Dataset: Cannon_2013_T1: Collection and locality information

Name: Collection and locality information by taxon of Hemichordata from global sites, Table 1, Cannon et al (2013) Biol. Bull. (Antarctic Inverts project)
Published: 2016-12-29
Keywords: biota, oceans

Cite This Dataset

Spatial Extent: N:69.1085 E:33.1058 S:-76.3412 W:-176.9877

Temporal Extent: 2001 - 2013

Project:

Genetic connectivity and biogeographic patterns of Antarctic benthic invertebrates (Antarctic Inverts)

Principal Investigator:

Kenneth M. Halanych (Auburn University)

Co-Principal Investigator:

Andrew Mahon (Central Michigan University)

BCO-DMO Data Manager:

Nancy Copley (Woods Hole Oceanographic Institution, WHOI BCO-DMO)

Version:

Version Date:

2016-12-29

Restricted:

Validated:

Current State:

Preliminary and in progress

Data URL:

https://www.bco-dmo.org/dataset/671215/data

Collection and locality information by taxon of Hemichordata from global sites, Table 1, Cannon et al (2013) Biol. Bull. (Antarctic Inverts project)

Abstract:

This dataset was published as Table 1 from Cannon et al (2013). It contains collection and locality information by taxon of hemichordate specimens collected globally from 2001 to 2013.

Expand/Collapse All

Acquisition Description

Eleven specimens sequenced in this study were collected in September 2011 during Senckenberg’s German Center for Marine Biodiversity Research (DZMB) IceAGE expedition led by Dr. Saskia Brix aboard the R/V Meteor, which circled Iceland, crossing the Mid-Atlantic and Greenland-Scotland ridges. Cephalodiscus specimens were collected during two research expeditions to the Antarctic Peninsula aboard the R/V Lawrence M. Gould in 2001 and 2004. Antarctic enteropneusts were collected in January-February 2013 in the Amundsen and Ross Seas by the R/V Nathaniel B. Palmer. Enteropneusts from Norway were collected on the R/V Håkon Mosby or R/V Aurelia with the aid of Dr. Christiane Todt and the late Dr. Christoffer Schander. Balanoglossus sp. specimens from Mississippi were collected with the assistance of Dr. Richard Heard. Dr. Jon Norenburg and Dr. Darryl Felder provided material from Rhabdopleura sp. collected in the Gulf of Mexico on the R/V Pelican. Specimens were collected at depths ranging from the intertidal to over 2500 m, using diverse sampling methods (Table 1). Enteropneusts from Iceland were collected by decanting sediment through a 1-1.5-mm sieve, and were retained on either a 500- or 300-um sieve; enteropneusts from Antarctica and off Oregon were decanted from sediment directly onto a 250-um sieve. Freshly collected worms were preserved in 95%-100% ethanol, and when multiple specimens were available, voucher specimens were relaxed in 7.5% magnesium chloride and fixed in 4%-10% formalin for morphological studies.

Processing Description

BCO-DMO Processing notes:
- added conventional header with dataset name, PI name, version date
- modified parameter names to conform with BCO-DMO naming conventions
- removed trailing blank spaces
- converted lat and lon to decimal degrees
- added cruise_id column

More Information about this dataset

Funding Sources

Funding Source	Award Number
NSF Office of Polar Programs (formerly NSF PLR)	PLR-1043745
NSF Office of Polar Programs (formerly NSF PLR)	PLR-1043670

Deployments

Deployment	Start Date	Platform	Investigator
Halanych_lab_2011-16	2011-08-01	Auburn University lab	Kenneth M. Halanych (Principal Investigator)	data info
LMG0102	2001-02-20	ARSV Laurence M. Gould	Craig R. Smith (Chief Scientist)	data info
LMG0414	2004-11-25	ARSV Laurence M. Gould	Dr Patricia Kremer (Chief Scientist)	data info
M85-3		R/V Meteor		data info
NBP1210	2013-01-06	RVIB Nathaniel B. Palmer	Kenneth M. Halanych (Chief Scientist)	data info

Instruments

Beam Trawl

Supplied Name: Blake or Agassiz trawl

Supplied Description:

A modified Beam Trawl. USAP Standard 5-ft. net, robust net and frame system good for exploratory fishing. Qualitative sampling device used to sample large numbers of the megabenthos and benthopelagic fauna It is a double sided trawl adapted from the fishing gear of coastal fishermen. Named after the American naturalist Alexander Agassiz. Also called the Blake trawl or Sigsbee trawl (the name of the ship used by Alexander Agassiz and the captain of that ship respectively). from https://www.isa.org.jm/agassiz-trawl

Instrument Type

Generic Name: Beam Trawl

Acronym: Beam trawl

Community Identifier: http://vocab.nerc.ac.uk/collection/L05/current/24/

Generic Description:

A beam trawl consists of a cone-shaped body ending in a bag or codend, which retains the catch. In these trawls the horizontal opening of the net is provided by a beam, made of wood or metal, which is up to 12 m long. The vertical opening is provided by two hoop-like trawl shoes mostly made from steel. No hydrodynamic forces are needed to keep a beam trawl open. The beam trawl is normally towed on outriggers, one trawl on each side.

While fishing for flatfish the beam trawl is often equipped with tickler chains to disturb the fish from the seabed. For operations on very rough fishing grounds they can be equipped with chain matrices. Chain matrices are rigged between the beam and the groundrope and prevent boulders/stones from being caught by the trawl. Shrimp beam trawls are not so heavy and have smaller mesh sizes. A bobbin of groundrope with rubber bobbins keeps the shrimp beam trawl in contact with the bottom and gives flatfish the opportunity to escape.

Close bottom contact is necessary for successful operation. To avoid bycatch of most juvenile fishes selectivity devices are assembled (sieve nets, sorting grids, escape holes). While targeting flatfish the beam trawls are towed up to seven knots, therefore the gear is very heavy; the largest gears weighs up to 10 ton. The towing speed for shrimp is between 2.5 and 3 knots.

(from: http://www.fao.org/fishery/geartype/305/en)

Bottom Sediment Grab Samplers

Supplied Name: SmithMac Grab

Supplied Description:

Instrument Type

Generic Name: Bottom Sediment Grab Samplers

Acronym: BSGS

Community Identifier: http://vocab.nerc.ac.uk/collection/L05/current/50/

Generic Description:

These samplers are designed to collect an accurate representative sample of the sediment bottom. The bite of the sampler should be deep enough so all depths are sampled equally. The closing mechanism is required to completely close and hold the sample as well as prevent wash-out during retrieval. Likewise, during descent the sampler should be designed to minimize disturbance of the topmost sediment by the pressure wave as it is lowered to the bottom.

Box Corer

Supplied Name: MegaCore and Box Core

Supplied Description:

Instrument Type

Generic Name: Box Corer

Community Identifier: http://vocab.nerc.ac.uk/collection/L05/current/51/

Generic Description:

General description of a box corer:

A box corer is a marine geological tool that recovers undisturbed soft surface sediments. It is designed for minimum disturbance of the sediment surface by bow wave effects. Traditionally, it consists of a weighted stem fitted to a square sampling box. The corer is lowered vertically until it impacts with the seabed. At this point the instrument is triggered by a trip as the main coring stem passes through its frame. While pulling the corer out of the sediment a spade swings underneath the sample to prevent loss. When hauled back on board, the spade is under the box. (definition from the SeaVox Device Catalog)

Box corers are one of the simplest and most commonly used types of sediment corers. The stainless steel sampling box can contain a surface sediment block as large as 50cm x 50cm x 75cm with negligible disturbance. Once the sediment is recovered onboard, the sediment box can be detached from the frame and taken to a laboratory for subsampling and further analysis. The core sample size is controlled by the speed at which the corer is lowered into the ocean bottom. When the bottom is firm, a higher speed is required to obtain a complete sample. A depth pinger or other depth indicator is generally used to determine when the box is completely filled with sediment. Once the core box is filled with sediment, the sample is secured by moving the spade-closing lever arm to lower the cutting edge of the spade into the sediment, until the spade completely covers the bottom of the sediment box. (definition from Woods Hole Oceanographic Institution).

Epibenthic Sled

Supplied Name:

Supplied Description:

Instrument Type

Generic Name: Epibenthic Sled

Community Identifier: http://vocab.nerc.ac.uk/collection/L05/current/24/

Generic Description:

An epibenthic sled is a semi-quantitative bottom-sampling device designed to trawl just above the bottom at the sediment water interface (the epibenthic zone). The sled consists of a rectangular steel frame with a mesh net (often more than one) attached to it. Towed along the ocean floor, its weight scrapes into the benthos, collecting any organisms on the surface or in the first few centimeters of sediment. It also collects the organisms in the water column just above the benthos.

Descriptions from WHOI and Census of Marine Life.

Pump

Supplied Name: Yabby Pump

Supplied Description:

Hand pump for use in shallow water or mudflats

Instrument Type

Generic Name: Pump

Generic Description:

A pump is a device that moves fluids (liquids or gases), or sometimes slurries, by mechanical action. Pumps can be classified into three major groups according to the method they use to move the fluid: direct lift, displacement, and gravity pumps

Parameters

Supplied Name	Supplied description	Supplied Units	Standard Name
family	taxonomic family	unitless	family
taxon	more specific taxonomic group	unitless	taxon
locality	location of specimen collection	unitless	region
cruise_id	cruise identifier	unitless	cruise_id
latitude	latitude; north is positive	decimal degrees	lat
longitude	longitude; east is positive	decimal degrees	lon
depth	collection depth	meters	depth
collection_method	type of gear used for collection	unitless	instrument

Database

Geospatial Access

Contribute Data

Dataset: Cannon_2013_T1: Collection and locality information