Ta_err |
Tantalum combined sampling and analytical error
|
ug/m^3 |
no_bcodmo_term |
Cr |
concentration of chromium
|
ug/m^3 |
no_bcodmo_term |
Ta |
concentration of tantalum
|
ug/m^3 |
no_bcodmo_term |
Cr_err |
Chromium combined sampling and analytical error
|
ug/m^3 |
no_bcodmo_term |
Lu_err |
Lutetium combined sampling and analytical error
|
ug/m^3 |
no_bcodmo_term |
Cs |
concentration of cesium
|
ug/m^3 |
no_bcodmo_term |
Tb |
concentration of terbium
|
ug/m^3 |
no_bcodmo_term |
Nd_err |
Neodymium combined sampling and analytical error
|
ug/m^3 |
no_bcodmo_term |
Tb_err |
Terbium combined sampling and analytical error
|
ug/m^3 |
no_bcodmo_term |
Eu |
concentration of europium
|
ug/m^3 |
no_bcodmo_term |
Th |
concentration of thorium
|
ug/m^3 |
no_bcodmo_term |
Cs_err |
Cesium combined sampling and analytical error
|
ug/m^3 |
no_bcodmo_term |
Fe |
concentration of iron
|
ug/m^3 |
no_bcodmo_term |
Tm |
concentration of thulium
|
ug/m^3 |
no_bcodmo_term |
Rb_err |
Rubidium combined sampling and analytical error
|
ug/m^3 |
no_bcodmo_term |
Th_err |
Thorium combined sampling and analytical error
|
ug/m^3 |
no_bcodmo_term |
Gd |
concentration of gadolinium
|
ug/m^3 |
no_bcodmo_term |
U |
concentration of uranium
|
ug/m^3 |
no_bcodmo_term |
Eu_err |
Europium combined sampling and analytical error
|
ug/m^3 |
no_bcodmo_term |
Hf |
concentration of hafnium
|
ug/m^3 |
no_bcodmo_term |
Yb |
concentration of ytterbium
|
ug/m^3 |
no_bcodmo_term |
Sb_err |
Antimony combined sampling and analytical error
|
ug/m^3 |
no_bcodmo_term |
Tm_err |
Thulium combined sampling and analytical error
|
ug/m^3 |
no_bcodmo_term |
Hg |
concentration of mercury
|
ug/m^3 |
no_bcodmo_term |
Zn |
concentration of zinc
|
ug/m^3 |
no_bcodmo_term |
Fe_err |
Iron combined sampling and analytical error
|
ug/m^3 |
no_bcodmo_term |
La |
concentration of lanthanum
|
ug/m^3 |
no_bcodmo_term |
dust |
total sample mass estimated by assuming the Al content represented 8 percent, based on an 8% crustal average for Al
|
ug/m^3 |
no_bcodmo_term |
Sc_err |
Scandium combined sampling and analytical error
|
ug/m^3 |
no_bcodmo_term |
U_err |
Uranium combined sampling and analytical error
|
ug/m^3 |
no_bcodmo_term |
Lu |
concentration of lutetium
|
ug/m^3 |
no_bcodmo_term |
As_err |
Arsenic combined sampling and analytical error
|
ug/m^3 |
no_bcodmo_term |
Gd_err |
Gadolinium combined sampling and analytical error
|
ug/m^3 |
no_bcodmo_term |
Nd |
concentration of neodymium
|
ug/m^3 |
no_bcodmo_term |
Se_err |
Selenium combined sampling and analytical error
|
ug/m^3 |
no_bcodmo_term |
Yb_err |
Ytterbium combined sampling and analytical error
|
ug/m^3 |
no_bcodmo_term |
Rb |
concentration of rubidium
|
ug/m^3 |
no_bcodmo_term |
Br_err |
Bromine combined sampling and analytical error
|
ug/m^3 |
no_bcodmo_term |
Hf_err |
Hafnium combined sampling and analytical error
|
ug/m^3 |
no_bcodmo_term |
Sb |
concentration of antimony
|
ug/m^3 |
no_bcodmo_term |
Sm_err |
Samarium combined sampling and analytical error
|
ug/m^3 |
no_bcodmo_term |
Zn_err |
Zinc combined sampling and analytical error
|
ug/m^3 |
no_bcodmo_term |
As |
concentration of arsenic
|
ug/m^3 |
As |
Sc |
concentration of scandium
|
ug/m^3 |
no_bcodmo_term |
Ce_err |
Cerium combined sampling and analytical error
|
ug/m^3 |
no_bcodmo_term |
Hg_err |
Mercury combined sampling and analytical error
|
ug/m^3 |
no_bcodmo_term |
Br |
concentration of bromine
|
ug/m^3 |
no_bcodmo_term |
Se |
concentration of selenium
|
ug/m^3 |
no_bcodmo_term |
Sr_err |
Strontium combined sampling and analytical error
|
ug/m^3 |
no_bcodmo_term |
Ce |
concentration of cerium
|
ug/m^3 |
no_bcodmo_term |
Sm |
concentration of samarium
|
ug/m^3 |
no_bcodmo_term |
Co_err |
Cobalt combined sampling and analytical error
|
ug/m^3 |
no_bcodmo_term |
La_err |
Lanthanum combined sampling and analytical error
|
ug/m^3 |
no_bcodmo_term |
Co |
concentration of cobolt
|
ug/m^3 |
no_bcodmo_term |
Sr |
concentration of strontium
|
ug/m^3 |
no_bcodmo_term |
lat_n |
Nominal latitude (minus indicates South)
|
decimal degrees |
no_bcodmo_term |
lon_n |
Nominal longitude (minus indicates West)
|
decimal degrees |
no_bcodmo_term |
vol_pump |
volume of air pumped to accumulate sample
|
cubic meters |
no_bcodmo_term |
date_begin |
date sampling pump turned on for a given sample,
|
as YYYYMMDD |
no_bcodmo_term |
Ta_dl |
Tantalum detection level:
a '1' indicates that while a peak was detected,
the isotope sample was below the level of detection relative
to background "noise". The element concentration reported
therefore represents the amount of the isotope which would
have had to have been present for it to have been detected.
a '0' indicates no flag - concentration is as measured.
|
|
no_bcodmo_term |
Cr_dl |
Chromium detection level:
a '1' indicates that while a peak was detected,
the isotope sample was below the level of detection relative
to background "noise". The element concentration reported
therefore represents the amount of the isotope which would
have had to have been present for it to have been detected.
a '0' indicates no flag - concentration is as measured.
|
|
no_bcodmo_term |
Lu_dl |
Lutetium detection level:
a '1' indicates that while a peak was detected,
the isotope sample was below the level of detection relative
to background "noise". The element concentration reported
therefore represents the amount of the isotope which would
have had to have been present for it to have been detected.
a '0' indicates no flag - concentration is as measured.
|
|
no_bcodmo_term |
Nd_dl |
Neodymium detection level:
a '1' indicates that while a peak was detected,
the isotope sample was below the level of detection relative
to background "noise". The element concentration reported
therefore represents the amount of the isotope which would
have had to have been present for it to have been detected.
a '0' indicates no flag - concentration is as measured.
|
|
no_bcodmo_term |
Tb_dl |
Terbium detection level:
a '1' indicates that while a peak was detected,
the isotope sample was below the level of detection relative
to background "noise". The element concentration reported
therefore represents the amount of the isotope which would
have had to have been present for it to have been detected.
a '0' indicates no flag - concentration is as measured.
|
|
no_bcodmo_term |
Cs_dl |
Cesium detection level:
a '1' indicates that while a peak was detected,
the isotope sample was below the level of detection relative
to background "noise". The element concentration reported
therefore represents the amount of the isotope which would
have had to have been present for it to have been detected.
a '0' indicates no flag - concentration is as measured.
|
|
no_bcodmo_term |
Rb_dl |
Rubidium detection level:
a '1' indicates that while a peak was detected,
the isotope sample was below the level of detection relative
to background "noise". The element concentration reported
therefore represents the amount of the isotope which would
have had to have been present for it to have been detected.
a '0' indicates no flag - concentration is as measured.
|
|
no_bcodmo_term |
Th_dl |
Thorium detection level:
a '1' indicates that while a peak was detected,
the isotope sample was below the level of detection relative
to background "noise". The element concentration reported
therefore represents the amount of the isotope which would
have had to have been present for it to have been detected.
a '0' indicates no flag - concentration is as measured.
|
|
no_bcodmo_term |
cruise |
Arabian Sea, Thomas Thompson cruise identifier
|
|
no_bcodmo_term |
Eu_dl |
Europium detection level:
a '1' indicates that while a peak was detected,
the isotope sample was below the level of detection relative
to background "noise". The element concentration reported
therefore represents the amount of the isotope which would
have had to have been present for it to have been detected.
a '0' indicates no flag - concentration is as measured.
|
|
no_bcodmo_term |
Sb_dl |
Antimony detection level:
a '1' indicates that while a peak was detected,
the isotope sample was below the level of detection relative
to background "noise". The element concentration reported
therefore represents the amount of the isotope which would
have had to have been present for it to have been detected.
a '0' indicates no flag - concentration is as measured.
|
|
no_bcodmo_term |
Tm_dl |
Thulium detection level:
a '1' indicates that while a peak was detected,
the isotope sample was below the level of detection relative
to background "noise". The element concentration reported
therefore represents the amount of the isotope which would
have had to have been present for it to have been detected.
a '0' indicates no flag - concentration is as measured.
|
|
no_bcodmo_term |
date_end |
date sampling pump turned off for a given sample, as YYYYMMDD
|
|
no_bcodmo_term |
Fe_dl |
Iron detection level:
a '1' indicates that while a peak was detected,
the isotope sample was below the level of detection relative
to background "noise". The element concentration reported
therefore represents the amount of the isotope which would
have had to have been present for it to have been detected.
a '0' indicates no flag - concentration is as measured.
|
|
no_bcodmo_term |
yrday |
day of year, 1995
|
|
no_bcodmo_term |
Sc_dl |
Scandium detection level:
a '1' indicates that while a peak was detected,
the isotope sample was below the level of detection relative
to background "noise". The element concentration reported
therefore represents the amount of the isotope which would
have had to have been present for it to have been detected.
a '0' indicates no flag - concentration is as measured.
|
|
no_bcodmo_term |
U_dl |
Uranium detection level:
a '1' indicates that while a peak was detected,
the isotope sample was below the level of detection relative
to background "noise". The element concentration reported
therefore represents the amount of the isotope which would
have had to have been present for it to have been detected.
a '0' indicates no flag - concentration is as measured.
|
|
no_bcodmo_term |
As_dl |
Arsenic detection level:
a '1' indicates that while a peak was detected,
the isotope sample was below the level of detection relative
to background "noise". The element concentration reported
therefore represents the amount of the isotope which would
have had to have been present for it to have been detected.
a '0' indicates no flag - concentration is as measured.
|
|
no_bcodmo_term |
Gd_dl |
Gadolinium detection level:
a '1' indicates that while a peak was detected,
the isotope sample was below the level of detection relative
to background "noise". The element concentration reported
therefore represents the amount of the isotope which would
have had to have been present for it to have been detected.
a '0' indicates no flag - concentration is as measured.
|
|
no_bcodmo_term |
Se_dl |
Selenium detection level:
a '1' indicates that while a peak was detected,
the isotope sample was below the level of detection relative
to background "noise". The element concentration reported
therefore represents the amount of the isotope which would
have had to have been present for it to have been detected.
a '0' indicates no flag - concentration is as measured.
|
|
no_bcodmo_term |
Yb_dl |
Ytterbium detection level:
a '1' indicates that while a peak was detected,
the isotope sample was below the level of detection relative
to background "noise". The element concentration reported
therefore represents the amount of the isotope which would
have had to have been present for it to have been detected.
a '0' indicates no flag - concentration is as measured.
|
|
no_bcodmo_term |
Br_dl |
Bromine detection level:
a '1' indicates that while a peak was detected,
the isotope sample was below the level of detection relative
to background "noise". The element concentration reported
therefore represents the amount of the isotope which would
have had to have been present for it to have been detected.
a '0' indicates no flag - concentration is as measured.
|
|
no_bcodmo_term |
Hf_dl |
Hafnium detection level:
a '1' indicates that while a peak was detected,
the isotope sample was below the level of detection relative
to background "noise". The element concentration reported
therefore represents the amount of the isotope which would
have had to have been present for it to have been detected.
a '0' indicates no flag - concentration is as measured.
|
|
no_bcodmo_term |
Sm_dl |
Samarium detection level:
a '1' indicates that while a peak was detected,
the isotope sample was below the level of detection relative
to background "noise". The element concentration reported
therefore represents the amount of the isotope which would
have had to have been present for it to have been detected.
a '0' indicates no flag - concentration is as measured.
|
|
no_bcodmo_term |
Zn_dl |
Zinc detection level:
a '1' indicates that while a peak was detected,
the isotope sample was below the level of detection relative
to background "noise". The element concentration reported
therefore represents the amount of the isotope which would
have had to have been present for it to have been detected.
a '0' indicates no flag - concentration is as measured.
|
|
no_bcodmo_term |
Ce_dl |
Cerium detection level:
a '1' indicates that while a peak was detected,
the isotope sample was below the level of detection relative
to background "noise". The element concentration reported
therefore represents the amount of the isotope which would
have had to have been present for it to have been detected.
a '0' indicates no flag - concentration is as measured.
|
|
no_bcodmo_term |
Hg_dl |
Mercury detection level:
a '1' indicates that while a peak was detected,
the isotope sample was below the level of detection relative
to background "noise". The element concentration reported
therefore represents the amount of the isotope which would
have had to have been present for it to have been detected.
a '0' indicates no flag - concentration is as measured.
|
|
no_bcodmo_term |
Sr_dl |
Strontium detection level:
a '1' indicates that while a peak was detected,
the isotope sample was below the level of detection relative
to background "noise". The element concentration reported
therefore represents the amount of the isotope which would
have had to have been present for it to have been detected.
a '0' indicates no flag - concentration is as measured.
|
|
no_bcodmo_term |
Co_dl |
Cobalt detection level:
a '1' indicates that while a peak was detected,
the isotope sample was below the level of detection relative
to background "noise". The element concentration reported
therefore represents the amount of the isotope which would
have had to have been present for it to have been detected.
a '0' indicates no flag - concentration is as measured.
|
|
no_bcodmo_term |
La_dl |
Lanthanum detection level:
a '1' indicates that while a peak was detected,
the isotope sample was below the level of detection relative
to background "noise". The element concentration reported
therefore represents the amount of the isotope which would
have had to have been present for it to have been detected.
a '0' indicates no flag - concentration is as measured.
|
|
no_bcodmo_term |