Dataset: SECM_nutrients_all

The CTD data were collected with a Sea-Bird1 SBE 19 Seacat profiler to 200 m or within 10 m of the bottom. Surface (3-m) temperature and salinity data were collected at 1-minute intervals with an onboard thermosalinograph (Sea-Bird SBE 21).

Surface (bucket) and 20-m (Niskin bottle) water samples were taken once at each station for later nutrient and chlorophyll analysis.

To quantify ambient light levels, light intensities (W * m-2) were recorded at each station with a Li-Cor Model 189 radiometer.

To quantify relative water clarity, the CTD was used in lieu of a Secchi disk; depth measurements (m) were made by observing the visual disappearance of the CTD following deployment.

One shallow vertical haul (20-m) was made at each station (except three at ABM) with a 50-cm, 243-micron mesh NORPAC net.

One deep vertical haul (to 200 m or within 10 m of bottom) was made at ABM and the Icy Point stations with a 57-cm, 202-micron mesh WP-2 net.

One double oblique bongo haul was made at stations along the Icy Strait and Lower Clarence Strait transects and at ABM to a depth of 200 m or within 20 m of the bottom, using a 60-cm diameter tandem frame with 505-micron and 333-micron mesh nets. A VEMCO ML-08-TDR time-depth recorder was used with the oblique bongo hauls to record the maximum sampling depth of each haul. General Oceanics model 2031 or Rigosha flow meters were placed inside the bongo and deep conical nets for calculation of filtered water volumes.

Also see related SECM datasets:
station data
ctd
zooplankton
fish catch data
fish length and stomach contents

Station Codes: