Deployment: KM0608

Deployment: 
KM0608
Chief Scientist: 
Fernando Santiago-Mandujano (University of Hawaii)
Synonyms: 
HOT-179
Platform:
Platform Type:
 vessel
Start Date: 
2006-03-08
End Date: 
2006-03-12
Location: 
Near Hawaii (22.75 N, 158 W)
Description

Original data are available from the NSF R2R data catalog

The objective of this cruise was to maintain a collection of hydrographic and biogeochemical data at the Hawaii Ocean Time-series (HOT) stations. Five stations were to be occupied during the cruise, in the following order:

1) Station 1, referred to as Station Kahe, is located at 21 20.6'N, 158 16.4'W and was to be occupied on March 8 for about 2 hours.

2) Station 2: ALOHA (A Long Term Oligotrophic Habitat Assessment) is defined as a circle with a 6 nautical mile radius centered at 22 45'N, 158W. This is the main HOT Station and was to be occupied for 3 days from March 9 to 11.

3) Station 51, is the site of the MOSEAN Mooring, located at 22 46.009'N, 158 5.533'W was to be occupied on the 4th day of the cruise for about 30 minutes.

4) Station 50, is the site of the WHOTS Mooring, located at 22 46.1 N, 157 53.4 W was to be occupied on the 4th day of the cruise for about 30 minutes.

5) Station 6, referred to as Station Kaena, is located off Kaena Point at 21 50.8'N, 158 21.8'W was to be occupied on the 4th day of the cruise for about 2 hours.

A single CTD cast was to be conducted at Station 1 to collect continuous profiles of various physical and chemical parameters. Water samples were to be collected at discrete depths for biogeochemical measurements.

Upon arrival at Station ALOHA, the free-drifting sediment trap array was to be deployed, followed by four shallow CTD casts (<200 m) to collect water for incubation experiments. The sediment trap array was to stay in the water for about 52 hours. After this, an array with incubation experiments (gas array) was to be deployed for 24 hours. A full-depth CTD cast was to be conducted afterwards, followed by 1000-m CTD casts at strict 3 hour intervals for at least 36 hours for continuous and discrete data collection, ending with another full-depth CTD cast.

One free-drifting array was to be deployed for 12 hours for incubation experiments on March 10.

A plankton net was to be towed near noon and midnight for 30-min intervals on March 9 and 10 at Station ALOHA.

After CTD work at Station ALOHA was accomplished, the ship was to transit to recover the floating sediment trap array.

After recovering the sediment traps, the ship was to transit to Sta. 51 to conduct a 200-m CTD cast, and then back to Station ALOHA to conduct two more 1000-m CTD casts, and light casts (PRR, AC9/FRRf). At the end of these operations, the ship was to transit to Station 50 to conduct a 200-m CTD cast. After conducting these operations, the ship was to transit to Station 6.

A near-bottom CTD cast (~2500 m) was to be conducted at Station 6 including salinity samples for calibration, after which the ship was to transit back to Snug Harbor.

A Profiling Reflectance Radiometer (PRR) was to be deployed for half-hour periods near noon time on March 8, 10 and 11.

A package including a Wet Labs AC9, a Chelsea Fast Repetition Rate Fluorometer (FRRf), and a SeaBird Seacat was to be used to profile the upper 200 m at Sta. ALOHA at noon time on March 10 and 11, and in the early morning on March 11.

An Automated Trace Element Sampler (ATE) was to be deployed once on March 11.

One ARGO float was to be deployed at Station ALOHA on the last day of the cruise by K. Heinze.

The following instruments were to collect data throughout the cruise: shipboard ADCP, thermosalinograph, and two anemometers.