodology of Clayton and Byrne (1993) with an uncertainty of 0.002 pH units using an Agilent 8453.</p>
<p>Chlorophyll and Phaeo</p>
<p>Analysis was completed using a Turner Designs Aquafluor Handheld 800446</p>
Funding provided by NSF Division of Ocean Sciences (NSF OCE) Award Number: OCE-1026342 Award URL: https://www.nsf.gov/awardsearch/show-award?AWD_ID=1026342
Funding provided by NSF Division of Ocean Sciences (NSF OCE) Award Number: OCE-1743430 Award URL: https://www.nsf.gov/awardsearch/show-award?AWD_ID=1743430
Funding provided by NSF Division of Ocean Sciences (NSF OCE) Award Number: OCE-2244833
completed
Albert Plueddemann
Woods Hole Oceanographic Institution
508-289-2789
266 Woods Hole Road CLARK 202A, Mail Stop: 29
Woods Hole
MA
02543-1535
USA
aplueddemann@whoi.edu
pointOfContact
asNeeded
Dataset Version: 1
Unknown
Cruise
Station
Target_Asset
Start_Latitude
Start_Longitude
Start_Time
Cast
Cast_Flag
Bottom_Depth_at_Start_Position
CTD_File
CTD_File_Flag
Niskin_Bottle_Position
Niskin_Flag
CTD_Bottle_Closure_Time
CTD_Pressure
CTD_Pressure_Flag
CTD_Depth
CTD_Latitude
CTD_Longitude
CTD_Temperature_1
CTD_Temperature_1_Flag
CTD_Temperature_2
CTD_Temperature_2_Flag
CTD_Conductivity_1
CTD_Conductivity_1_Flag
CTD_Conductivity_2
CTD_Conductivity_2_Flag
CTD_Salinity_1
CTD_Salinity_2
CTD_Oxygen
CTD_Oxygen_Flag
CTD_Oxygen_Saturation
CTD_Fluorescence
CTD_Fluorescence_Flag
CTD_Beam_Attenuation
CTD_Beam_Transmission
CTD_Transmissometer_Flag
CTD_pH
CTD_pH_Flag
Discrete_Oxygen
Discrete_Oxygen_Flag
Discrete_Oxygen_Replicate_Flag
Discrete_Chlorophyll
Discrete_Phaeopigment
Discrete_Fo_Fa_Ratio
Discrete_Fluorescence_Flag
Discrete_Fluorescence_Replicate_Flag
Discrete_Phosphate
Discrete_Silicate
Discrete_Nitrate
Discrete_Nitrite
Discrete_Ammonium
Discrete_Nutrients_Flag
Discrete_Nutrients_Replicate_Flag
Discrete_Salinity
Discrete_Salinity_Flag
Discrete_Salinity_Replicate_Flag
Discrete_Alkalinity
Discrete_Alkalinity_Flag
Discrete_Alkalinity_Replicate_Flag
Discrete_DIC
Discrete_DIC_Flag
Discrete_DIC_Replicate_Flag
Discrete_pCO2
pCO2_Analysis_Temp
Discrete_pCO2_Flag
Discrete_pCO2_Replicate_Flag
Discrete_pH
pH_Analysis_Temp
Discrete_pH_Flag
Discrete_pH_Replicate_Flag
Calculated_Alkalinity
Calculated_DIC
Calculated_pCO2
Calculated_pH
Calculated_CO2aq
Calculated_Bicarb
Calculated_CO3
Calculated_Omega_C
Calculated_Omega_A
Apollo Sci-Tech AS-ALK2 and ROSS electrode
8400B salinometer (Guildline Instruments of Canada)
Niskin
SBE 43
Metrohm Model 888 Titrando dosing device
WL CSTAR Trans
theme
None, User defined
Cruise identfier
station id
latitude at start time of measurement
longitude at start time of measurement
time begin
cast
quality flag
depth begin
file_name
Niskin bottle number
time_end
water pressure
depth
latitude
longitude
water temperature at measurement depth
conductivity
salinity
dissolved Oxygen
O2 saturation
fluorescence
beam attenuation
transmissometer id
pH
chl_tot
total phaeopigment
ratio of chlorophyll-a to phaeopigment
phosphate
Silicate, Si(OH)4, silicic acid
Nitrate
Nitrite
Ammonium
bottle salinity
total alkalinity (TA)
dissolved inorganic Carbon
Partial pressure of CO2
bicarbonate concentration [HCO3]-
Carbonate concentration [CO3]2-
No BCO-DMO term
featureType
BCO-DMO Standard Parameters
Apollo SciTech AS-ALK2 total alkalinity titrator
Autosal salinometer
Niskin bottle
Sea-Bird SBE 43 Dissolved Oxygen Sensor
Titrator
WET Labs {Sea-Bird WETLabs} C-Star transmissometer
instrument
BCO-DMO Standard Instruments
KN217
KN222
KN224
AT27
AT31A
AR4A
AR8A
AR18A
AR24A
AR28A
AR34A
AR39A
AR44
AR48
AR52A
AR61A
AR66A
AR70A
AT31B
AT31C
AR4B
AR4C
AR8B
AR18B
AR18C
AR24B
AR24C
AR28B
AR31A
AR31B
AR31C
AR34B
AR39B
AR52B
AR61B
AR66B
AR70B
service
Deployment Activity
Slope Sea, North Atlantic
place
Locations
otherRestrictions
otherRestrictions
Access Constraints: none. Use Constraints: Please follow guidelines at: http://www.bco-dmo.org/terms-use Distribution liability: Under no circumstances shall BCO-DMO be liable for any direct, incidental, special, consequential, indirect, or punitive damages that result from the use of, or the inability to use, the materials in this data submission. If you are dissatisfied with any materials in this data submission your sole and exclusive remedy is to discontinue use.
Ocean Observatories Initiative
http://oceanobservatories.org/
Ocean Observatories Initiative
The Ocean Observatories Initiative (OOI) is a science-driven ocean observing network that delivers real-time data to address critical science questions regarding the world's oceans. Funded by the National Science Foundation to encourage scientific investigation, OOI data are freely available online to anyone with an Internet connection. OOI was designed as a long-term project to collect ocean data for up to 30 years. This longevity makes it possible to measure and directly observe both short-lived episodic events and longer-term changes occurring in the ocean. Such data make it possible to better understand ocean processes and how the ocean is changing.
The OOI has five active research arrays that comprise the three major observatory elements linked together by instrument, infrastructure, and information management systems. Global Ocean Arrays consist of moored arrays and autonomous vehicles that provide time-series observations and mesoscale spatial sampling at sparsely sampled, high-latitude regions critical to our understanding of climate, the carbon cycle, and ocean circulation. The Regional Cabled Array consists of fiber-optic cables off the Oregon coast that provide unprecedented power, bandwidth, and communication to seafloor instrumentation and profiler moorings, enabling monitoring of volcanic and hydrothermal activity, methane seeps, earthquakes, and myriad ocean processes in coastal and blue water environments. Coastal Arrays consist of cross-shelf moored arrays and autonomous vehicles that observe the dynamic coastal environment, enabling examination of upwelling, shelf break fronts, and cross-shelf exchanges.
These marine arrays are outfitted with more than 900 instruments — of 45 different types — measuring more than 200 different parameters. These instruments gather physical, chemical, geological, and biological data – from the air-sea interface to the seafloor. The data collected are transmitted through a cyberinfrastructure, an information management system that allows users to access real- to near real-time data from suites of sensors. The OOI provides annotations and automated quality control for data streams and is working to meet the IOOS Quality Assurance of Real Time Ocean Data (QARTOD) standards.
OOI
largerWorkCitation
program
OOI Discrete CTD and Water Sampling Cruise Data
https://oceanobservatories.org/
OOI Discrete CTD and Water Sampling Cruise Data
<p>The hydrographic sampling performed by the Ocean Observatories Initiative (OOI) as part of each research array turn represents a significant collection of valuable physical, chemical, and biological information. The collected hydrographic data include oxygen, salinity, nutrient (nitrate, nitrite, silicate, phosphate, ammonium), chlorophyll, and carbon system (dissolved inorganic carbon, total alkalinity, pH and partial pressure of CO<sub>2</sub>) measurements. These data serve several important functions. First, they are necessary for the validation and evaluation of the moored instrumentation at each Array. Furthermore, the annual (Global Arrays and the Regional Cabled Array (RCA) or biannual (Coastal Arrays and the Endurance Array) collection of data at the same locations provides a unique timeseries of a large set of water properties following established community standards and methods, independent of its association with the OOI instrumentation.</p>
<p> </p>
OOI Cruise Data
largerWorkCitation
project
eng; USA
oceans
Slope Sea, North Atlantic
-71.4217
-70.187667
39.0983833
41.19911667
2014-04-12
2022-11-22
0
BCO-DMO catalogue of parameters from OOI Coastal Pioneer New England Shelf Array CTD and Discrete Water Sampling Data from Mooring Overturning Cruises at the New England Continental Shelf from 2013-2022 (OOI Cruise Data Project)
Biological and Chemical Oceanography Data Management Office (BCO-DMO)
Unavailable
508-289-2009
WHOI MS#36
Woods Hole
MA
02543
USA
info@bco-dmo.org
http://www.bco-dmo.org
Monday - Friday 8:00am - 5:00pm
For questions regarding this resource, please contact BCO-DMO via the email address provided.
pointOfContact
http://lod.bco-dmo.org/id/dataset-parameter/967768.rdf
Name: Cruise
Units: unitless
Description: <p>Cruise name associated with data collection.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967769.rdf
Name: Station
Units: unitless
Description: <p>Station ID number. Station numbers are unique per cruise but not unique within the overall dataset.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967770.rdf
Name: Target_Asset
Units: unitless
Description: <p>OOI platform located near to where the cast is made. Typically this is representative of a mooring or glider deployment or recovery location, or the location of a test cast.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967771.rdf
Name: Start_Latitude
Units: decimal degrees
Description: <p>Latitude derived from the elog reading at the beginning of the cast.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967772.rdf
Name: Start_Longitude
Units: decimal degrees
Description: <p>Longitude derived from the elog reading at the beginning of the cast.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967773.rdf
Name: Start_Time
Units: unitless
Description: <p>Start time of the cast.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967774.rdf
Name: Cast
Units: unitless
Description: <p>Cast ID number</p>
http://lod.bco-dmo.org/id/dataset-parameter/967775.rdf
Name: Cast_Flag
Units: unitless
Description: <p>16-bit array data quality flag indicating any relevant nuances or details related to the particular cast. For full flag details, see the Readme file for this dataset, available in the Supplemental Files section of the related BCO-DMO metadata page.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967776.rdf
Name: Bottom_Depth_at_Start_Position
Units: meters (m)
Description: <p>Depth of seafloor at the start time of a cast.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967777.rdf
Name: CTD_File
Units: unitless
Description: <p>File name of CTD file generated during a cast.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967778.rdf
Name: CTD_File_Flag
Units: unitless
Description: <p>16-bit array data quality flag indicating any relevant nuances or details related to the CTD file. For full flag details, see the Readme file for this dataset, available in the Supplemental Files section of the related BCO-DMO metadata page.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967779.rdf
Name: Niskin_Bottle_Position
Units: unitless
Description: <p>Position of niskin bottle in the CTD rosette.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967780.rdf
Name: Niskin_Flag
Units: unitless
Description: <p>16-bit array data quality flag indicating any relevant nuances or details related to the Niskin bottle. For full flag details, see the Readme file for this dataset, available in the Supplemental Files section of the related BCO-DMO metadata page.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967781.rdf
Name: CTD_Bottle_Closure_Time
Units: unitless
Description: <p>Datetime of Niskin bottle closure.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967782.rdf
Name: CTD_Pressure
Units: db
Description: <p>Pressure measurement from CTD digiquartz pressure sensor.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967783.rdf
Name: CTD_Pressure_Flag
Units: unitless
Description: <p>16-bit array data quality flag indicating any relevant nuances or details related to the CTD pressure reading. For full flag details, see the Readme file for this dataset, available in the Supplemental Files section of the related BCO-DMO metadata page.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967784.rdf
Name: CTD_Depth
Units: meters (m)
Description: <p>Depth of CTD at the CTD_Bottle_Closure_Time.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967785.rdf
Name: CTD_Latitude
Units: decimal degrees
Description: <p>Latitude of CTD at the CTD_Bottle_Closure_Time.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967786.rdf
Name: CTD_Longitude
Units: decimal degrees
Description: <p>Longitude of CTD at the CTD_Bottle_Closure_Time.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967787.rdf
Name: CTD_Temperature_1
Units: deg C
Description: <p>Temperature measurement from CTD ITS-90 temperature sensor at the CTD_Bottle_Closure_Time.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967788.rdf
Name: CTD_Temperature_1_Flag
Units: unitless
Description: <p>16-bit array data quality flag indicating any relevant nuances or details related to CTD_Temperature_1. For full flag details, see the Readme file for this dataset, available in the Supplemental Files section of the related BCO-DMO metadata page.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967789.rdf
Name: CTD_Temperature_2
Units: deg C
Description: <p>Temperature measurement from CTD ITS-90 temperature sensor at the CTD_Bottle_Closure_Time.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967790.rdf
Name: CTD_Temperature_2_Flag
Units: unitless
Description: <p>16-bit array data quality flag indicating any relevant nuances or details related to CTD_Temperature_1. For full flag details, see the Readme file for this dataset, available in the Supplemental Files section of the related BCO-DMO metadata page.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967791.rdf
Name: CTD_Conductivity_1
Units: S/m
Description: <p>CTD conductivity measurement at the CTD_Bottle_Closure_Time.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967792.rdf
Name: CTD_Conductivity_1_Flag
Units: unitless
Description: <p>16-bit array data quality flag indicating any relevant nuances or details related to CTD_Conductivity_1. For full flag details, see the Readme file for this dataset, available in the Supplemental Files section of the related BCO-DMO metadata page.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967793.rdf
Name: CTD_Conductivity_2
Units: S/m
Description: <p>CTD conductivity measurement at the CTD_Bottle_Closure_Time.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967794.rdf
Name: CTD_Conductivity_2_Flag
Units: unitless
Description: <p>16-bit array data quality flag indicating any relevant nuances or details related to CTD_Conductivity_2. For full flag details, see the Readme file for this dataset, available in the Supplemental Files section of the related BCO-DMO metadata page.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967795.rdf
Name: CTD_Salinity_1
Units: PSU
Description: <p>Salinity value calculated from CTD_Conductivity_1.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967796.rdf
Name: CTD_Salinity_2
Units: PSU
Description: <p>Salinity value calculated from CTD_Conductivity_2.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967797.rdf
Name: CTD_Oxygen
Units: mL/L
Description: <p>Oxygen measurement taken at CTD_Bottle_Closure_Time by the SBE 43 sensor.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967798.rdf
Name: CTD_Oxygen_Flag
Units: unitless
Description: <p>16-bit array data quality flag indicating any relevant nuances or details related to CTD_Oxygen. For full flag details, see the Readme file for this dataset, available in the Supplemental Files section of the related BCO-DMO metadata page.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967799.rdf
Name: CTD_Oxygen_Saturation
Units: mL/L
Description: <p>Derived oxygen saturation value at time of CTD_Bottle_Closure_Time. This calculation is based on the Garcia & Gordon equation.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967800.rdf
Name: CTD_Fluorescence
Units: mg/m^3
Description: <p>CTD fluorescence measurement taken at time of CTD_Bottle_Closure_Time. CGSN does not typically measure this parameter on CTD casts.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967801.rdf
Name: CTD_Fluorescence_Flag
Units: unitless
Description: <p>16-bit array data quality flag indicating any relevant nuances or details related to CTD_Fluorescence. For full flag details, see the Readme file for this dataset, available in the Supplemental Files section of the related BCO-DMO metadata page.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967802.rdf
Name: CTD_Beam_Attenuation
Units: 1/m
Description: <p>Beam Attenuation measurement from WET Labs C-Star sensor taken at CTD_Bottle_Closure_Time.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967803.rdf
Name: CTD_Beam_Transmission
Units: percentage transmittance
Description: <p>Beam transmission measurement from WET Labs C-Star sensor taken at time of CTD_Bottle_Closure_Time.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967804.rdf
Name: CTD_Transmissometer_Flag
Units: unitless
Description: <p>16-bit array data quality flag indicating any relevant nuances or details related to CTD_Beam_Transmission. For full flag details, see the Readme file for this dataset, available in the Supplemental Files section of the related BCO-DMO metadata page.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967805.rdf
Name: CTD_pH
Units: unitless
Description: <p>pH measurement taken from CTD cast. CGSN does not measure this parameter on CTD casts.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967806.rdf
Name: CTD_pH_Flag
Units: unitless
Description: <p>pH measurement taken from CTD cast. CGSN does not measure this parameter on CTD casts.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967807.rdf
Name: Discrete_Oxygen
Units: mL/L
Description: <p>Discrete Oxygen value taken from the collected water sample.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967808.rdf
Name: Discrete_Oxygen_Flag
Units: unitless
Description: <p>16-bit array data quality flag indicating any relevant nuances or details related to Discrete_Oxygen. For full flag details, see the Readme file for this dataset, available in the Supplemental Files section of the related BCO-DMO metadata page. These flags can be traced back to comments written in the CTD Sampling Log.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967809.rdf
Name: Discrete_Oxygen_Replicate_Flag
Units: unitless
Description: <p>16-bit array data quality flag indicating any relevant nuances or details related to Discrete_Oxygen replicates. For full flag details, see the Readme file for this dataset, available in the Supplemental Files section of the related BCO-DMO metadata page. These flags can be traced back to comments written in the CTD Sampling Log.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967810.rdf
Name: Discrete_Chlorophyll
Units: ug/L
Description: <p>Discrete Chlorophyll measurement taken from the collected water sample.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967811.rdf
Name: Discrete_Phaeopigment
Units: ug/L
Description: <p>Discrete phaeopigment measurement taken from the collected water sample.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967812.rdf
Name: Discrete_Fo_Fa_Ratio
Units: unitless
Description: <p>Acidification ratio for pure Chl. CGSN does not measure this parameter.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967813.rdf
Name: Discrete_Fluorescence_Flag
Units: unitless
Description: <p>16-bit array data quality flag indicating any relevant nuances or details related to Discrete_Fluorescence. For full flag details, see the Readme file for this dataset, available in the Supplemental Files section of the related BCO-DMO metadata page.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967814.rdf
Name: Discrete_Fluorescence_Replicate_Flag
Units: unitless
Description: <p>16-bit array data quality flag indicating any relevant nuances or details related to discrete fluorescence replicates. For full flag details, see the Readme file for this dataset, available in the Supplemental Files section of the related BCO-DMO metadata page.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967815.rdf
Name: Discrete_Phosphate
Units: uM
Description: <p>Average discrete phospate value taken from across replicate values from water sample.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967816.rdf
Name: Discrete_Silicate
Units: uM
Description: <p>Average discrete silicate value taken from across replicate values from water sample.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967817.rdf
Name: Discrete_Nitrate
Units: uM
Description: <p>Average discrete nitrate value taken from across replicate values from water sample.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967818.rdf
Name: Discrete_Nitrite
Units: uM
Description: <p>Average discrete nitrite value taken from across replicate values from water sample.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967819.rdf
Name: Discrete_Ammonium
Units: uM
Description: <p>Average discrete ammonium value taken from across replicate values from water sample.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967820.rdf
Name: Discrete_Nutrients_Flag
Units: unitless
Description: <p>16-bit array data quality flag indicating any relevant nuances or details related to discrete nutrient values. For full flag details, see the Readme file for this dataset, available in the Supplemental Files section of the related BCO-DMO metadata page. Commonly flagged issues include leaking Niskin or open vent (1000).</p>
http://lod.bco-dmo.org/id/dataset-parameter/967821.rdf
Name: Discrete_Nutrients_Replicate_Flag
Units: unitless
Description: <p>flag indicating any relevant nuances or details related to nutrient replicate values. For full flag details, see the Readme file for this dataset, available in the Supplemental Files section of the related BCO-DMO metadata page. If two samples were taken from the same niskin the flag value will be 1000.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967822.rdf
Name: Discrete_Salinity
Units: psu
Description: <p>Discrete salinity taken from water sample.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967823.rdf
Name: Discrete_Salinity_Flag
Units: unitless
Description: <p>16-bit array data quality flag indicating any relevant nuances or details related to Discrete_Salinity. For full flag details, see the Readme file for this dataset, available in the Supplemental Files section of the related BCO-DMO metadata page.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967824.rdf
Name: Discrete_Salinity_Replicate_Flag
Units: unitless
Description: <p>16-bit array data quality flag indicating any relevant nuances or details related to discrete salinity replicates. For full flag details, see the Readme file for this dataset, available in the Supplemental Files section of the related BCO-DMO metadata page.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967825.rdf
Name: Discrete_Alkalinity
Units: umol/kg
Description: <p>Discrete alkalinity value taken from water sample.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967826.rdf
Name: Discrete_Alkalinity_Flag
Units: unitless
Description: <p>16-bit array data quality flag indicating any relevant nuances or details related to Discrete_Alkalinity. For full flag details, see the Readme file for this dataset, available in the Supplemental Files section of the related BCO-DMO metadata page.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967827.rdf
Name: Discrete_Alkalinity_Replicate_Flag
Units: unitless
Description: <p>16-bit array data quality flag indicating any relevant nuances or details related to discrete alkalinity replicates. For full flag details, see the Readme file for this dataset, available in the Supplemental Files section of the related BCO-DMO metadata page.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967828.rdf
Name: Discrete_DIC
Units: umol/kg
Description: <p>Discrete dissolved inorganic carbon (DIC) value from water sample.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967829.rdf
Name: Discrete_DIC_Flag
Units: unitless
Description: <p>16-bit array data quality flag indicating any relevant nuances or details related to Discrete_DIC. For full flag details, see the Readme file for this dataset, available in the Supplemental Files section of the related BCO-DMO metadata page.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967830.rdf
Name: Discrete_DIC_Replicate_Flag
Units: unitless
Description: <p>16-bit array data quality flag indicating any relevant nuances or details related to discrete dissolved inorganic carbon (DIC) replicates. For full flag details, see the Readme file for this dataset, available in the Supplemental Files section of the related BCO-DMO metadata page.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967831.rdf
Name: Discrete_pCO2
Units: uatm
Description: <p>Discrete partial pressure of carbon dioxide (pCO2) taken from water sample. CGSN typically does not measure this parameter.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967832.rdf
Name: pCO2_Analysis_Temp
Units: deg C
Description: <p>Discrete partial pressure of carbon dioxide (pCO2) analysis temperature. CGSN typically does not measure this parameter.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967833.rdf
Name: Discrete_pCO2_Flag
Units: unitless
Description: <p>16-bit array data quality flag indicating any relevant nuances or details related to Discrete_pCO2. For full flag details, see the Readme file for this dataset, available in the Supplemental Files section of the related BCO-DMO metadata page.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967834.rdf
Name: Discrete_pCO2_Replicate_Flag
Units: unitless
Description: <p>16-bit array data quality flag indicating any relevant nuances or details related to discrete pCO2 replicates. For full flag details, see the Readme file for this dataset, available in the Supplemental Files section of the related BCO-DMO metadata page.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967835.rdf
Name: Discrete_pH
Units: unitless
Description: <p>Discrete pH value taken from water sample. Typically not as many pH samples are taken as DIC or Total Alkalinity samples.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967836.rdf
Name: pH_Analysis_Temp
Units: dec C
Description: <p>pH analysis temperature value taken from water sample.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967837.rdf
Name: Discrete_pH_Flag
Units: unitless
Description: <p>16-bit array data quality flag indicating any relevant nuances or details related to Discrete_pH. For full flag details, see the Readme file for this dataset, available in the Supplemental Files section of the related BCO-DMO metadata page.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967838.rdf
Name: Discrete_pH_Replicate_Flag
Units: unitless
Description: <p>16-bit array data quality flag indicating any relevant nuances or details related to discrete pH replicates. For full flag details, see the Readme file for this dataset, available in the Supplemental Files section of the related BCO-DMO metadata page.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967839.rdf
Name: Calculated_Alkalinity
Units: umol/kg
Description: <p>Calculated alkalinity value from water sample.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967840.rdf
Name: Calculated_DIC
Units: umol/kg
Description: <p>Calculated dissolved inorganic carbon (DIC) value from water sample.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967841.rdf
Name: Calculated_pCO2
Units: uatm
Description: <p>Calculated partial pressure of carbon dioxide (pCO2) value from water sample.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967842.rdf
Name: Calculated_pH
Units: unitless
Description: <p>Calculated pH value from water sample.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967843.rdf
Name: Calculated_CO2aq
Units: umol/kg
Description: <p>Calculated carbon dioxide dissolved in an aqueous solution (CO2aq) value from water sample.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967844.rdf
Name: Calculated_Bicarb
Units: umol/kg
Description: <p>Calculated sodium bicarbonate (bicarb) value from water sample.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967845.rdf
Name: Calculated_CO3
Units: umol/kg
Description: <p>Calculated carbon trioxide (CO3) value from water sample.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967846.rdf
Name: Calculated_Omega_C
Units: unitless
Description: <p>Calculated Omega C value from water sample.</p>
http://lod.bco-dmo.org/id/dataset-parameter/967847.rdf
Name: Calculated_Omega_A
Units: unitless
Description: <p>Calculated Omega A value from water sample.</p>
GB/NERC/BODC > British Oceanographic Data Centre, Natural Environment Research Council, United Kingdom
Biological and Chemical Oceanography Data Management Office (BCO-DMO)
Unavailable
508-289-2009
WHOI MS#36
Woods Hole
MA
02543
USA
info@bco-dmo.org
http://www.bco-dmo.org
Monday - Friday 8:00am - 5:00pm
For questions regarding this resource, please contact BCO-DMO via the email address provided.
pointOfContact
2045049
https://darchive.mblwhoilibrary.org/server/api/core/bitstreams/63434f45-ed0c-4a54-bb50-5a81dc7ebd46/content
download
https://doi.org/10.26008/1912/bco-dmo.966896.1
download
onLine
dataset
<p><strong>OOI Coastal Pioneer NES Array Sampling Guidelines</strong></p>
<p>The location of the Coastal Pioneer Array from 2013 through 2022 is the New England Shelf (NES).&nbsp; The Pioneer-NES Array consists of 3 Coastal Surface Moorings, 5-7 Coastal Profiler Moorings (depending on the season), and mobile assets.&nbsp; Coastal Gliders are present in the Array year-round.&nbsp; Coastal Profiling Gliders are present in the Summer at the Inshore and Central sites (they are replaced by Profiler Moorings in the Winter).&nbsp; AUVs are operated in the Array during OOI cruises.</p>
<p>Subsections below define the strategy for sampling in the vicinity of each type of platform.</p>
<p>There are a few general guidelines which also inform the strategies defined below:</p>
<ul>
<li>Collect 4-6 water samples spaced throughout the water column (7 m, bottom, and 2-3 in between).</li>
<li>Depths selected based on water column stratification and/or location of min/max features (e.g., O<sub>2</sub> minimum, Chlorophyll maximum).</li>
<li>Collect Chlorophyll in surface waters down to ~50 m + one deep sample (or where a fluorescence signal is no longer detected).</li>
<li>Collect DIC/TA, pH at 7 m and at the bottom, and DIC/TA at intermediate depths.</li>
</ul>
<p>Coastal Surface Mooring Sampling</p>
<ul>
<li>Collect 4-6 water samples spaced throughout the water column (7 m, bottom, and 2-3 in between).</li>
<li>Depths selected based on water column stratification and/or location of min/max features (e.g., O<sub>2</sub> minimum, Chlorophyll maximum).</li>
<li>Collect Chlorophyll in surface waters down to ~50 m + one deep sample (or where a fluorescence signal is no longer detected).</li>
<li>Collect DIC/TA, pH at 7 m and at the bottom, and DIC/TA at intermediate depths.</li>
</ul>
<p>Coastal Profiler Mooring Sampling</p>
<ul>
<li>Collect 4-6 water samples spaced throughout the water column (7 m, bottom, and 2-3 in between).</li>
<li>Depths selected based on water column stratification and/or location of min/max features (e.g., O<sub>2</sub> minimum, Chlorophyll maximum).</li>
<li>Collect Chlorophyll in surface waters down to ~50 m + one deep sample (no need to sample where a fluorescence signal is no longer detected).</li>
<li>Collect Nutrient and Carbon samples even though not measured on mooring; provides a valuable, consistent dataset across the array.</li>
<li>For carbon measurements – pH is most important at depth and at the surface; DIC/TA is important throughout water column and at depths with nutrient sampling.</li>
<li>If reduction in sampling is needed, consider not sampling Nutrients and Carbon at the upstream sites (UI, UO).</li>
</ul>
<p>Sampling Associated with Mobile Assets</p>
<ul>
<li>Collect 4-5 water samples spaced throughout the water column (surface, bottom, and 2-3 in between)</li>
<li>Depths selected based on water column stratification and/or location of min/max features (e.g., O<sub>2</sub> minimum, Chlorophyll max)</li>
<li>Collect Chlorophyll in surface waters down to ~50 m + one deep sample (no need to sample where a fluorescence signal is no longer detected)</li>
<li>AUVs and Profiling Gliders – sample at 7 m instead of surface, and include nutrient sampling (because these vehicles transit close to Surface Moorings with an NSIF at 7 m).</li>
</ul>
<p><strong>Methods</strong></p>
<p>Salinity</p>
<p>Salinity measurements are performed following the methodology outlined in the WHOI Hydrography Blue Book,&nbsp;<em>Automated Oxygen Titration and Salinity Determination</em>&nbsp;(Knapp et al. 1990). Measurements are performed using a Guildline Autosal model 8400B salinometer (Guildline Instruments of Canada). Manufacturer stated accuracy and precision at 35 psu is +/- 0.003 psu and 0.0002 psu. IAPSO standard seawater is used to standardize the Autosal daily before runs.</p>
<p>Oxygen</p>
<p>Dissolved oxygen measurements are performed following the methodology outlined in the WHOI Hydrography Blue Book Automated Oxygen Titration and Salinity Determination (Knapp et al. 1990). Measurements are performed using a Metrohm Model 888 Titrando dosing device, with the titration endpoint determined amperometrically. Stated accuracy is 0.02 ml/l, with a precision of 0.001 ml/l.</p>
<p>Nutrients</p>
<p>All nutrient values are reported as the average of triplicate analysis on a single collected sample.</p>
<p>Carbon System</p>
<p>Carbon system measurements are performed by the Wang lab (Woods Hole Oceanographic Institution). DIC and TA measurements follow the methodology of Wang and Cai (2004) with uncertainties of 2 umol/kg. DIC measurements are performed with an Apollo Sci-Tech AS-C3. TA measurements are performed with an Apollo Sci-Tech AS-ALK2 and ROSS electrode. pH measurements follow the methodology of Clayton and Byrne (1993) with an uncertainty of 0.002 pH units using an Agilent 8453.</p>
<p>Chlorophyll and Phaeo</p>
<p>Analysis was completed using a Turner Designs Aquafluor Handheld 800446</p>
Specified by the Principal Investigator(s)
<p><strong>File/Row Representation of Water Samples</strong></p>
<p>There should be one row for each station-cast-niskin bottle set. Multiple samples for the same&nbsp;parameter from a single niskin&nbsp;bottle are split into separate rows, with the associated&nbsp;CTD data copied to the new row. The first row of the file is the column headers.</p>
<p><strong>Data Fill Values and Flag Description</strong></p>
<p>The data flags are presented in the summary sheet as a 16-bit array, read from right-to-left, where a 1 in a particular bit position indicates a particular flag meaning applies. For example, a flag of 0000000000000010 for the column **CTD_File_Flag** indicates that the cast was a data cast only.</p>
<p>Additionally, these data flags an assessment of the collection and processing of the relevant data or samples, and are not an assessment of the *accuracy* of the data. For example, a conductivity sensor which has the correct calibration coefficients and functions normally will receive a quality flag of 0000000000000100 (acceptable measurement). However, the calibration coefficients may be out of date and off with respect to the discrete salinity results; this does not affect the assigned flag.</p>
<p>For full details about flag meanings, refer to the Readme files available for download in the Supplemental Files section of this metadata page.&nbsp;</p>
Specified by the Principal Investigator(s)
- Units removed from column header names.
- Spaces in column headers removed and replaced with underscores ("_").
- -9999999 null data values replaced with blank values.
- "Not detected" lab values (e.g. >0.03 and >0.04) replaced with blank values.
- "Bottom Depth at Start Position" estimated values (e.g. <5000 meters) replaced with blank values.
- Corrected values presenting as dates in Discrete_Chlorophyll and Discrete Phaeopigment columns due to Excel coercion.
- Removed blank columns from primary data file.
Specified by BCO-DMO Data Managers
asNeeded
7.x-1.1
Biological and Chemical Oceanography Data Management Office (BCO-DMO)
Unavailable
508-289-2009
WHOI MS#36
Woods Hole
MA
02543
USA
info@bco-dmo.org
http://www.bco-dmo.org
Monday - Friday 8:00am - 5:00pm
For questions regarding this resource, please contact BCO-DMO via the email address provided.
pointOfContact
Apollo Sci-Tech AS-ALK2 and ROSS electrode
Apollo Sci-Tech AS-ALK2 and ROSS electrode
PI Supplied Instrument Name: Apollo Sci-Tech AS-ALK2 and ROSS electrode PI Supplied Instrument Description:Carbon system measurements are performed by the Wang lab (Woods Hole Oceanographic Institution). DIC and TA measurements follow the methodology of Wang and Cai (2004) with uncertainties of 2 umol/kg. DIC measurements are performed with an Apollo Sci-Tech AS-C3. TA measurements are performed with an Apollo Sci-Tech AS-ALK2 and ROSS electrode. pH measurements follow the methodology of Clayton and Byrne (1993) with an uncertainty of 0.002 pH units using an Agilent 8453. Instrument Name: Apollo SciTech AS-ALK2 total alkalinity titrator Instrument Short Name:Apollo SciTech AS-ALK2 Instrument Description: An automated acid-base titrator for use in aquatic carbon dioxide parameter analysis. The titrator provides standardisation and sample analysis, using the Gran titration procedure for alkalinity determination of seawater and brackish waters. It is designed for both shipboard and land based laboratory use. The precision of the instrument is 0.1 percent or higher, and sample volumes may range from 10-25 ml. Titration takes approximately 8 minutes per sample, and the repeatability is within plus or minus 1-2 micromoles per kg.
8400B salinometer (Guildline Instruments of Canada)
8400B salinometer (Guildline Instruments of Canada)
PI Supplied Instrument Name: 8400B salinometer (Guildline Instruments of Canada) PI Supplied Instrument Description:Salinity measurements are performed following the methodology outlined in the WHOI Hydrography Blue Book _Automated Oxygen Titration and Salinity Determination_(Knapp et al. 1990). Measurements are performed using a Guildline Autosal model 8400B salinometer (Guildline Instruments of Canada). Manufacturer stated accuracy and precision at 35 psu is +/- 0.003 psu and 0.0002 psu. IAPSO standard seawater is used to standardize the Autosal daily before runs. Instrument Name: Autosal salinometer Instrument Short Name:salinometer Instrument Description: The salinometer is an instrument for measuring the salinity of a water sample. Community Standard Description: http://vocab.nerc.ac.uk/collection/L05/current/LAB30/
Niskin
Niskin
PI Supplied Instrument Name: Niskin PI Supplied Instrument Description:Niskin bottles on CTD rosette used to collect water samples. Instrument Name: Niskin bottle Instrument Short Name:Niskin bottle Instrument Description: A Niskin bottle (a next generation water sampler based on the Nansen bottle) is a cylindrical, non-metallic water collection device with stoppers at both ends. The bottles can be attached individually on a hydrowire or deployed in 12, 24, or 36 bottle Rosette systems mounted on a frame and combined with a CTD. Niskin bottles are used to collect discrete water samples for a range of measurements including pigments, nutrients, plankton, etc. Community Standard Description: http://vocab.nerc.ac.uk/collection/L22/current/TOOL0412/
SBE 43
SBE 43
PI Supplied Instrument Name: SBE 43 PI Supplied Instrument Description:SBE used to determine CTD oxygen values. Instrument Name: Sea-Bird SBE 43 Dissolved Oxygen Sensor Instrument Short Name:SBE-43 DO Instrument Description: The Sea-Bird SBE 43 dissolved oxygen sensor is a redesign of the Clark polarographic membrane type of dissolved oxygen sensors. more information from Sea-Bird Electronics Community Standard Description: http://vocab.nerc.ac.uk/collection/L22/current/TOOL0036/
Metrohm Model 888 Titrando dosing device
Metrohm Model 888 Titrando dosing device
PI Supplied Instrument Name: Metrohm Model 888 Titrando dosing device PI Supplied Instrument Description:Dissolved oxygen measurements are performed following the methodology outlined in the WHOI Hydrography Blue Book _Automated Oxygen Titration and Salinity Determination_ (Knapp et al. 1990). Measurements are performed using a Metrohm Model 888 Titrando dosing device, with the titration endpoint determined amperometrically. Stated accuracy is 0.02 ml/l, with a precision of 0.001 ml/l. Instrument Name: Titrator Instrument Short Name:Titrator Instrument Description: Titrators are instruments that incrementally add quantified aliquots of a reagent to a sample until the end-point of a chemical reaction is reached. Community Standard Description: http://vocab.nerc.ac.uk/collection/L05/current/LAB12/
WL CSTAR Trans
WL CSTAR Trans
PI Supplied Instrument Name: WL CSTAR Trans PI Supplied Instrument Description:Wet Labs CSTAR Transmissometer was used to determine Beam Attenuation and Beam Transmission values. Instrument Name: WET Labs {Sea-Bird WETLabs} C-Star transmissometer Instrument Short Name:WL CSTAR Trans Instrument Description: The C-Star transmissometer has a novel monolithic housing with a highly intgrated opto-electronic design to provide a low cost, compact solution for underwater measurements of beam transmittance. The C-Star is capable of free space measurements or flow-through sampling when used with a pump and optical flow tubes. The sensor can be used in profiling, moored, or underway applications. Available with a 6000 m depth rating.
More information on Sea-Bird website: https://www.seabird.com/c-star-transmissometer/product?id=60762467717 Community Standard Description: http://vocab.nerc.ac.uk/collection/L22/current/TOOL0160/
Cruise: KN217
KN217
R/V Knorr
Community Standard Description
International Council for the Exploration of the Sea
R/V Knorr
vessel
Cruise: KN222
KN222
R/V Knorr
Community Standard Description
International Council for the Exploration of the Sea
R/V Knorr
vessel
Cruise: KN224
KN224
R/V Knorr
Community Standard Description
International Council for the Exploration of the Sea
R/V Knorr
vessel
Cruise: AT27
AT27
R/V Atlantis
Community Standard Description
International Council for the Exploration of the Sea
R/V Atlantis
vessel
Cruise: AT31A
AT31A
R/V Atlantis
Community Standard Description
International Council for the Exploration of the Sea
R/V Atlantis
vessel
Cruise: AR4A
AR4A
International Council for the Exploration of the Sea
R/V Neil Armstrong
vessel
Cruise: AR8A
AR8A
International Council for the Exploration of the Sea
R/V Neil Armstrong
vessel
Cruise: AR18A
AR18A
International Council for the Exploration of the Sea
R/V Neil Armstrong
vessel
Cruise: AR24A
AR24A
International Council for the Exploration of the Sea
R/V Neil Armstrong
vessel
Cruise: AR28A
AR28A
International Council for the Exploration of the Sea
R/V Neil Armstrong
vessel
Cruise: AR34A
AR34A
International Council for the Exploration of the Sea
R/V Neil Armstrong
vessel
Cruise: AR39A
AR39A
International Council for the Exploration of the Sea
R/V Neil Armstrong
vessel
Cruise: AR44
AR44
International Council for the Exploration of the Sea
R/V Neil Armstrong
vessel
Cruise: AR48
AR48
International Council for the Exploration of the Sea
R/V Neil Armstrong
vessel
Cruise: AR52A
AR52A
International Council for the Exploration of the Sea
R/V Neil Armstrong
vessel
Cruise: AR61A
AR61A
International Council for the Exploration of the Sea
R/V Neil Armstrong
vessel
Cruise: AR66A
AR66A
International Council for the Exploration of the Sea
R/V Neil Armstrong
vessel
AR66A
Albert Plueddemann
Woods Hole Oceanographic Institution
Cruise: AR70A
AR70A
International Council for the Exploration of the Sea
R/V Neil Armstrong
vessel
Cruise: AT31B
AT31B
R/V Atlantis
Community Standard Description
International Council for the Exploration of the Sea
R/V Atlantis
vessel
Cruise: AT31C
AT31C
R/V Atlantis
Community Standard Description
International Council for the Exploration of the Sea
R/V Atlantis
vessel
Cruise: AR4B
AR4B
International Council for the Exploration of the Sea
R/V Neil Armstrong
vessel
Cruise: AR4C
AR4C
International Council for the Exploration of the Sea
R/V Neil Armstrong
vessel
Cruise: AR8B
AR8B
International Council for the Exploration of the Sea
R/V Neil Armstrong
vessel
Cruise: AR18B
AR18B
International Council for the Exploration of the Sea
R/V Neil Armstrong
vessel
Cruise: AR18C
AR18C
International Council for the Exploration of the Sea
R/V Neil Armstrong
vessel
Cruise: AR24B
AR24B
International Council for the Exploration of the Sea
R/V Neil Armstrong
vessel
Cruise: AR24C
AR24C
International Council for the Exploration of the Sea
R/V Neil Armstrong
vessel
Cruise: AR28B
AR28B
International Council for the Exploration of the Sea
R/V Neil Armstrong
vessel
Cruise: AR31A
AR31A
International Council for the Exploration of the Sea
R/V Neil Armstrong
vessel
Cruise: AR31B
AR31B
International Council for the Exploration of the Sea
R/V Neil Armstrong
vessel
Cruise: AR31C
AR31C
International Council for the Exploration of the Sea
R/V Neil Armstrong
vessel
Cruise: AR34B
AR34B
International Council for the Exploration of the Sea
R/V Neil Armstrong
vessel
Cruise: AR39B
AR39B
International Council for the Exploration of the Sea
R/V Neil Armstrong
vessel
Cruise: AR52B
AR52B
International Council for the Exploration of the Sea
R/V Neil Armstrong
vessel
Cruise: AR61B
AR61B
International Council for the Exploration of the Sea
R/V Neil Armstrong
vessel
Cruise: AR66B
AR66B
International Council for the Exploration of the Sea
R/V Neil Armstrong
vessel
Cruise: AR70B
AR70B
International Council for the Exploration of the Sea
R/V Neil Armstrong
vessel
R/V Knorr
Community Standard Description
International Council for the Exploration of the Sea
R/V Knorr
vessel
R/V Atlantis
Community Standard Description
International Council for the Exploration of the Sea
R/V Atlantis
vessel
International Council for the Exploration of the Sea
R/V Neil Armstrong
vessel