| Contributors | Affiliation | Role |
|---|---|---|
| Ohman, Mark D. | University of California-San Diego Scripps (UCSD-SIO) | Principal Investigator, Contact |
| Ellen, Jeffrey S. | Naval Information Warfare Center Pacific (NIWC Pacific) | Scientist |
| Gastauer, Sven | Thünen Institute of Sea Fisheries (TI-SF) | Scientist |
| Soenen, Karen | Woods Hole Oceanographic Institution (WHOI BCO-DMO) | BCO-DMO Data Manager |
This dataset is part of a larger collaborative study called BIOSWOT-Med in the Northwestern Mediterranean Sea. The Scripps Zooglider was deployed in collaboration with a French-led team aboard the R/V L'Atalante from March to May 2023.
Data from the Zooglider mission include: CTD, Zonar, Particle counts from Zoocam images and Zooglider dive record data (see related datasets).
Data were acquired in 351 Zooglider dive profiles in the Northwestern Mediterranean, usually from approximately 420 m depth to the sea surface. These dives are numbered 1-314 and 353-389. The intervening numbers (315-353) refer to time periods when the Zooglider was in transit onboard R/V L’Atalante, during which time no in situ data were acquired. CTD and Chl-a fluorometer data were recorded on all dives when Zooglider was immersed.
Zooglider was moving at approximately 15 cm s-1 horizontally and 10 cm s-1 vertically while sampling, at an average angle of 16-18° off the horizontal. All sampling was done only on the Zooglider ascents. During descents, ultraviolet LEDs were powered intermittently and wipers activated to remove any biofouling materials on the optical surfaces.
CTD and fluorometer measurements were recorded at 8 second intervals during ascent.
Sampling details may be found in Ohman et al. (2019). The parallel BIOSWOT-Med sampling program aboard the French research vessel L’Atalante, including other autonomous instruments is described in Doglioli and Gérald. (2023) (see related publications).
Temperature, salinity, sigma-theta, and Chl-a fluorescence were averaged in 1-m depth bins as described in Ohman et al. (2019).
* Standardized time variable
* Added ISO_DateTime variable to dataset by merging date & time parameters
| Parameter | Description | Units |
| Dive_number | Sequence of Zooglider dives | unitless |
| latitude_mid_ascent_75 | Latitude of mid-point of dive during ascent, north is positive | decimal degrees |
| longitude_mid_ascent_75 | Longitude of mid-point of dive during ascent, east is positive | decimal degrees |
| Date_UTC | Date of sampling (UTC timezone, ISO format) | unitless |
| Time_UTC | Time of sampling (UTC timezone, ISO format) | unitless |
| Pressure | Pressure below the sea surface | decibars |
| Temperature | Temperature | degrees Celsius (° C) |
| Salinity | Salinity | unitless |
| Density | Water density | kg/m3 |
| Chla_fluorescence | In vivo fluorescence of Chlorophyll-a | counts |
| Dataset-specific Instrument Name | SeaBird CP41 |
| Generic Instrument Name | CTD Sea-Bird 41 |
| Dataset-specific Description | SeaBird CP41 pumped CTD, calibrated against an independently calibrated CTD. |
| Generic Instrument Description | The Sea-Bird SBE 41 CTD module was originally developed in 1997 for integration with sub-surface oceanographic floats. It uses MicroCAT Temperature, Conductivity, and Pressure sensors. |
| Dataset-specific Instrument Name | Seapoint mini-SCF Chlorophyll-a fluorometer |
| Generic Instrument Name | Fluorometer |
| Dataset-specific Description | Seapoint mini-SCF Chlorophyll-a fluorometer, calibrated against pure Chl-a extracts and seawater from the Scripps pier. |
| Generic Instrument Description | A fluorometer or fluorimeter is a device used to measure parameters of fluorescence: its intensity and wavelength distribution of emission spectrum after excitation by a certain spectrum of light. The instrument is designed to measure the amount of stimulated electromagnetic radiation produced by pulses of electromagnetic radiation emitted into a water sample or in situ. |
| Dataset-specific Instrument Name | |
| Generic Instrument Name | Zooglider |
| Dataset-specific Description | Zooglider, designed and built at the Scripps Institution of Oceanography, as described in Ohman et al. (2019. Limnology and Oceanography-Methods 17: 69-86 doi 10.1002/lom3.10301). It is based on a Spray glider hull (Sherman et al. 2002. IEEE Journal of Oceanic Engineering 26: 437-446 doi 10.1109/48.972076), modified with custom optical and acoustic sampling instruments. |
| Generic Instrument Description | Zooglider, designed and built at the Scripps Institution of Oceanography, as described in Ohman et al. (2019. Limnology and Oceanography-Methods 17: 69-86 doi 10.1002/lom3.10301). It is based on a Spray glider hull (Sherman et al. 2002. IEEE Journal of Oceanic Engineering 26: 437-446 doi 10.1109/48.972076), modified with custom optical and acoustic sampling instruments.
|
| Website | |
| Platform | R/V L'Atalante |
| Start Date | 2023-04-21 |
| End Date | 2023-05-15 |
| Description | French-led BIOSWOT-Med study in the Northwestern Mediterranean Sea in Spring 2023. This study was one of the Adopt-a-Crossover field studies carried out around the world in synchrony with the launch by NASA/CNES of the new SWOT satellite for enhanced ocean altimetry. |
NSF Award Abstract:
Ocean fronts are regions of sharp horizontal discontinuities that can alter phytoplankton growth rates and community composition, zooplankton distributions and grazing activity, and predator foraging success. This study is using Zooglider, an autonomous ocean sampler equipped with a range of sensors and capitalizing on a unique opportunity to investigate frontal gradients and plankton communities in the western Mediterranean Sea. It is timed to coincide with a rapid crossover phase of a new NASA satellite mission. The combination of satellite and field-collected data will provide high resolution of the bio-physical consequences of oceanic frontal processes. The project incorporates training for graduate and undergraduate students as well as public outreach. Results are broadly communicated by partnering with a major public aquarium that serves 450,000 visitors per year, including by exhibiting novel porcelain ‘Zooware’ meant to convey the sensory experience of exploring the ocean’s planktonic fauna.
This project focuses on advancing understanding of frontal processes in the western Mediterranean Sea, at a ‘crossover’ site where NASA’s new Surface Water Ocean Topography (SWOT) satellite is making high-frequency sea surface height measurements using a high-resolution sensor. Measurements from the SWOT satellite are resolving small changes in sea-surface height, making it possible to follow the development and temporal progression of ocean frontal systems. The investigator is assessing the consequences of these frontal systems by testing the hypotheses that 1) zooplankton, marine snow particles, and predators are altered in these ocean frontal regions with a size-dependent or trait-dependent response; 2) particle-grazing zooplankton are more closely associated with layers of marine snow than with layers of living phytoplankton; 3) vertical thin layers of zooplankton are more likely to form in frontal than non-frontal regions; and 4) higher predators such as zooplanktivorous fish and marine mammals are more detectable in frontal regions The project makes use of an autonomous ocean instrument, the Zooglider. It includes a shadowgraph imaging Zoocam for resolving zooplankton and marine snow; a dual frequency Zonar to resolve mesozooplankton and larger sources of acoustic backscatter; and a sensitive hydrophone for recording ambient sounds, especially from marine mammals and fishes. These autonomous measurements are coordinated with complementary measurements from a ship-based sampling program, other autonomous vehicles, and satellite remote sensing.
| Funding Source | Award |
|---|---|
| NSF Division of Ocean Sciences (NSF OCE) |